Comparison Canon XA11 vs Canon XA15

An image stabilization method provided in the design of a video camera. The stabilization function itself is designed to compensate for small camera shakes so that they are not noticeable in the image. This is especially true when shooting handheld, and in fact most modern models are designed specifically for such usage. According to the method of work, there are such options:

— Optical. A special mechanism with a system of gyroscopes and movable lenses, installed directly in the lens, is responsible for the operation of such stabilization systems. It introduces a correction for all tremors, vibrations, etc., and the “picture” falls on the already stabilized sensor. Optical systems are considered the most advanced and efficient, because. their work allows you to use the entire area of the sensor, fully exploit its capabilities and provide good image quality. Among the shortcomings, it is worth noting the increase in the cost and weight of the cameras, as well as a slight decrease in the reliability of the optics. At the same time, these moments are most often not critical, and stabilizers of this type can be used even in simple and inexpensive models.

— Electronic. Electronic stabilization is carried out due to the fact that not the entire area of the sensor, but only some of it, is involved in the formation of an image for a frame. Simply put, the camera electronics "takes into account" a certain area of the sensor and...transfers the image from it into the frame; and at small displacements, this "area of attention" is also displaced, due to which the visible image remains motionless. The advantages of electronic systems are simplicity of design, lightness, compactness and high reliability; they can be used with even the simplest lenses installed in pocket cameras (see “Features”). Their main disadvantage is the need to reserve a part of the sensor, which reduces the size and resolution of the actually involved area and adversely affects the image quality.

— Optical / electronic. In such systems, both the methods described above are used — both the mechanism in the lens and the reserve on the sensor. This provides extremely high vibration compensation efficiency — the image remains stable even in such conditions in which any single method would be useless. On the other hand, the disadvantages of both options also remain relevant, and the cost of cameras with this feature is quite high.

The data transfer speed provided by the camera when recording video. This parameter is also called bitrate (i.e., the number of bits per unit of time). For any file format used for recording, the general rule is that the higher the bitrate, the better the image quality (especially for formats that use lossy compression). On the other hand, high speed have appropriate requirements for the capabilities of the memory cards used — for more details, see "Memory card support"; and it increases the size of the file accordingly. Therefore, many modern camcorders are able to work with different bitrates; this allows you to choose the best option depending on what is more important for you at the moment — maximum quality or the ability to work with a slow card.

At the same time, we note that in terms of quality, this parameter is important mainly for professional video shooting. If you need a camera for amateur purposes, there is no need to look for the maximum bitrate: after all, such models (and memory cards for them) cost accordingly.

— Component. An interface for transmitting a video signal in an analogue format, dividing the “picture” into three components (hence the name) and transmitting each of the components via a separate wire. Due to this, a fairly high image quality and good bandwidth are ensured: the component interface surpasses S-Video in quality and is suitable even for high definition (HD) operation. On the other hand, it does not provide working with audio — so if you want to hear sound, you will have to take care of a separate channel for its transmission. On stationary video equipment, three separate RCA connectors (“tulip”) are usually used for component connection, the same format can be used in professional video cameras, but in amateur models (see “Features”) the component output has a more compact design — for example, in the form of a 3.5 mm mini-jack socket.

— USB. A universal interface used in computer technology to connect various external peripherals. It is extremely widespread, available in the vast majority of modern desktop PCs and laptops. When connected to a computer via USB, the camcorder also functions as a peripheral device. The most popular use of this connection is for copying footage, but it may include other options depending on the model: remote control of the camera, firmware upgrade, USB streaming, webcam operation (see "Features") . In addition, it is this...interface that is used for direct copying to the HDD (ibid.); in this case, the camera plays the role of a control device, and the storage plays the role of a peripheral.

— HDMI. High-speed digital interface for transmitting video and audio signals over a single cable. Has enough bandwidth to work with high-definition video and multi-channel audio. The HDMI output in the camcorder is very convenient for using it as an external player when viewing footage: the vast majority of modern TVs and monitors have at least one input of this standard. It is also widely used in other video equipment.

— S-video. Interface for transmitting video signal in analogue format. Like component connection (see above), this standard does not work with audio and uses separate transmission of signal components — however, in this case there are 2 of these components, not 3. This, on the one hand, somewhat reduces the quality of the “picture”, on the other — allows you to use one cable and one connector instead of three. But one of the significant shortcomings of S-Video is the impossibility of working with HD — the bandwidth is only enough for a standard definition signal.

— IEEE 1394. Also known as FireWire. Although IEEE 1394 is now a very versatile interface used in computer technology, it was originally used specifically in camcorders — primarily to “capture” video from a magnetic tape and convert it to files. This application is relevant even now — almost all cameras with miniDV (see "Media type") have such an output, it is also found among other devices, mostly professional ones (see "Features"). A FireWire connection can provide other options – similar to the USB described above.

— SDI. A digital interface used to transmit video and audio signals, as well as service information. The bandwidth of SDI is somewhat lower than that of HDMI, but for a number of reasons it is much better suited for professional use and is quite widely used in related video equipment, including cameras. But in amateur models (see "Features"), the outputs of this standard are not installed.

— AV-output. Connector for transmitting video and audio in analogue format. This interface is also called "composite", but the classic composite input or output uses several RCA connectors (one for video and one for mono audio, or two for stereo). In camcorders, this interface is usually made in the form of a 3.5 mm jack (mini-jack), and appropriate cables are used to connect to full-size video equipment. The main advantage of the AV-output over other analogue standards (component and S-Video, see above) is the ability to transmit video and audio simultaneously. At the same time, in terms of image quality, it loses to the mentioned options due to the fact that all components of the video signal are transmitted over one cable and the resistance to interference is low.

— Microphone input. Connector for connecting an external microphone to the camcorder. This feature is important in cases where the microphone needs to be placed at some distance from the camera — for example, when shooting TV programs or reports. Professional models (see "Features") may have several of these inputs, and they can also be used for multi-channel audio recording and other specialized applications. Please note that XLR microphone connectors are listed separately in our catalog (see below).

— XLR microphone input. The presence in the design of the camera at least one input for an external microphone using an XLR connector. The role of the external microphone is described in detail above. As for XLR, it is an interface widely used in professional audio and video equipment, including cameras. Its main feature is the possibility of the so-called balanced connection; this connection is highly resistant to interference even with long cable lengths and is well suited for use with high quality microphones. The connector itself is quite large, but given the sizes of professional video cameras, this is not a drawback. It is worth noting that 1 channel of sound is transmitted through one XLR input, so several of them can be provided — usually two, for stereo recording.

— Headphone jack. The presence of a headphone output in the design of the video camera. The main function of this feature is to listen to the sound that accompanies the captured video. Headphones generally provide better quality than the built-in speaker (see "Features") and are even more comfortable in some situations, such as in a noisy environment or when silence is required. Another purpose of the headphones is to control the sound characteristics right during the recording process, but this feature is usually found in professional models (see "Features"). Most often, a standard 3.5 mm mini-jack socket is used as a connector, but there are other options; all of them are included in this section — except for the XLR described below.

— XLR headphone jack. The camcorder has a headphone output using an XLR connector. The features of the connector itself are described in detail above in the paragraph “XLR microphone input”, and the role of the headphones is described in the paragraph “Headphone output”. At the same time, we note that XLR, being a professional interface, is intended not so much for listening to recorded materials, but for other, more serious tasks — in particular, monitoring sound during filming.