Comparison Grunhelm GW-441 vs Divoom Mocha

— Bluetooth. Wireless technology for transmitting sound from mobile phones, tablets, etc. Allows you to connect a device wirelessly at a short distance from the signal source. The quality and overall capabilities of Bluetooth vary depending on the version:

Bluetooth 4. Each version brings improvements relative to the previous one. So in version 4.0, three standards were actually combined: traditional Bluetooth, a high-speed channel and an energy-saving mode for small amounts of data. This allowed us to optimize channel usage and battery consumption. In version 4.1. Noise immunity has been enhanced when working next to 4G LTE modules. And version 4.2 introduced mainly general improvements in speed and security.

Bluetooth 5.0. One of the most important innovations of the Bluetooth 5.0 standard is the expansion of the capabilities of the BLE (Bluetooth Low Energy) mode: if necessary, the device can increase the range by reducing the speed, or speed up transmission by reducing the range. In addition, a number of improvements have been introduced regarding simultaneous work with multiple connected devices.

- Bluetooth 5.1. A significant upgrade in version 5.1 was the ability to accurately position the signal transmitter (receiver). If previous versions could only determine distance, then version 5.1 can also determin...e direction. Thus, navigation began to function better and more accurately, which improved work with the smart home system, searching for connected devices, etc. In addition to this, the improvements again concerned saving energy consumption and simultaneous work with several connected devices.

- Bluetooth 5.2. The next update, after 5.1, is Bluetooth 5th generation. The main innovations in this version are a number of security improvements, additional optimization of power consumption in LE mode and a new audio signal format for synchronizing parallel playback on multiple devices.

— Bluetooth 5.3 The Bluetooth v 5.3 wireless communication protocol was introduced at the dawn of 2022. Among the innovations in it, they accelerated the process of negotiating a communication channel between the controller and the device, implemented the function of quickly switching between the operating state in a low duty cycle and a high-speed mode, and improved the throughput and stability of the connection by reducing susceptibility to interference. When unexpected interference occurs in Low Energy mode, the procedure for selecting a communication channel to switch from now on has been accelerated. There are no fundamental innovations in protocol 5.3, but a number of qualitative improvements are evident in it.

- Bluetooth 5.4. The version was presented at the beginning of 2023, the range and data exchange speed were increased. Also in Bluetooth v 5.4, the energy-saving BLE mode has been improved. This protocol uses new security features to protect data from unauthorized access, has increased connection reliability by selecting the best channel for communication, and prevents connection losses due to interference.

—Mini-Jack (3.5 mm). Standard Aux audio input for connecting speakers to an audio source, such as a laptop or smartphone.

- USB. The presence of a USB connector allows you to connect a flash drive, mobile phones, MP3 players and other similar peripherals to the portable speakers. Accordingly, such models have a built-in player and allow you to use connected gadgets exclusively as a drive.

- Card reader. Like the USB described above, this item implies the presence of a built-in player in the acoustics. And the card reader allows you to use memory cards as a drive on which songs will be recorded.

— FM receiver. A built-in tuner allows the speaker system to work as a full-fledged FM radio receiver - this is the range that is popular among music radio stations (in particular, due to the ability to broadcast sound in stereo format).

A band is a specific part of the frequency range reproduced by an acoustic system. In single-way acoustics, only universal speakers are used that are responsible for the entire operating range. The presence of several bands means the use of specialized speakers, “tailored” to certain frequencies: for example, in two-way speakers, separate high-frequency “tweeters” are most often provided, and in three-way speakers the frequencies are divided into low, medium and high.

For different frequencies, the optimal speaker design will also be different; thus, the multi-band design allows for better sound quality. On the other hand, single-way speakers are lighter, more compact and less expensive. This is exactly what most portable speakers are, since Hi-Fi sound is not alien to them.

The SPL (Sound Pressure Level) parameter determines the sound volume of portable acoustics. This indicator is expressed in decibels (dB). The higher the SPL, the louder and farther the sound produced by the speaker travels. It is important to consider that decibel is a non-linear quantity. In other words, increasing the volume from 20 dB to 40 dB or from 40 to 80 dB does not mean increasing it by 2 times. Therefore, when making an assessment, it is most convenient to refer to comparative tables of noise levels in special sources.

The presence of a passive radiator in the design of the speaker system.

Such an emitter is a speaker cone that does not have its own coil and magnet — in other words, it does not produce sound itself, but only vibrates from the sound of other speakers. Like the phase inverter (see above), this part is intended to improve sound pressure and sound depth, especially at low frequencies; at the same time, the advantage of a passive radiator is the absence of a tube, due to which the design is simpler and more compact than with a phase inverter.

The model supports the ability to synchronize the operation of several speakers connected to one signal source. This solution allows you to realize truly stereo sound, improve the quality and power of sound reproduction, and also expand the stereo panorama. The only thing is that both speakers must support the appropriate connection type. Different brands may have their own technologies for combining speakers (JBL Connect, JBL PartyBoost, Sony Party Chain), or maybe a universal TWS.

- Speakerphone. Possibility of using portable sound system as a public address system for a mobile phone. In this mode, the sound system are connected to the device using Bluetooth, and the voice of the subscriber at the other end of the line is output not to the phone’s speaker, but through the speakers of the speaker system. This is often more convenient than holding the phone to your ear; In addition, speakerphone is useful if several people need to participate in a conversation.

— NFC chip. NFC is a short-range wireless communication technology (about 10 cm). It allows for many uses, but in portable speakers it is usually used as an addition to Bluetooth, making it easier to set up the communication. For example, a smartphone with an NFC module can simply be brought close to a speaker with the same function - and both devices will automatically recognize each other, and the user will only have to confirm the communication.

- Multipoint. A technology used in Bluetooth models that allows the speaker to connect to multiple devices simultaneously. Thanks to this, you can, for example, listen to music from a laptop, and when you receive a call on your mobile phone, switch the speakers to conversation. Different manufacturers have their own characteristics of this technology, and therefore, if the multipoint function is critical for you, it is worthwhile to...separately clarify the details of its operation in the selected model.

- Mobile app. The ability to operate the functions and settings of portable sound system through a mobile application for a smartphone or tablet. Communication between the device and gadgets is usually carried out via the Bluetooth wireless protocol. The proprietary software may provide tools for flexible sound settings (equalizer, bass boost, etc.), managing wireless connections, selecting a sound source, etc. Also, through a mobile application, it is often possible to update the firmware of portable sound system.

— Lighting effects. Such effects can be different - from a simple set of light bulbs blinking at a constant frequency, to advanced color and music systems that produce multi-colored patterns in time with the music being played. In any case, this function has more of an entertainment meaning and does not in any way affect the sound of the device.

Theoretically, a higher capacity allows to achieve greater battery life, but in fact, the operating time also depends on the power consumption of acoustics — and it can be very different, depending on the characteristics and design features. So this parameter is secondary, and when choosing it is worth paying attention not so much to the battery capacity, but to the directly claimed operating time (see below).

Operating time of a portable audio system without connecting to an external power source (network or USB port, depending on the capabilities). Note that manufacturers tend to indicate battery life in their specifications under optimal conditions for energy saving: at low volume, without using additional functions, etc. Therefore, in fact, this indicator may be noticeably lower than the claimed one, and speakers with a long operating time will not sound at full volume for the specified hours.

The presence in the design of the acoustics of a protected housing that prevents dust and moisture from entering the sensitive electronic filling. The specific degree of such protection in different models may be different — some speakers are able to endure even complete immersion under water ( waterproof), others are designed only for exposure to moderate rain. Therefore, the specifics of the protected case should be clarified separately according to the manufacturer's official data. However, anyway, such speakers will be more resistant to bad weather and better suited for outdoor use than those that do not have dust and water protection; therefore, if you are choosing acoustics for outdoor trips, it makes sense to pay attention to models with this function.

Some models with this feature are officially IP certified. The IP index includes two digits — for example, IP54. The first digit indicates the degree of protection against dust, the second — from moisture; the higher the number, the higher the corresponding degree of protection, detailed data can be found in special sources.