USA
Catalog   /   Large Appliances   /   Integrated Appliances   /   Integrated Dishwashers

Comparison Electrolux ESL 94321 LA vs Electrolux ESL 94320 LA

Add to comparison
Electrolux ESL 94321 LA
Electrolux ESL 94320 LA
Electrolux ESL 94321 LAElectrolux ESL 94320 LA
Outdated ProductOutdated Product
TOP sellers
Type of instalationfully integratedfully integrated
Number of place settings99
Water consumption10 L
Dryer typecondensercondenser
Auto door opening
 /AirDry/
 /AirDry/
Inverter motor
Energy classA+
A+ /222 kW/year/
Noise level49 dB49 dB
Washing functions
Number of programmes55
Washing modes
pre-rinse
quick wash
automatic
eco
intensive
pre-rinse
quick wash /60 °C/
automatic /45-70 °C/
eco /50 °C/
intensive /70 °C/
3-in-1 tablets use
More features
Delayed start timer
 /up to 6 hours/
 /up to 6 hours/
End-of-cycle signal
Salt indicator
Rinse aid indicator
Leak protection
Hot water supply
More specs
Controlspush-buttonspush-buttons
Dimensions (HxWxD)82x45x55 cm82x45x55 cm
Cut-out height820 mm820 mm
Cut-out width450 mm450 mm
Cut-out depth550 mm550 mm
Country of originPolandPoland
Added to E-Catalognovember 2017september 2017

Water consumption

The amount of water used by the dishwasher in one washing cycle. Usually, it is indicated for a standard cycle — at full load, without pre-rinsing, etc. Accordingly, in special modes, the consumption may differ from the indicated one.

The lower the consumption — it better; this is especially true for those who consume water by metres or who have a limited supply of water (for example, it is drawn from a well with a low productivity). On the other hand, a reduction in consumption can have a negative effect on the quality of the wash. So, choosing an economical dishwasher, you should pay attention to the washing class (see below). In addition, only models of the same capacity can be compared in terms of consumption — after all, the more dishes, the more water is required to wash them.

Inverter motor

The presence of an inverter motor in the design of the dishwasher.

Inverter motors are brushless and have higher efficiency, lower noise levels, and improved safety due to the absence of brushes. However, they are more expensive compared to conventional motors.

Hot water supply

Possibility of connection of the dishwasher to a source of hot water. With this connection, the water enters the device already heated (unlike the usual procedure, when the dishwasher itself heats the water to the desired temperature) — thus it saves time and energy. However, note that "hot connection" is demanding on the quality of water: in most cases, it must have a temperature of 60-65 °C and be supplied without pressure drops.
Note that hot water connection is an option, not the only way; dishwashers with the possibility of such a connection can usually work according to the standard scheme, from a source of cold water.
Electrolux ESL 94321 LA often compared
Electrolux ESL 94320 LA often compared