Comparison AMF Atletik vs Nowy Styl Atlant

The highest weight that the chair is guaranteed to withstand with regular use — in other words, the maximum weight of a seated person, allowing you to constantly use the product in normal mode without fear of unexpected breakdown. Note that many models are able to endure short-term excess weight without problems, however, anyway, it is not worth overloading the structure (and even more so doing it all the time): off-design loads will significantly increase its wear, and breakdown can occur at the most unexpected moment.

Chair back height; for models with a variable back height (see "Adjustments"), as a rule, the maximum value is indicated.

The back height is measured from the seat to the top edge. In essence, this is the height of support available to the back. In some situations, you can not pay much attention to this indicator - for example, if the chair is intended for visitors and the role of the back in it is purely symbolic. However, if you have to sit in a chair often and for a long time, this point should also be taken into account. Ideally, it's best to try a few chairs "live" and find out which backrest height is most comfortable for you. If this is not possible, it is worth deciding which area on the body the back should reach (to the shoulder blades, to the base of the neck, etc.) and measure at what height from the seat this area is in a sitting position. And if you need specific support for the back of the head, you should choose among models equipped with head restraints (see above).

Dimensions of the seat installed in the chair in width and depth (from the back to the front edge). For models with variable depth (see "Adjustments"), the maximum value is taken into account when the seat is pushed forward to the stop.

Most modern chairs are designed for the average adult, so paying attention to size is primarily for people of a large, or, conversely, miniature physique. In width, the average is considered to be 45 – 55 cm, the narrowest models are up to 40 cm wide, in the widest it can exceed 60 cm. Similarly, a depth of less than 40 cm is considered small, up to 60 cm — medium, more than 60 cm — large.

Seat height from the floor. The optimal height for an average person is considered to be 40 – 50 cm, however, this is largely subjective, and the comfort of the chair for a specific user greatly depends on their preferences and physical characteristics. In light of this, many models offer the ability to adjust the height within a certain range (see "Adjustments"). For the best choice, it's best to "try out" in person to determine at what height you feel comfortable sitting and find a model with the corresponding features.

The presence of a headrest in the design of the chair.

The role of the headrest can be played as a stand, made separately from the backrest, and the upper part of the backrest — if it has a pronounced characteristic shape or a pillow is supplied in the kit, which can be installed at the request of the user. The simplest high backs that do not have a characteristic upper part are not considered head restraints.

Anyway, this feature provides additional comfort — especially when reclining back. On the other hand, if you have to sit mostly straight in the chair and the back plays a symbolic role, perhaps the best choice would be a model without a headrest(especially since such chairs are cheaper).

The height of the armrests installed in the chair relative to the seat. In models that have the ability to adjust the armrests in height (see "Adjustments"), the range of such adjustment is usually indicated.

The overall comfort of using the chair depends on the height of the armrests, but this parameter is largely subjective: even people of the same height can differ in physique and personal preferences. So if comfort is of fundamental importance to you, it is best to check live what armrest height is optimal and choose a chair with the appropriate specifications.

The material from which the seat of the chair is made. Note that certain models may be available in several options, differing by seat material.

— Fabric. Fabric can have many varieties, and specific characteristics depend on the chair's price category. This material is found in all categories — from budget models to quite expensive ones. Common properties of all fabric types are low cost, durability, and low maintenance requirements.

— Leather. The main distinguishing features of natural leather are its luxurious appearance and corresponding cost. In light of this, this material is considered "image-based" and is used not only for comfort but also to emphasize the owner's status. Accordingly, most chairs with leather seats are intended for executives (see "Purpose") and belong to the premium class. Practically, leather is durable and quite pleasant to the touch, but does not breathe well (which can cause discomfort in hot weather).

— Leatherette. A variety of synthetic materials imitating the natural leather described above. The quality and properties of a specific leatherette usually directly depend on its cost (and the chair's price category overall), but even the most expensive options usually cost less than leather — despite the fact that they can be virtually indistinguishable from it in appearance and feel. Additionally, this material is less demanding in terms of maint...enance. Thanks to this, leatherette seats are quite common. Their main disadvantages are the tendency to develop scuffs and generally a shorter lifespan than leather ones (again, much depends on the price).

— Plastic. Plastic seats are typical for the cheapest chairs, designed for visitors or staff who do not have to sit in one place for long. This material is characterized by low cost combined with durability, reliability, and a variety of colors. However, it has one key disadvantage that practically nullifies all the described benefits — hardness; simply put, sitting on plastic is uncomfortable. Because of this, even among the mentioned models, all-plastic seats are very rare.

— Wood. In the case of seats for office chairs, the word "wood" usually means plywood. This material is largely similar to the plastic described above, but it also has some differences: on one hand, it features an aesthetic appearance with original patterns and is considered more pleasant to the touch; on the other hand, it costs more and offers relatively few design options. Nevertheless, the disadvantage of hardness is also characteristic of this material, which is why it is also used only in isolated cases.

— Mesh. Seats in the form of a rigid frame with fabric or synthetic mesh stretched across it. The main advantages of such structures are their light weight and good breathability. The design of the mesh allows them to be used even in executive chairs. As for the noticeable disadvantages of mesh seats, they only have slightly lower reliability and greater repair complexity compared to similar fabric seats (see above).

The main material used for the chair backrest. Note that some models are available in several design options, differing in materials; all available options are listed for such models.

— Fabric. Relatively inexpensive and at the same time quite practical material. It has decent strength, is easy to maintain, and can be made in numerous colors and designs; in addition, it provides good ventilation, which can be useful in hot weather.

— Leather. Natural leather is expensive and strongly highlights the owner's status (especially since leather products themselves look solid and luxurious). Accordingly, the main use of this option is for executive chairs (see "Purpose"). From a practical perspective, leather is durable and quite pleasant to the touch, however, it has poor breathability (which can cause discomfort in hot weather) and requires specific care, otherwise, it may lose its "marketable appearance."

— Leatherette. There are many types of leatherette, significantly differing in price and properties, and the most advanced ones are even used in premium-class "executive" chairs. Leatherette backrests are not as demanding in care as natural leather, but they are less durable and more prone to wear and tear.

— Mesh. Backrests in the form of a rigid frame with a fabric or synthetic mesh stretched...over it. The main advantages of such designs are their lightweight and good breathability. The design of the meshes allows their use even in executive chairs. The noticeable drawbacks include slightly less reliability and greater repair complexity compared to similar fabric (see above).

— Plastic. Purely plastic backrests are most often used in chairs with seats made of the same material (see above). They are strong and inexpensive, but due to their hardness, they are quite uncomfortable, which is why they are not widespread even among visitor models.

— Wood. Wooden backrests are in many ways similar to the plastic ones described above, except that they are somewhat more expensive and can have an original appearance due to the wood's textured patterns. They are also rarely used due to their hardness and the associated discomfort.

The material from which the base of the chair is made (see "Base construction").

— Plastic. Plastic is notable for its low cost, combined with ease of processing — it can be easily given even a rather complex shape. This material is considered less durable than metal, but modern plastics are able to provide sufficient strength even for chairs designed for high loads (see "Maximum user weight"). However this is true only for bases of the "cross" type; for the legs and skids, the plastic is still not strong enough. However, it is found in models of all price categories.

— Metal. The main advantage of the metal is its high strength, due to which it can be used for all types of bases. At the same time, it is somewhat more expensive than plastic, and therefore, among armchairs with a cross, it is found mainly in models of the middle and higher levels.

— Tree. Wood can be attributed to design materials: it is used not so much for practical reasons as to provide the chair with a stylish and aesthetic appearance. At the same time, it is considered more reliable than plastic (although not as reliable as metal), so it can even be used for skids. However chairs with wooden bases are quite expensive.