USA
Catalog   /   Computing   /   Components   /   SSD

Comparison Apacer Panther AS350X AP512GAS350XR 512 GB vs Apacer Panther AS350 AP512GAS350-1 512 GB

Add to comparison
Apacer Panther AS350X AP512GAS350XR 512 GB
Apacer Panther AS350 AP512GAS350-1 512 GB
Apacer Panther AS350X AP512GAS350XR 512 GBApacer Panther AS350 AP512GAS350-1 512 GB
Compare prices 1Outdated Product
TOP sellers
Placementinternalinternal
Size512 GB512 GB
Form factor2.5"2.5"
InterfaceSATA 3SATA 3
Technical specs
Memory type3D TLC NAND3D TLC NAND
Write speed540 MB/s540 MB/s
Read speed560 MB/s560 MB/s
Shockproof1500 G1500 G
MTBF1.5 m h1.5 m h
Write IOPS80 K80 K
Read IOPS87 K87 K
TBW425 TB320 TB
DWPD0.8 times/day0.6 times/day
Manufacturer's warranty3 years3 years
General
TRIM
Size100x70x7 mm100x70x7 mm
Weight60 g
Added to E-Catalogfebruary 2021august 2020

TBW

The abbreviation TBW stands for drive time between failures, expressed in terabytes. In other words, this is the total amount of information that is guaranteed to be written (rewritten) to this module. This metric measures the overall reliability and lifespan of a drive—the higher the TBW, the longer the device will last, all other things being equal.

Note that knowing the TBW and the warranty period, you can calculate the number of rewrites per day (DWPD, see the relevant paragraph), if the manufacturer did not specify these data. To do this, use the formula: DWPD = TBW / (V * T * 365), where V is the drive capacity in terabytes, T is the warranty period (years). As for specific numbers, there are a lot of drives on the market with a relatively low TBW — up to 100 TB ; even these values are often sufficient for everyday use for a considerable amount of time. However, models with TBW at the level of 100 – 500 TB are more common. Values of 500 – 1000 TB can be classified as "above average", and in the most reliable solutions this figure is even higher.

DWPD

The number of full overwrites per day allowed by the design of the drive, in other words, how many times a day the entire drive can be guaranteed to be overwritten without fear of failures.

This parameter describes the overall reliability and durability of the drive. It is similar in meaning to TBW (see the relevant paragraph), one value can even be converted to another, knowing the warranty period: TBW = DWPD*V*T*365, where V is the drive capacity in terabytes, and T is the warranty period in years . However, DWPD is somewhat more specific: it describes not only the total time between failures, but also the limit on the number of rewrites per day; if this limit is exceeded, the drive may fail earlier than specified in the warranty. However, even small DWPD values — 0.5 – 1 time per day, or even less than 0.5 times a day — often turn out to be sufficient not only for simple everyday use, but even for professional tasks. Higher rates — 1 – 2 times a day or more — are rare; at the same time, it can be both high-end and low-cost SSD modules.
Apacer Panther AS350X often compared