USA
Catalog   /   Automotive   /   Tyres & Rims   /   Car Pumps & Compressors

Comparison Voin VL-550 vs Vitol KA-U12050

Add to comparison
Voin VL-550
Vitol KA-U12050
Voin VL-550Vitol KA-U12050
from $34.20
Outdated Product
from $21.56 up to $26.24
Outdated Product
TOP sellers
Typecompressorcompressor
Power source
12 V
12 V
Specs
Pressure gaugeanalogueanalogue
Max. pressure10 Atm10 Atm
Performance40 L/min35 L/min
Current consumption15 А14 А
Power150 W150 W
Connectioncigarette lightercigarette lighter
Power cord length5 m2.7 m
Hose length0.75 m1.2 m
General
Lamp
Cover/case
Size245x125x200 mm235x140x170 mm
Weight2.6 kg2.6 kg
Added to E-Catalogmay 2015may 2015

Performance

The capacity of the compressor (see "Type") is the maximum amount of air that it can pump into the tyre in a minute.

Higher performance reduces the time required to inflate the wheel; on the other hand, this parameter directly affects the dimensions, weight, power consumption and price of the compressor. So it is worth choosing according to performance, taking into account real needs. So, for a “duty” tyre inflation in a passenger car, a compressor with a low operating speed is quite enough — up to 20 L / min inclusive. And if the speed of full pumping is also important for you (for example, after replacing the rubber) — you can choose a unit for 21 – 40 L / min. In turn, models with more solid characteristics — 41 – 60 L / min and more — are intended mainly for heavy equipment like SUVs, trucks, tractors, etc.

Separately, it should be noted that this parameter is NOT suitable for calculating the exact inflation time (even if the exact volume of air in the wheel is known). The fact is that the actual performance of the compressor is always lower than the claimed one: the figures in the characteristics are indicated for free air outlet, and when pumping the wheels, the pumping speed will inevitably be lower due to the resistance of the nipple.

Current consumption

The amount of current drawn by the compressor during operation. For most models intended for use with passenger cars, this indicator is at the level of 12-14 A. A small current consumption is preferable from the point of view of energy saving, but the performance of the device largely depends on this indicator (see "Performance").

Power cord length

The length of the cord with which the compressor is connected to a power source — a standard car socket DC 12V (so-called cigarette lighter) or directly to the battery terminals. It is believed that the length of the cable should not be less than two metres to avoid inconvenience in operation.

Hose length

The length of the hose through which air is pumped into the tyre. The larger it is, the more convenient the device is to use. But it is rare that the compressor is left far from the wheel, especially if a pressure gauge is placed on the device, which must be periodically checked. For domestic use in cars, a one and a half metre long hose is enough. Powerful and performant models can be equipped with a hose of 7 metres or more, but these are more solutions for commercial use in car services.

Lamp

The model is additionally equipped with a flashlight to illuminate the work area in the dark. A very useful feature, especially for small, portable compressors for cars — can help out if you need to pump up the wheel at night in the middle of the road. Depending on the modification, the lamp can support various modes of operation — constant light, flashing mode, SOS signal (see the description of each individual compressor model). The design may also differ — the flashlight can be built-in or removable.
Voin VL-550 often compared
Vitol KA-U12050 often compared