Comparison Harman Kardon Onyx Studio 7 vs Harman Kardon Go Play

The total sound power provided by the audio system at maximum volume, in other words, the total power of all the speakers provided by the device (including the subwoofer).

The higher the power, the louder the system will sound and the larger the area it can cover. On the other hand, high power significantly affects the price, dimensions, weight and power consumption of the device. In addition, when evaluating and comparing according to this indicator, it is worth considering some nuances. Firstly, some manufacturers go to the trick and give in the characteristics not the average, but the peak sound power; such numbers can be quite impressive, but they have very little to do with real loudness. So if it seems to you that the claimed power is too high, it's ok to clarify what exactly is meant in this case. Secondly, when comparing, it is worth considering the presence of a subwoofer — it plays an auxiliary role, but it can account for more than half of the total system power. Because of this, for equal total power, a device with a subwoofer may be quieter than a model without a subwoofer: for example, a 2.0 40W system will have 20W per main channel, while a 2.1 40W model may have 20W per subwoofer, and only 10 watts for the main speakers.

Sensitivity determines the intensity of the acoustics response to a signal of a certain level; Simply put, the higher this figure, the higher the volume of the speaker system will be at the same signal level. Note that in the case of audio systems, this parameter plays a secondary role: it is important for selecting acoustics for an amplifier, and here both of these components are in most cases optimally matched by the manufacturer to each other.

The total frequency range reproduced by the acoustics of an audio system. Measured from the lower threshold of the lowest frequency speaker to the upper threshold of the highest frequency: for example, in a 2.1 system with main speakers at 100 – 22000 Hz and a subwoofer at 20 – 150 Hz, the total value will be 20 – 22000 Hz.

In general, the wider the frequency range, the fuller the reproduced sound will be, the less low and high frequencies will be lost due to insufficient acoustic capabilities. On the other hand, do not forget that the actual sound quality also depends on a number of other parameters — primarily the frequency response. In addition, human audible frequencies range from 16 Hz to 22 kHz; deviations from these values are very small, and the upper limit also decreases with age. Therefore, from a practical point of view, it does not make sense to provide too large a frequency range; and impressive performances like 10 – 50000 Hz, found in top-class models, are usually more of a kind of "side effect" of high-quality speakers (and at the same time — a marketing ploy) than a really significant moment.

— Airplay. AirPlay technology was developed by Apple. It is based on Wi-Fi and is used to wirelessly broadcast content from Apple devices to external audio systems. Thus, this function is useful for those who want to connect an iPhone or iPod touch to the audio system, but do not want to fiddle with wires; however, it is possible to connect via AirPlay and other devices - for example, a PC with iTunes and a Wi-Fi module installed.

— Airplay 2. The second generation of the AirPlay technology described above, introduced in 2018. Among the main innovations of this version is support for the "multi-room" format, that is, the simultaneous transmission of several audio signals to different compatible devices installed in different places. In this way, you can, for example, turn on the radio broadcast of a news programme in the living room, relaxing music in the bedroom, etc. In addition, AirPlay 2 received a number of other improvements - improved buffering, the ability to stream to stereo speakers, as well as support for voice control through Siri.

— Chromecast. The original name is Google Cast. A technology for broadcasting content to external devices developed by Google. Allows you to transmit an audio signal from a PC or mobile device to the audio system, broadcasting is standardly carried out via Wi-Fi, while the receiver and signal source must be in the sa...me Wi-Fi network (Chromecast media players are an exception). Note that in signal sources (smartphones, tablets, PCs, etc.), Chromecast is implemented at the level of individual applications. For example, at the time of its creation, this feature was available, among others, in the YouTube and Netflix apps for Android and iOS, as well as in the web versions of these apps for Chrome. Thanks to this format, this technology is extremely widespread in our time, and the ability to connect a particular gadget to an audio system with a Chromecast is usually limited to the ability to install appropriate applications on this gadget.

— DLNA. DLNA (Digital Living Network Alliance) is a standard that allows you to combine various types of home electronics and home appliances into a single network for content sharing and management. In the case of audio systems, DLNA can be used, for example, to play music from a computer disk connected to such a network, broadcast sound to a device installed in another room (for example, an amplifier), etc. Connection to DLNA can be carried out both wired and wirelessly (according to the Wi-Fi standard), and the compatibility of devices does not depend on their manufacturers - the only condition is compliance with the DLNA standard.

-LAN. Standard interface for wired communication to local computer networks based on RJ-45 connector. Its presence allows you to use various network features such as Internet radio (see "Advanced") or DLNA (see above). Compared to another network interface - Wi-Fi - LAN is less convenient due to the presence of wires, but it is more reliable and provides a higher actual data transfer rate.

- WiFi. The presence of a Wi-Fi wireless module in the design of the audio system. This technology is used both in computer networks and for direct communication of various devices with each other; its "range" is enough to work within residential premises, even through walls. In this case, Wi-Fi can be used to work with network features such as Internet radio or DLNA(see above). At the same time, this option is more convenient than wired LAN, due to the absence of actual wires. In addition, support for this technology is a prerequisite for using the AirPlay and Chromecast features (see above); and in some devices, Wi-Fi even allows you to connect smartphones, tablets and other gadgets as remote controls.

One of the most modern and fastest standards of this wireless communication technology is Wi-Fi 5. The 802.11ac version uses the 5 GHz band (less crowded and more less noise-resistant than 2.4 GHz), providing speeds of up to 1.69 Gbps per antenna and up to 6.77 Gbps with multiple antennas.

— Bluetooth. Direct wireless communication technology between different devices. One of the most popular ways to use Bluetooth in audio systems is to work with an audio signal, primarily broadcasting sound to wireless headphones or speakers; and some models also provide the ability to connect a smartphone, tablet or other device and use the audio system as an external Bluetooth speaker. True, it should be borne in mind that initially Bluetooth is noticeably inferior to a wired communication in terms of sound quality; however, in our time, this shortcoming is often compensated by the use of one or another version of the aptX codec(see below).
In addition, other options for using Bluetooth may be provided - for example, file sharing between the built-in memory and the same smartphone, or remote control via an application. They are not mandatory for modern audio systems, but with the development of technology they are becoming more common.

In modern audio systems, the Bluetooth v 5 standard is most often used. Its important innovation is the expansion of the capabilities of the BLE (“Bluetooth Low Energy”) mode: if necessary, the device can increase the range by reducing the speed, or speed up transmission at the cost of reducing the range. In addition, a number of improvements have been introduced regarding the simultaneous operation of several connected devices.

- Support for aptX. Support for audio system aptX - a codec designed to improve the quality of sound transmitted via Bluetooth. Accordingly, this function automatically means the presence of a built-in Bluetooth module (see above). The need to use special technologies is due to the fact that in the original Bluetooth format compresses the audio signal very strongly, which significantly affects the final sound quality. aptX technology is designed to remedy the situation: according to the creators, it provides sound purity, "comparable to Audio CD (16-bit / 44.1kHz)" and almost as good as a wired communication. This is often enough even for comfortable listening to lossless formats, not to mention MP3 and other popular compressed formats. Of course, in order to use aptX, the signal source must also support it.

- Support for aptX HD. Support for the aptX HD codec by the audio system, an improved and updated version of the aptX described above. This version claims sound clarity comparable to Hi-Res (24-bit/48kHz) audio material; this allows you to comfortably listen not only to MP3, but also to lossless formats and even uncompressed audio materials. On the other hand, aptX HD support is quite expensive, and its advantages over the original aptX become noticeable only on very high-quality audio materials, for which consumer audio systems are rarely used. Therefore, this function has not received much distribution.

— AAC. A codec used primarily in Apple portable devices to improve sound transmitted via Bluetooth. In this sense, it is similar to aptX (see the corresponding paragraphs), but is noticeably inferior to it in terms of capabilities: if the sound of aptX is compared with Audio CD, then AAC is at the level of an average quality MP3 file. However, for listening to the same MP3s, this is quite enough; the difference becomes noticeable only on more advanced formats.

— LDAC. Sony's proprietary Bluetooth codec. It surpasses even aptX HD in terms of bandwidth and potential sound quality, providing performance at the Hi-Res level of 24-bit/96kHz audio; there is even an opinion that this is the maximum quality that it makes sense to provide in wireless headphones - further improvement will simply be imperceptible to the human ear.

- Network audio streaming. The ability of the audio system to work with network streaming (streaming) audio services like Deezer, Spotify, Tidal, etc. Such services are designed to broadcast content (in this case, mostly music) over the Internet; in this case, the files being played are not stored in the audio system, but are played directly from the corresponding resource on the World Wide Web. Nowadays, there are many streaming services that differ in the range of music and access conditions; a specific list of supported services should be specified separately. However, in any case, the main advantages of online streaming can be called an extensive selection of content and almost instant access to the desired composition; some services can also act as a radio, automatically selecting music according to the manufacturer's preferences.

- Speakerphone. Ability to use the device as a hands-free system for a mobile phone. In this mode, the audio system is connected to the device, most often via Bluetooth (see above), and the voice of the subscriber at the other end of the line is output not to the phone, but to the speakers of the audio system. This is often more comfortable than holding the phone to your ear; in addition, the speakerphone is useful if several people need to participate in a conversation.

- NFC chip. NFC is a short-range wireless technology (about 10 cm). In audio systems, NFC is mainly used to facilitate communication using the Wi-Fi or Bluetooth standard (see above). With this chip, you can simply bring an external NFC-compatible device to the audio system and confirm the communication - it's easier than manually configuring settings.

- Docking station for Android. The presence of a docking station for connecting portable electronics (primarily smartphones) based on the Android operating system. In fact, the dock is a socket-stand, supplemented with a special plug; thanks to this, it not only provides a communication, but also allows you to install an external device directly on the audio system, which is quite convenient. We also note that such a communication often provides additional features - for example, controlling the player on a smartphone from the audio system remote control. However, when choosing a model with this function, it should be borne in mind that Android devices are very numerous and diverse; in practice, this means that before buying it makes sense to make sure that your gadget is compatible with the audio system.

Type of docking station for connecting Apple gadgets to the audio system – primarily iPhone smartphones and iPad tablets.

The dock itself is a special socket with a connector in which you can install a mobile phone (or other gadget), thus connecting it to the sound system. This is often easier and more convenient than using a cable, and it also allows to use various additional features – for example, control the player on your smartphone through the remote control of the audio system.

As for the type of docking station, in this case it is indicated by the type of connector used for connection. It is worth noting here that since 2012, only the 8-pin (Lightning) interface has been installed in Apple portable gadgets, and docks are made for it in all modern audio systems. The earlier 30-pin connector is found only in older models; there are also devices that support both interfaces at once.

A remote control is included with the audio system. The convenience of this function is obvious: instead of having to approach the device every time to change the operating parameters, you can give a command from the remote control without getting up.

Type of independent power sourceused in the audio system. Such power is usually not the only option — it only complements the ability to work from the network.

— AA batteries. Replaceable elements of a standard size, colloquially known as "finger". Available in a variety of options, varying in quality and price, available not only as disposable batteries, but also as rechargeable batteries; sold almost everywhere. The main advantage of all replaceable cells is the ability to quickly change dead batteries for fresh ones (of course, if there is a reserve), while the original battery has to be charged — and this takes time and an external power source. As for AA, they have a relatively low power and capacity. These characteristics are sufficient for relatively compact devices; however, for models that need to power mechanical drives (for example, for CDs) and/or provide high sound power, “AA” batteries are poorly suited, and therefore are rarely used in them.

— AAA batteries. Replaceable elements, known as "mini-finger" or "little fingers". In general, they are similar to the AAs described above and differ from them only in small sizes and, as a result, less power. Because of this, such power is used only in the most compact models of audio systems, which do not require high power, but small sizes are crucial.

— Batteries C. Replaceable cells known as "Baby". The features of replaceable cells are generally desc...ribed in AA Batteries above; here we note that C batteries have a cylindrical shape and are similar in length to “finger-type” batteries, but are much thicker, due to which they are distinguished by higher power and can be used in rather “gluttonous” systems.

— D batteries. Replacement cells, the largest variety of standard cylindrical batteries used in modern audio systems. Used in the most powerful models that require a large amount of energy.

— Batteries. This parameter is indicated in our catalog in two cases: if the device uses standard replaceable elements that do not belong to any of the standard sizes described above, or if the battery size is not indicated in the manufacturer's official data.

— Accumulator. Powered by its own original battery, which is not related to standard sizes, and in some models is also non-removable. On the one hand, this option eliminates the need to constantly buy replacement batteries (or significantly spend money once on rechargeable batteries), moreover, the battery is usually supplied as a kit. However, when the charge is exhausted, in most cases the only option is to charge from an external power source — and this requires not only the presence of such a source, but also a fairly large amount of time.

Audio system operating time without connection to an external power source (network or USB port, depending on the capabilities). Note that manufacturers tend to indicate battery life in their specifications under optimal conditions for energy saving: at low volume, without using additional functions, etc. Therefore, in fact, this indicator may be noticeably lower than the claimed one, and speakers with a long operating time will not sound at full volume for the specified hours.