USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Bathroom & Shower   /   Taps

Comparison Grohe Multiform 3270800A vs Hansgrohe Logis 71402000

Add to comparison
Grohe Multiform 3270800A
Hansgrohe Logis 71402000
Grohe Multiform 3270800AHansgrohe Logis 71402000
Outdated ProductOutdated Product
TOP sellers
Main
Shower wall holder included. Possibility to set the minimum flow rate of 2.5 L/min
Adjustable temperature limit. Suitable for instantaneous water heaters. Durable chrome finish. AirPower technology. Auto-switching bath/shower.
Suitable for
for a bath
for taking a shower
for a washbasin
for a bath
for taking a shower
for a washbasin
Tap typesingle leversingle lever
Spout
Shapestraightstraight
Swivel
Long
Jet depth461 mm
385 mm /spout — 300 mm/
Specs
Stop valveceramicceramic
Cartridge diameter
46 mm /SilkMove/
Water flow9.5 L/min
22 L/min /at 3 bar/
Shower / bath
Shower set2 modes
Hose length150 cm
Diverterleverbutton
Shower / bath auto switch
Installation
Installationwall mounted (vertical)wall mounted (vertical)
Mounting holes2 шт2 шт
Inlet communication
rigid tubes
G 1/2"
rigid tubes
 
General
Materialbrassbrass
Finish
chrome
chrome
Tap height168 mm
Country of brand originGermanyGermany
Manufacturer's warranty5 years5 years
Color
Added to E-Catalogaugust 2018september 2017

Jet depth

Distance from the fixing point (for vertically mounted taps) or from the centre of the mounting hole (for horizontally mounted taps) to the middle of the spout. It is a characteristic that determines the "reach zone" of the tap.

Cartridge diameter

The diameter of the cartridge used in the tap.

The cartridge is called the "heart" of the tap — the part directly responsible for adjusting the pressure and/or temperature of the water (in some models — also for switching between spout and shower). The main dimension of this part is precisely the diameter. However, in fact, this size becomes relevant only if it is necessary to replace the cartridge. But when choosing a tap, it does not really matter — from the point of view of characteristics, only the overall dimensions of the device depend on the diameter of the cartridge, and then quite approximately and without a fundamental difference between individual models.

Water flow

The maximum water flow during the operation of the tap, in other words, the maximum amount of water that it can pass through in a minute. This characteristic is important, foremost, for models designed for baths (see "Suitable for"): the greater the throughput, the faster the bath will fill. However, the meaning of this paragraph is not limited to this. First, flow information can be useful in certain calculations related to water supply — for example, to calculate the required pump capacity. Secondly, high-end taps can be equipped with aerators to achieve a powerful and efficient jet with low water consumption; the consumption indicated in the characteristics allows you to evaluate the efficiency of such devices in comparison with analogues.

Shower set

In most cases, this is not one accessory, but a whole set that allows you to use the tap for showering. A mandatory element of the shower set is a shower head, in most cases it is supplemented with its own hose. In addition, the design may provide a mount for a watering can — on the wall or directly on the tap's body (for the second option, see below). But the purpose and functionality of the shower set may be different, depending on the specialization of the tap itself (see "Suitable for"). So, in bath and shower models, water can be supplied either through a spout or through a shower set, and an appropriate switch is provided for selection (sometimes automatic, see below). Shower-only taps do not have this switch. In models for washbasins, the shower set is designed for the so-called hygienic shower — washing certain parts of the body (primarily the groin area, etc.); the watering can for such a shower is small in size and is equipped with its own button that turns the water on and off. There are even kitchen taps with this function — the shower performs the same function as the pull-out spout. And the number of modes may not be limited to one. Several hand shower modes allow you to get a shower water jet of your favour — from classic small streams to one continuous stream, with all sorts of variations. The more settings provided, the wider the choice.

Hose length

The length of the hose provided in the design of the tap. This is a secondary parameter, since the hose is selected by the manufacturer in such a way that it is comfortable to use it for its main purpose — for taking a shower. But for tall people, the standard length may not be enough, so it is appropriate to know its dimensions for greater comfort and ease of use.

Diverter

A diverter is a device that switches a water flow between spout and shower head. The design of such a device and the way it is controlled can be different, in modern taps you can mainly find the following options:

— Button. Diverters of this type have the form of a button; but its design depends on the characteristics of a particular tap. In relatively simple mechanical models (most of them), the button is also made mechanical, and to switch from spout to shower, you need to pull it up. And switching in the opposite direction — from a shower to a spout — can often be carried out not only manually, but also automatically, when the water is turned off (see "Features — Shower / bath auto switch"). In some taps, auto-switching can also be blocked by the user (usually by turning the button in the up position).
In turn, in advanced electronic devices, such a diverter is made in the form of an electric button that closes the contacts that control the valve.

— Lever. Diverter in the form of a rotary lever. Most often, this lever directly controls the valve that switches the flow of water. This design is considered somewhat less reliable than push-button, but it is much simpler and cheaper, which makes it very popular — especially in relatively inexpensive taps. But in premium devices, this type of diverter can operate according to other, more advanced principles — for example, a lever can work as an electronic switch.

— Turning the spout. A r...ather rare and specific option: the role of the lever that controls the flow of water is performed directly by the spout, to the base of which a shower hose is connected. Such a control, usually, works as follows: while the spout is perpendicular to the tap body, water flows through it, and to switch to the shower, the spout turns, being under the tap. Such devices look interesting, and are convenient to use. On the other hand, they are quite complex and expensive, and the spout itself, for a number of reasons, is typically made quite short. Therefore, this variant has not gained popularity.

— Removable. A diverter located outside the body — usually between the tap itself and the spout. Typically, on one side of such a device there is a control element (most often a small lever or a rotary tap), and on the other, a pipe for connecting a shower hose. And the name "removable" suggests that this part can be easily removed if needed — unlike, for example, push-button or lever solutions, which are usually built directly into the tap body and are very difficult to dismantle or replace. Accordingly, after removal, the diverter can either be replaced with another one, or removed altogether by connecting the spout directly to the tap. This is the main advantage of this option: in case of malfunctions in the diverter, it can be removed without any problems for repair or replacement, while the tap (with the exception of the “shower part”) remains fully operational.

Inlet communication

The type of water pipes the tap is designed for.

— Hoses. With a flexible connection type, polymer tubes (hoses) are used to connect the tap to the water supply, which can bend well and are reinforced with a metal mesh for strength. This ensures ease and versatility of attachment — thanks to the flexibility of the pipe, it can be carried even in cramped places. On the other hand, such a supply is less durable and reliable than a rigid one. It is mainly used in models for kitchens and sinks (see "Suitable for"). Installation pipes may be included in the package of the tap; this point should be clarified separately.

— Rigid pipes. Such taps are designed for installing directly to metal water pipes. The advantage of this type is reliability and strength, the disadvantage is significant restrictions on the installation site: you either have to put the tap where the pipes were made during construction, or redo the communications, which is associated with great inconvenience and cost. On the other hand, such taps are usually used for bathtubs and showers, and in modern bathrooms, typically there are no problems with unsuccessful installation of pipes.

Tap height

The height of the tap, measured from its base or lowest point to the highest point of the spout. The height of the spout partly determines the installation possibilities — in fact, this is the minimum vertical free space that is required for the tap. In addition, in models with horizontal installation (see "Type of installation"), the spout height is related to the jet height (see below).
Grohe Multiform 3270800A often compared
Hansgrohe Logis 71402000 often compared