Comparison Samurai IPSMF-46TP vs Fiskars 112290

This tool in most cases is manual and mechanical, requiring physical impact. However, at the turn of 2021 and 2022, battery versions began to appear, simplifying work. Most of the tools below can be either mechanical or cordless. More details about them:

- Secateurs. A fairly simple and easy-to-use garden tool designed for cutting branches, small shoots on the crowns of trees, shrubs, harvesting grapes and solving other similar problems. Outwardly similar to scissors and can be used either with two hands or with one, depending on the design. Secateurs can have different lengths of handles and blades, as well as the configuration of the working part. The classic model consists of two blades - a support blade and a working blade. The first serves to securely fix the branch or shoot during work, as well as to prevent the branch from jumping to the side after cutting. To cut large branches with a size of 3-4 cm, the pruning shears are reinforced with long handles and a ratchet mechanism.

- Scissors. Garden shears already have two blades in the working area and are used for trimming thin branches, stems, grass, etc. They are characterized by straight blades and an extremely simple design. They may vary in the shape of the blades, the type of cutting edge, as well as the length and size of the handle. For example, scissors with a serrated or wavy edge are go...od because the branches and shoots being cut do not slide along the blade; these are often used for trimming climbing plants. And if you need to deal with particularly thick and durable shoots, then garden shears with a serrated blade are suitable for this task.

— Lopper. Garden tool for cutting branches and knots. As with pruning shears, the working area has a sharpened blade and a stop. But at the same time, the product is distinguished by long handles (usually from 30 cm to 90 cm) and allows you to work with vegetation located on the lower branches of the tree. The handles form a lever, so it is important to hold them with both hands. The tool is convenient for processing trees with a dense crown, cutting branches of thorny bushes, etc.

- Height cutter. A special type of garden tool, mainly intended for processing tree crowns or trimming fruit branches without the use of a ladder or stepladder. The product is distinguished by elongated telescopic handles - from 1 to 4 m, thanks to which the customer can work while standing on the ground. A special mechanism is built into the handle that allows you to control the decisive tool. Often, pole saws are equipped with saw blades.

— Vaccination. A tool for making special cuts necessary for scion and rootstock in the process of grafting trees. It is characterized by the presence of a figured knife, with which sLR cuts are made. Different types of grafting pruners can be equipped with blades of different configurations, and in universal models one working blade can easily be replaced by another. Different blade shapes are necessary to graft different types of trees. The advantages include the fact that with the help of this tool the process of grafting shoots is greatly simplified and accelerated. On the other hand, grafting pruners are only effective if the shoots are approximately the same size, otherwise you will have to use a knife.

— One-handed. Tools designed to be held in one hand while working. Thus, the second hand remains free, which is important in some situations — for example, when working at height, when you need to hold on to something just in case. Another advantage is portability: the tool is light and compact, many models can be easily carried in your pocket. The main drawback of the one-handed design is the relatively small force on the blades and, accordingly, the low efficiency when working with thick branches. Because of this, models with a maximum cutting diameter of more than 25 mm are extremely rare among such tools. The same applies to high cutters — for them, a two-handed layout is technically more convenient.

— Two-handed. Models designed to be held with two hands during operation. Usually, these are rather large instruments with long handles; the latter allows you to achieve high force on the blades and even cope with fairly thick branches without problems. The specific thickness limitation may, of course, vary; however, for example, all loppers are by definition two-handed. The disadvantages of this design are considered primarily bulky and rather significant weight, but they are offset by high efficiency. But a more critical point may be that during operation both hands of the user are busy: this, in particular, makes it difficult to work in an unstable position, especially at height.

The largest diameter (thickness) of a branch that the tool can handle.

The larger the maximum cut diameter, the more powerful this model, the lower the likelihood that a certain branch will be too tough for the tool. At the same time, note that to ensure high power, long handles and strong blades are needed, which accordingly affects the dimensions, weight and price. Therefore, it is worth choosing according to this parameter with a certain margin, but at the same time, this margin should not be too large.

As for specific figures, a maximum diameter of 20 mm or less is considered relatively small, but it often turns out to be quite enough for simple work. 21 – 30 mm — the average value, 31 – 40 mm — above average, and in loppers the maximum thickness can exceed 40 mm.

The ability to block the blades while the tool is not in use. Blade locking can be carried out in different ways, but the principle of its operation in all cases is the same: a special mechanism holds the blades in place, preventing them from opening and preventing unwanted contact of the cutting edges with surrounding objects. This provides additional security during storage and transportation.

The tool has a special spring that opens the blades. Thus, the user only has to apply force to close the blades during the cutting process; to open them, it is enough to relax the hand, allowing the return spring to perform its function. This noticeably speeds up and simplifies the work, especially when you have to make many small and frequent movements — for example, when cutting numerous small shoots. At the same time, the power of the spring is low, and its resistance when closing the blades is almost imperceptible against the background of the overall cutting force. And so that the blades and handles of the tool do not diverge during storage and transportation under the action of a spring, a special lock is provided in the design.