USA
Catalog   /   Home & Renovation   /   Furniture   /   Inflatable Furniture

Comparison Bestway 75053 vs Intex 68564

Add to comparison
Bestway 75053
Intex 68564
Bestway 75053Intex 68564
from $25.00
Outdated Product
from $168.08 
Expecting restock
TOP sellers
Product typerockerrocker
Number of seats11
Specs
Maximum load105 kg
Pumpwithout pumpwithout pump
Headrest
Pouf icluded
 /54x54x26/
Flocked coating (velor)
Cup holder
Size (unfolded)122x94x81 cm
127х102х76 cm /armchair, 64x28 - ottoman/
Weight2.15 kg3.5 kg
Color
Added to E-Catalogapril 2017august 2014

Maximum load

The maximum load allowed for a piece of furniture; in other words, the maximum allowable total weight of people using the product.

It is definitely not recommended to exceed this parameter — even if the shell does not burst immediately, it will be subjected to abnormal loads, and an “accident” can occur at any time. And ideally, you should have a weight margin of at least a couple of tens of kilograms — this will give an additional guarantee in case of unforeseen situations. With regard to specific values, a permissible load of up to 100 kg is found exclusively in single furniture; values of 100 – 200 kg are also typical mainly for products for 1 person, although double solutions are already found here (the actual minimum for them is about 175 kg); and the most durable and “hardy” models, which can withstand more than 200 kg, are already mainly double.

Headrest

The presence of a headrest in the product is a device for supporting the head.

This feature is found mainly among beds (see "Type"). In such furniture, the headrest is a small protrusion from the side of the head of a lying person (people). This ledge performs several functions at once: it increases the height of the pillow, reduces the likelihood of it falling over the edge of the bed, and in extreme cases it can even replace the pillow. At the same time, note that in some cases the headrest may be redundant — for example, if the existing pillows are already of considerable thickness. So most air beds do not have such equipment.

Cup holder

The presence of a cup holder in the design of furniture. Most often, it is a characteristic cylindrical recess in the armrest, in which you can install not only a glass, but also other objects: a bottle, a bag of snacks, and even a mobile phone or a TV remote control. Typically, a similar function is provided in models designed for a sitting position — armchairs and sofas (see "Type").

Size (unfolded)

The overall dimensions of the product in the working position — fully inflated, and for folding models (see "Type") — also unfolded.

In general, this is a fairly obvious parameter; we only note that the size of the space available for sitting or lying down may be somewhat less than the overall length or width of the product — due to the presence of a backrest and/or armrests. These elements usually account for about 20 – 25 cm of space.

Weight

The total weight of the product.

The ease of transportation depends primarily on the weight. However in the case of inflatable furniture, this point is not critical: most of these products are still designed for constant use in one place. However, sometimes a piece of furniture is also bought with the expectation of being able to quickly move from place to place — for example, from home to the country house and back. In such cases, it is worth considering that light weight makes it easier to carry, but for the same performance, lighter products usually have either less reliability (due to the thin shell) or more cost than heavier ones.
Intex 68564 often compared