Comparison Anex IQ 2 in 1 vs Cybex Balios S 2 in 1

Strollers in which the carrycot has a foldable design. This feature simplifies the storage and transportation of the stroller, when folded, the foldable carrycot takes up much less space.

The carrycot carry handle for carrying is mounted on the carrycot and makes it easy to carry it from place to place — for example, if you need to remove the carrycot for cleaning and then put it back. The handle can have a different shape — in the form of an arc attached to the sides of the carrycot, in the form of a hood cutout, etc.

In strollers with this function, the seat unit can be fixed in one of two positions, to choose from: facing the parent (against the direction of movement) or facing away from the parent (in the direction of movement). Each option has its advantages: in the first case, the baby can see a familiar face and is less nervous, and when located in the direction of movement, it is more convenient for him/her to view the world around him/her.

A window made of transparent or translucent material, built into the hood that covers the cradle or seating unit. In the version with a walking block, the viewing window is usually located so that the parent can see the baby directly while moving, without being distracted from controlling the stroller. In cradles, the parent can see the child through a window by approaching the stroller from the side of the hood (that is, on the opposite side of the handle); implementations with a window in the front hemisphere of the hood are less common. In addition, a baby lying in a cradle can usually see the outside world through the window (primarily the sky above the stroller). The viewing window can be made in the form of oilcloth or a mesh mosquito net, through the holes of which air freely penetrates, but insects and small debris raised by the wind are retained.

The depreciation theme is designed to absorb shocks and bumps from uneven road surfaces. The most popular nowadays are models with spring systems; you can also meet the shock absorption of the articulated and double types, and in quite a large number of strollers this function is absent at all. Here are the main features of each option:

— Spring type. Depreciation systems based on classical springs mounted on individual wheels. They are used in all types of strollers except classic strollers (see "Design"). The simplest models use a single set of springs, while more advanced models may include additional comfort features such as SAS shock/vibration absorption technology. Whatever the case, depreciation systems of this type are simple yet practical, efficient and reliable.

— Articulated type. The type of depreciation used in strollers with carrycots - classic, universal, transformers. The frame, on which the carrycot or seat unit is installed, in such models is attached to the base of the stroller with the help of special bridges, which play the role of depreciation. As bridges can be used belt hinges, such systems can also refer to the articulated. Anyway, this type of depreciation is excellent for carrycots. First of all, the stroller is as smooth and soft as possible, which contributes to the comfort and deep sleep of the child (and the parent to drive...the stroller is much easier, especially on uneven surfaces). Secondly, the carrycot on such a stroller can be rocked back and forth, lulling the baby. On the other hand, such systems are poorly suited for stroller frames with swivel front wheels; and the failure of one absorber leads to tilting of the carrycot.

— Double. This term most often refers to the spring systems described above with additional shock absorbers on the frame of the stroller. Such systems help to maximize vibration reduction and can approach articulated systems in terms of efficiency (see above). On the other hand, the softness of the suspension can be inconvenient when overcoming curbs and other bumps: to raise the front wheels of the stroller, you have to press hard on the handle.

— Is absent. Strollers without depreciation are not suitable for uneven surfaces: in such conditions, the stroller will be shaken violently, which creates both discomfort for the baby and inconvenience for the parent. On the other hand, such models have advantages over strollers with depreciation. First, due to the lack of unnecessary parts, they are much cheaper, and the design itself is as simple as possible and at the same time reliable. Secondly, without depreciation, it is easier to overcome curbs and other obstacles: to raise the front wheels, it is enough to push a small pressure on the handle. Thirdly, such strollers rock less on smooth, wave-like uneven surfaces.

The possibility of installing a child car seat on the chassis of the stroller. This feature can be very useful on car trips: the car seat can be used both in the car and as a seat unit for a stroller, and the main seat unit can be left at home so that it does not take up space in the boot. Note that some models with this function are initially equipped with a suitable car seat; if it is purchased separately, you should pay special attention to compatibility with your stroller.

Possibility to adjust the stroller handle in height. This function allows you to optimally adjust the length of the handle to the height of the parent. It will be especially useful if the parents are of different heights, and each of them regularly carries a stroller.

Typically, height adjustment is carried out by lowering or raising the upper segment of the handle, and in advanced implementations a telescopic mechanism is responsible for it. The retractable handle makes the stroller more adaptable to different situations and conditions. For example, it can be lengthened for more comfortable walking or shortened for ease of use in tight spaces.

The main material from which the frame of the stroller is made.

— Aluminium. The material used in the vast majority of modern strollers of all price categories. This is due to a number of advantages: aluminium is light and at the same time durable, it does not rust and is not afraid of moisture, it lasts a long time, it looks nice, but it is relatively inexpensive — somewhat more expensive than steel, but noticeably cheaper than more advanced materials like carbon.

— Steel. Steel frames are as strong as aluminum frames, and they are much cheaper. On the other hand, they are quite heavy, so steel is used less often in strollers.

— Magnesium alloy. Premium Material: Stronger and more durable than aluminium, just as lightweight, but at a significantly higher cost. It is extremely rare, in single models of expensive strollers.

— Carbon. Another high-end material: carbon fiber filled with plastic. This combination gives excellent strength - comparable to steel — at a very low weight. However, carbon is very expensive, and these advantages are rarely decisive for strollers — in most cases simpler materials are enough. That is why carbon frames have not become widespread.

— Plastic. Plastic itself is easy to manufacture and relatively cheap; it is also not as cold to the hands in cool weather as aluminum or steel. However, modern strollers very rarely have frames made of this material. The fact is that low-cost varieties of...plastic are not strong enough for this; and high-quality varieties cost accordingly - their price is close to aluminum, or even higher.

— Fibreglass. In this context, "fibreglass" typically refers to glass fibers mixed with plastic filler. Unlike conventional window glass, glass fibers are flexible and strong. The plastic filler enhances durability by offering scratch and tear resistance. The result is a material that is lightweight and very strong. However, fibreglass is prone to brittleness, especially with point impacts, and is susceptible to abrasion. As a result, it isn't widely used in strollers.

Strollers in which the rear wheels are mounted on completely separate stands, without any additional bridge between them.

The main advantage of rear wheels without an axle is that the legs of the parent following the stroller do not touch the bridge between the wheels. In addition, this feature slightly increases the mobility (allows the stroller to pass between the wheels lying on the road objects, without clinging to them with the axle).