USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Kitchen Sinks & Accessories   /   Kitchen Sinks

Comparison Fabiano Quadro 68 R10 8216.401.0074 680x440 vs Fabiano Quadro 68x44 680x440

Add to comparison
Fabiano Quadro 68 R10 8216.401.0074 680x440
Fabiano Quadro 68x44 680x440
Fabiano Quadro 68 R10 8216.401.0074 680x440Fabiano Quadro 68x44 680x440
Outdated ProductOutdated Product
TOP sellers
Main
The bends of the walls of the bowl have a radius angle of 10 mm.
Mount type
mortise overhead
mortise back-to-back
tabletop
 
mortise back-to-back
tabletop
Material
stainless steel /AISI 304/
stainless steel
Material thickness1.2 mm1.2 mm
Shaperectangularrectangular
Working surface
Overflow
In box
siphon /depending on configuration/
siphon
General
Surface type
 
matte
glossy
 
Minimum cabinet width (base)700 mm700 mm
Working surface size680x440 mm680x440 mm
Mortise hole size (overhead)660x420 mm
Mortise hole size (back-to-back)681x441 mm
Mortise hole size (countertop)640x400 mm
Main bowl size (LxWxD)650х400x200 mm640x400x200 mm
Country of originItalyItaly
Manufacturer's warranty2 years2 years
Color
Added to E-Catalogapril 2023november 2019

Mount type

The standard way to mount the sink. Some models allow multiple ways to install, at the user’s choice. The specific options may be:

Mortise overhead. Models fitted in the slot of the worktop in such a way that the side of the sink is significantly above the surface of the worktop. The method of installation is quite simple, but the side raised above the table is in some cases inconvenient.

Mortise back to back. Models installed in the slot of the worktop so that the side of the sink is at the level of the worktop. Popular due to the ease of installation and convenience in cleaning: if necessary, water and other contaminants can be «driven» by a cloth from the table top directly to the sink. It is true that there is a small gap between the countertop and the sink where pollution can accumulate; but this disadvantage is compensated by the ease of installation.

Tabletop. Models fixed at the bottom of the countertop - so that the role of the sides actually play the edges of the hole cut under the sink. This method is convenient for maximum convenience in cleaning: from the kitchen table you can easily wipe into the sink spilled liquid or small debris like crumbs, while the contamination will not accumulate in the gap between the sink and the table top (As opposed to butt mounting, see corresponding paragraph. ). At the same time,...the installation of such shells by itself is quite difficult.

Tabletop module. Quite specific installation method: the sink is installed on the floor top, replacing the table top. For such an installation, it is necessary that the box accurately corresponds to the sink in size, so this option is quite rare.

Surface type

Type of washing surface made of stainless steel (cf. «Body material»).

Glossy. Brilliant, mirror surface, distinguished by attractive appearance. On the other hand, on such a surface quickly appear contamination and mechanical damage (traces from dried water, fingerprints, scratches, etc.), so to preserve the appearance it needs to be cleaned regularly, or even polished.

Matte. The matte surface does not look as bright as glossy - it is fainter, without pronounced reflections. On the other hand, such surfaces are less susceptible to contamination and damage: fingerprints, traces of dried water, scratches and scuffs on such surfaces are not as visible as on gloss.

Textured. Surface having a relief pattern with a depth of a fraction of a millimeter. This material is most convenient and practical from the point of view of maintenance, it perfectly masks contamination and is well resistant to scratches. The main drawback of textured surfaces is higher cost than matt and glossy. In addition, contamination and bacteria can accumulate in grooves, so clean such sinks should be with special care.
Fabiano Quadro 68x44 often compared