Comparison DMS HF-12S vs RAVEN EFN004

The total number of cooking programs provided in the device.

The more this number — the more extensive the possibilities, the wider the choice of the user. However, note that a specific set of modes may be different, this point in each case should be clarified separately. See "Programmes" for details on specific modes.

Cooking programs provided in the device. The most common cooking programs are: fries, chips, chicken, meat, shrimps, fish, pizza, vegetables.

— Fries. The fryer offers a specialized automatic cooking program designed specifically for preparing dishes like crispy potatoes, mushrooms, or meat in batter. While these dishes can be cooked in any deep fryer, this program simplifies the process. With this program, users no longer need to manually monitor the cooking time and temperature. They simply load the ingredients, select the appropriate mode, start the cooking process, and wait for it to complete. In multi-ovens and air fryers, this type of cooking can be achieved with minimal amounts of oil or even without oil at all, providing healthier cooking options.

— Chips. The fryer offers a dedicated cooking program specifically designed for making potato chips, which are thin and crispy slices of potato. While chips can be cooked in any deep fryer, if the device does not have a built-in cooking program, users will need to manually configure the cooking parameters and closely monitor the process. Alternatively, the option to cook chips may also be available in multi-ovens and convection ovens (...see "Type"), expanding the cooking possibilities beyond traditional deep fryers.

— Chicken. A cooking program specifically designed for cooking chicken meat is commonly available in multi-ovens and air fryers. This program typically involves baking the chicken. However, deep fryers are less commonly equipped with this specific program. In deep fryers, the emphasis is usually on frying chicken with batter or without it.

— Meat. Program for cooking meat (veal, pork, etc.). It is used mainly in multi-ovens and air fryers, which means roasting meat.

— Shrimps. A cooking program specifically designed for cooking shrimps is commonly available in deep fryers, which typically allow frying shrimp in tempura batter. Air fryers and multi-ovens, on the other hand, may offer different cooking options for shrimps, such as boiling, particularly in the case of multi-ovens.

— Fish. Programme for cooking fish. In deep fryers (see "Type") fish is most often cooked in batter, in small pieces; it is possible to bake the whole fish, if the volume of the working space allows it in multi-ovens and air fryers.

— Pizza. A programme optimized for pizza making. The "Pizza" program, commonly found in multi-ovens, ensures that Italian dishes, as well as casseroles and pies, are cooked evenly on all sides. This program is designed to create a crispy crust on the top while maintaining a juicy filling inside.

— Vegetables. The "Vegetables" program, commonly available in multi-ovens, is characterized by its moderate temperature setting. It allows for slow and gentle heating of vegetables, similar to stewing. This program is ideal for preparing various vegetable-based dishes such as side dishes, stews, complex dishes and soup dressings.

— Auto-cooking. In addition to those described above, the design may also provide for other types of auto-cooking programs — for example, for mushrooms, barbecue, baking bread, etc.

— Frying. The frying mode provides work at a high temperature. And for deep-frying, the multi-oven can be equipped with special baskets.

— Grill. Specialized mode for cooking juicy steaks, golden crispy breadcrumbs, grilled fish, grilled vegetables, etc. Multi-ovens with this function are usually equipped with a special grill kit — a removable bottom with typical ribs and holes, small skewers for cooking meat or vegetable kebabs.

— Baking. The possibilities of this mode are in many ways similar to a conventional oven. Baking usually means the cooking of not only flour products, but also muffins, various casseroles, etc.

— Drying. The drying mode is used to remove moisture from various food items by subjecting them to prolonged, low-temperature heating and hot air circulation. This mode is commonly employed for dehydrating vegetables and fruits for long-term storage, preparing dried meat or fish for outdoor activities such as hiking, and other similar purposes.

— Defrosting. Special mode for gentle defrosting of frozen food. It maintains a low intensity of the multi-oven, so that the contents effectively “melt”, but at the same time do not bake.

— Reheating. Reheating refers to the process of warming up pre-cooked dishes...rather than cooking raw food. In the reheating mode, the temperature is maintained at a relatively low level to gently warm the food without overcooking it. Some models may offer an initial burst of intense heat followed by a lower temperature to efficiently heat the dish and then keep it warm.

— Heating. The preheat function is used to heat the cooking container before placing the ingredients inside. This mode quickly heats the bowl of the multifurnace to a high temperature, such as 200 °C, within a short period, typically 3-4 minutes. This ensures that the container is adequately heated and ready for cooking.

The cooking temperature provided by the device. Most models are adjustable, so this item indicates the operating temperature range.

Deep frying is carried out at temperatures from 130 to 190 °С200 °С. But high operating temperatures (over 200°) are less common.

Additional items included in the standard delivery set of the device. These can be all kinds of grates, trays, mesh baskets, skewers, pizza pans, tongs, potholders and other auxiliary devices to ensure convenient cooking.

The main material from which the body of the device is made.

— Plastic. Plastic offers several key advantages including its affordability, ease of processing and wide range of colors. These factors contribute to the cost-effectiveness and appealing appearance of kitchen appliances. While plastic may not be as durable as metal, it is still reliable enough for regular household use. Consequently, many appliances designed for home use are made of plastic. However, it's important to note that plastic cases are sensitive to overheating and can melt at relatively low temperatures. Over time, they may also develop scratches.

— Metal. Metal is highly durable and reliable, making it suitable for powerful professional appliances that are frequently used, such as deep fryers in cafes and restaurants. It can withstand high temperatures without issue. However, metal cases are more expensive to manufacture compared to plastic cases due to the complexity of the production process. Metal also has high thermal conductivity, which can affect heat distribution. As a result, in household devices, it is common to find a combination of metal and plastic in their construction. In some cases, only the central part of the case is made of metal, while the remaining parts are made of plastic. This helps to balance durability, cost, and thermal conductivity.