USA
Catalog   /   Home & Renovation   /   Furniture   /   Inflatable Furniture

Comparison Intex 64448 vs Intex 64464

Add to comparison
Intex 64448
Intex 64464
Intex 64448Intex 64464
Outdated Product
from $73.57 up to $91.80
Outdated Product
TOP sellers
Product typebedbed
Number of seats22
Specs
Maximum load273 kg273 kg
Stiffening ribtransverse
Pumpelectric built-in pumpelectric built-in pump
Flocked coating (velor)
Size (unfolded)236x152xx86 cm203х152х51 cm
Weight16.5 kg
Color
Added to E-Catalogjuly 2019april 2016

Stiffening rib

The type of stiffeners provided in the design of the bed (this item is relevant for this type of inflatable furniture).

Stiffeners externally look like a special set of protrusions and depressions on the surface of the product, however, the matter may not be limited to external details (see below). Anyway, such structural elements increase the resistance of the surface to bending and, accordingly, increase strength and reliability. In modern inflatable furniture, you can find the following types of similar parts:

— Longitudinal. Stiffening elements in the form of a set of protrusions and grooves directed along the product; the ridges and grooves can be zigzagged for transverse efficiency, but even such elements resist mainly lateral deformation. Anyway, this is the simplest and most inexpensive form of stiffeners. As for practical properties, such a design works well at small and medium loads, but at high loads it is inferior to the transverse one (see below) both in terms of efficiency and durability. In addition, for some users, the longitudinal elements are inconvenient purely for subjective feelings.

— Transverse. Stiffeners of this type may look different. The most obvious, traditional option is a set of protrusions and grooves directed across the recumbent place; in other words, it is an analogue of the longitudinal ribs described above, differing only in direction. This provides, above all, resistance to transverse deformations, whic...h is especially useful for double products used by people who differ significantly in weight. Another, more advanced type of transverse ribs is a set of special recesses located in the correct order on the surface of the product. Under these recesses, partitions are hidden that connect the upper and lower sides of the inflatable shell. Such a design is quite expensive, but it has a number of advantages: in particular, it works effectively not only in the transverse, but also in the longitudinal direction, and also optimally distributes the load on the body of a lying person, providing maximum comfort.

Size (unfolded)

The overall dimensions of the product in the working position — fully inflated, and for folding models (see "Type") — also unfolded.

In general, this is a fairly obvious parameter; we only note that the size of the space available for sitting or lying down may be somewhat less than the overall length or width of the product — due to the presence of a backrest and/or armrests. These elements usually account for about 20 – 25 cm of space.

Weight

The total weight of the product.

The ease of transportation depends primarily on the weight. However in the case of inflatable furniture, this point is not critical: most of these products are still designed for constant use in one place. However, sometimes a piece of furniture is also bought with the expectation of being able to quickly move from place to place — for example, from home to the country house and back. In such cases, it is worth considering that light weight makes it easier to carry, but for the same performance, lighter products usually have either less reliability (due to the thin shell) or more cost than heavier ones.
Intex 64448 often compared
Intex 64464 often compared