USA
Catalog   /   Home & Renovation   /   Autonomous Power Supply   /   AVR

Comparison Ukrtehnologija Prime 9000 9 kVA vs Ukrtehnologija Standard 9000 9 kVA

Add to comparison
Ukrtehnologija Prime 9000 9 kVA
Ukrtehnologija Standard 9000 9 kVA
Ukrtehnologija Prime 9000 9 kVAUkrtehnologija Standard 9000 9 kVA
Outdated Product
from $383.20 up to $513.76
Outdated Product
TOP sellers
AVR typetRIACtRIAC
Input voltage230V (1 phase)230V (1 phase)
Power9 kVA9 kVA
Specs
Input voltage range60 – 310 V60-265 V
Output voltage accuracy (±)3 %3 %
Response time20 ms20 ms
Voltmeterdigitaldigital
Sockets
Terminal connection
Protection levels
Protection
overheating
short circuit
overload
over / under voltage
overheating
short circuit
overload
over / under voltage
General
Installation
wall
floor
wall
floor
Coolingactiveactive
IP protection rating2020
Carrying handle
Dimensions525x358x265 mm385x410x180 mm
Weight35 kg20 kg
Added to E-Catalogfebruary 2019june 2014

Input voltage range

The voltage range at the input of the stabilizer, at which it is able to operate in normal mode and supply a constant voltage of 230 or 400 V to the load (depending on the number of phases, see above). The wider this range — the more versatile the device, the more serious power surges it can extinguish without going beyond the standard operating parameters. However, note that this parameter is not the only, and not even far from the main indicator of the quality of work: a lot also depends on the accuracy of the output voltage and the response speed (see both points below).

Also note that some models may have several modes of operation (for example, with 230 V, 230 V or 240 V output). In this case, the characteristics indicate the "general" input voltage range, from the smallest minimum to the largest maximum; the actual ranges for each particular mode will vary.

In addition, there are stabilizers that can operate outside the nominal input voltage range: with a slight deviation beyond its limits, the device provides relatively safe output indicators (also with some deviations from the nominal 230 or 400 V), but if the drop or rise becomes critical, it works appropriate protection (see below).

Carrying handle

The presence in the design of the stabilizer of a special handle for carrying the device from place to place. This feature is useful primarily for powerful and, accordingly, heavy devices, which would be inconvenient to hold directly by the case. And in the most "weighty" models, which are not designed to be carried alone, there are several handles.