USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Bathroom & Shower   /   Heated Towel Rails

Comparison LARIS Euromix E L 630x900 vs Navin Omega E R 530x800

Add to comparison
LARIS Euromix E (L 630x900)
Navin Omega E (R 530x800)
LARIS Euromix E L 630x900Navin Omega E R 530x800
from $115.32 up to $124.01
Outdated Product
from $36.12
Outdated Product
TOP sellers
Typeelectricelectric
Designthree-dimensional ladderthree-dimensional ladder
Specs
Power consumption198 W102 W
Max. operating t55 °C60 °C
Thermostat
Controlmechanicalmechanical
Power cableleftright
Number of jumpers108
Jumper cascade
Material
steel /stainless AISI304/
steel
Coating
chrome
bronze
gold
 
chrome
 
 
white
Country of originUkraineUkraine
Dimensions (WxHxD)630x912x202 mm532x800x195 mm
Weight4.6 kg
Color
Added to E-Catalogmay 2016march 2015

Power consumption

The maximum power consumed when operating an electric towel rail (or combined model when operating from an electrical grid; see «Type»). As a rule, this value corresponds to the operating thermal capacity of the electric heater, so that it is possible to estimate the overall efficiency of such devices from the power consumption. In addition, energy consumption and network load depend on this indicator.

As a rule, manufacturers select the power consumption depending on the size of the towel bar - to ensure it is sufficient for heating and effective drying. This requires relatively little energy. But in the role of a heater for the bathroom is more convenient to use water heaters - they are easier to achieve high power (and such heating is cheaper). Therefore, electric heaters in modern models have low power - the devices more than 150 W are rare, and the most low-power devices do not reach and 50 W.

Max. operating t

The highest operating temperature of the towel bar. The features of this parameter depend on the type of device (see above). For water models, the maximum water temperature (or other coolant) is specified here, at which the device can be guaranteed to operate indefinitely for a long time without risk of damage. Usually this value is not less than 95 °C, and in some models may exceed the boiling point of the water and reach 105...110 C. This is usually more than enough for rooms with central heating and hot water supply, but if the heating is provided autonomously, It is necessary to specify separately the range of operating temperatures in the contours and make sure that the selected towel rail will fit them.

In the case of an electrical model, maximum operating temperature means the highest temperature to which the device can heat up. Usually, when it is achieved, the heating is automatically switched off and turned on only when the temperature is significantly lower. In this case, the usual values are 60...70°C, which is comparable to the standard water temperature in the district hot water supply systems - this temperature ensures efficient drying and at the same time does not create a risk of being burned by accidental touch.

Power cable

The location of the cable on the towel rail housing allows you to choose the right model, so as not to invent with the connection of the device to the socket.

— Left. The electrical wire is placed on left side of the body, which allows a neat and concise installation of the towel rail on the wall, on the right side of the plug.

— Right. The power cable is removed via right side of the housing. This wiring arrangement is advisable to choose when the towel rail will be mounted to the left of the outlet.

— Hidden. Hidden cable liner involves connecting to the power grid behind the false wall or by means of electrical communications hidden in the wall. In this case, the heater terminal box itself is most often placed closer to the center of the housing. As a rule, the towel rail with the option of a hidden connection has a short wire without a plug at the end. But there are models that are not normally equipped with a connecting wiring - in this case, it is necessary to connect the end of the cable hidden in the wall to the terminal box heater. Also on the market there are models that support both connection options: both hidden and classic (using a conventional power plug), which allows the user to determine which option will be the best for him.

Number of jumpers

Number of jumpers - horizontal elements - provided in the design of the towel rail. It is on them are placed towels and other things designed to dry; however, there are models in which not every jumper is suitable for this. The fact is that horizontal elements can be placed in groups, inside which the distance between them is so small that it is very difficult, if not impossible, to place a towel there. In such groups, only the upper bridge supports, and the rest play the role of additional heating elements, increasing the heating area and, accordingly, the efficiency of drying the fabric. This feature is quite common in models with more than 10 jumpers.

It can be said that, in theory, the more jumpers - the more things can be hung on the towel rail; however, in practice, this moment largely depends on the design of a particular model, And the more horizontal elements there are, the more likely they are to be grouped. Also, it is worth paying attention to the width of the towel rail, according to this criterion you can conventionally divide them into broad and narrow.