USA
Catalog   /   Tools & Gardening   /   Machines & Equipment   /   Bench Grinders & Polishers

Comparison Vityas MZU-1000 49.5 mm / 1000 W
230 V
vs Sturm BG6010SF 49.3 mm / 100 W
230 V

Add to comparison
Vityas MZU-1000 49.5 mm / 1000 W 230 V
Vityas MZU-1000 49.5 mm / 1000 W
230 V
Sturm BG6010SF 49.3 mm / 100 W
230 V
Outdated Product
from $41.72 up to $43.47
Outdated Product
TOP sellers
Machinebench grinderbench grinder
Specs
Rotation modules11
Work partdiskdisk
Voltage230 V230 V
Motor power1000 W100 W
Drill diameter3 – 10 mm3 – 10 mm
Sharpening
drill
blades
universal
drill
blades
universal
Dry processing
Disc diameter49.5 mm49.3 mm
Bore diameter10 mm10.2 mm
Disc thickness7.5 mm7.5 mm
Disc speed6700 rpm6700 rpm
General
Flexible shaft (engraver)
Weight1.3 kg
Added to E-Catalogfebruary 2020february 2017

Motor power

Rated power of the electric motor of the machine. The more powerful the engine, the higher the speed and intensity of processing can be, the larger discs can be used with the machine and the better it is suitable for working with hard, stubborn materials. On the other hand, a powerful motor consumes a lot of energy (which may require special connection — see "Power") and significantly affects the dimensions, weight and price of the entire unit. Therefore, manufacturers choose this parameter based on the type (see "Machine") and the desired characteristics of speed, productivity, etc. In fact, this means that engine power is rather a secondary parameter, and when choosing, it makes sense to pay attention to more practical points — disk diameter, rotation / movement speed, etc.

Disc diameter

Regular diameter of the disk (see "Working element") used by the machine for dry processing (see above). When grinding and polishing, usually, we are talking about the maximum diameter of the disk that can be installed on the tool — a larger nozzle will either be ineffective or not fit into the dimensions of the seat at all, but a smaller diameter disk, usually, is installed without problems (of course, if the hole diameter matches — see below). For grinding machines, the diameter of the disc corresponds to the diameter of the sanding pad, which is necessary for the full use of the disc.

The larger the regular disk — the heavier and more powerful the machine, usually, the better it can cope with complex work of a large volume. At the same time, for small everyday tasks like periodically sharpening knives or chisels, a small disc is quite enough.

Bore diameter

The bore diameter of the dry cutting discs (see above) used by the machine. In order for the nozzle to be used normally with the machine, it must match it not only in diameter and thickness (see the relevant paragraphs), but also in the size of the mounting hole.
Vityas MZU-1000 often compared