Comparison Oclean Z1 vs Oclean X

The number of working nozzles that are standardly supplied with the device. Nowadays, options are quite common with both one and two or three nozzles in the kit; and in the most extensive sets, this number can be four or five or even more.

In many sets, several nozzles may have different purposes. For instance, an irrigator, in addition to its standard nozzle, might include orthodontic and periodontal nozzles. However, it's important to note that models with the same number of accessories in the kit can have different specific specializations. So, when making a choice, it's wise to consider not just the quantity but also the types of nozzles available. Additionally, there's an option where several identical interchangeable heads come with one handle. This configuration is particularly common in toothbrushes. It enables multiple individuals, such as family members, to use a single device, and such a set is usually more cost-effective than purchasing individual toothbrushes for each person.

The number of brush modes provided by the device. The presence of several modes allows using the device for different procedures (for example, daily cleaning, delicate cleaning, whitening, etc.). Each such program has its own features of the working nozzle, as well as its own timer settings. The downside of such multifunctionality is the increased cost. In any case, this feature significantly expands the capabilities of the device; however, the specific set of modes may be different - it would not hurt to clarify it separately.

In this case, the mode means the general format of operation. For more information on the different formats, see "Modes" below. Note that this parameter should not be confused with the number of power settings. The latter is specified separately - see "Power modes", and in general, these characteristics are practically independent of each other. For example, a brush with one mode of operation can have several power settings. And vice versa, there may be only one power level, but several formats of operation.

Operating modes supported by the device.

Nowadays, toothbrushes offer the greatest variety of modes. In addition to traditional (so-called '2D') daily cleaning, they may include a 3D-mode, programs for sensitive and deep cleaning, polishing, whitening, gum massage, and tongue cleaning.

— Daily Cleaning (2D). The operating mode most similar to traditional (manual) toothbrushes. In this mode, the bristles move in a single plane; the trajectory can vary depending on the cleaning technology (see below). The intensity is usually medium/high, making this mode primarily for relatively healthy and not too sensitive teeth. The recommended time for daily cleaning is 2 minutes, 30 seconds for each quadrant of the mouth; relevant settings are typically provided in the timer (if available — see below). Generally, 2D cleaning is somewhat less effective than 3D (see below), but even the cheapest toothbrushes can offer this feature.

— Daily Cleaning (3D). A feature found in brushes with oscillating-rotating and sweeping technology. In these models, in addition to the primary cleaning technology, there is an up-and-down pulsation of bristles (more precisely, into the head and back). This allows cleaning in three planes, consid...erably improving efficiency compared to the 2D cleaning described above: the bristles not only process the outer tooth surface but also somewhat reach the sides and interdental spaces (although it is not a full replacement for using dental floss). The traditional downside of this feature is the relatively high cost.

— Sensitive Cleaning. A program for gentle treatment, mainly used for sensitive teeth and gums prone to bleeding. In brushes with oscillating-rotating and sweeping cleaning technology (see below), the sensitive mode usually involves reduced rotation/oscillation speed of the nozzle; in sonic and ultrasonic models, gentle treatment may be provided by decreasing the amplitude of oscillations. In any case, this mode minimizes discomfort during cleaning and the risk of gum damage — even with standard nozzles; for the most gentle effect, use this function with a sensitive teeth nozzle.

— Deep Cleaning. This name commonly refers to a cleaning with standard intensity, but extended duration — for instance, 3 minutes instead of the usual 2 minutes (45 seconds per quadrant of the mouth instead of the traditional 30 seconds). This mode allows for maximum effective tooth cleaning and removal of deposits insufficiently cleared by regular daily cleaning.

— Polishing. A mode for treating relatively clean teeth that do not require a full cleaning session. Usually, polishing is performed at a reduced frequency of oscillations (rotations) and takes significantly less time than regular treatment (e.g., 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for lightening tooth enamel and removing various stains, especially from the front teeth. It may be an extended version of the usual cleaning mode: for example, when whitening is enabled, the brush operates in a regular format for 2 minutes, then at increased intensity for 30 seconds. It's worth checking these specifics separately; also check contraindications for using this mode (especially for sensitive teeth and/or gum issues).

— Gum Massage. Gum treatment may be provided as a completely separate program or as an addition to the normal cleaning mode. This feature not only ensures effective cleaning but also strengthens the gums — useful for treating inflammation and bleeding, though it's best to consult with a doctor beforehand in such cases.

— Tongue Cleaning. A separate mode for cleaning the tongue. For many people, cleaning the tongue with an electric toothbrush causes a tickling sensation that's hard to endure for a long time. Therefore, this mode typically involves a brief duration of continuous treatment — around 20 seconds; several such 'sessions' can be made if necessary. It's also worth noting that having a tongue cleaning mode does not automatically mean a special attachment for such cleaning is included (see 'Attachments'), although such a tool is usually part of the set.

Note that in some toothbrushes, changing modes is done using 'smart' attachments: when such an attachment is installed, the device recognizes it via a built-in chip and automatically switches to the appropriate program.

The presence of a pressure sensor in the device — a sensor that monitors the force with which the working nozzle is pressed against the teeth/gums.

This feature is primarily found in toothbrushes, including those that are part of flossing system units (as discussed in the "Type" section), but it can also be included in irrigators. Its primary function is to prevent potential harm to the teeth and gums caused by excessive pressure during brushing. The sensor's response can vary from one device to another; some devices emit a warning signal, while others reduce the bristle movement speed, and some may even shut off entirely in response to excessive pressure.

Having a pressure sensor in such devices can be beneficial not only for individuals with healthy teeth but also for those with heightened sensitivity or gum issues. It's a highly desirable feature for maintaining oral health. However, it's important to note that in many models, the pressure sensor is not integrated into the main body of the device but is instead part of the replaceable nozzle. Additionally, not all complete nozzle options may have this function, so it's essential to verify these details separately when choosing a device.

The presence of its own display in the design of the device.

These displays are typically small due to the compact size of the toothbrush or irrigator body. They usually offer basic functionality, capable of displaying one color and a limited set of characters. However, even with such constraints, they can convey various operational information, such as the selected mode, timer countdown, battery status, error messages, and more. As a result, these displays enhance overall convenience and visibility when using the device.

On the other hand, it's important to acknowledge that there's a growing number of models without displays, especially in the mid to high-end range. This shift is primarily driven by the widespread adoption of smartphone synchronization (as mentioned earlier), which offers several advantages over built-in screens. Firstly, the Bluetooth module required for synchronization is smaller and more cost-effective than a dedicated display. Secondly, smartphone screens and other control gadgets tend to be larger, more versatile, and easier to read compared to the small screens on toothbrush or irrigator handles. Additionally, the display on the device's handle is not visible during use, whereas a smartphone can be positioned in front of your eyes. As a result, it's worthwhile to seek out a model with this function if the ability to access data from a display is a crucial factor for you, regardless of whether you...have a smartphone or another additional device at hand.

Additional items supplied with the device (in addition to the base and attachment set).

The most popular types of such items nowadays are charging stand, accessory stand, UV sanitizer and case ; Here is a more detailed description of each option:

— Charging stand. A battery charging device designed as a stand serves the dual purpose of recharging the battery and offering added convenience for storing the device. It's worth noting that this function can apply to dental centers, even if they primarily operate on mains power (as indicated in the "Type of power" section). In such cases, the toothbrush included with the dental center typically runs on batteries, and the charging stand is typically integrated directly into the main unit of the dental center for ease of use.

— Stand for accessories. A device designed to hold various accessories, primarily interchangeable nozzles, can come in different designs. For example, in toothbrushes and portable irrigators, this device is often integrated into a charging stand, which includes both a charging socket and open compartments for accessories. In irrigators and fixed-layout dental centers, these compartments are usually built into the main unit or the lid of the water tank. In this case, the compartments are typically covered with lids for hygiene reasons, making it...a more hygienic option. Regardless of the design, having a dedicated stand for accessories enhances the convenience of storing them.

— UV sanitizer. A device that uses ultraviolet (UV) radiation for disinfecting the device, particularly replaceable nozzles, is typically designed as a distinctive container. In some models, this container also serves as a cover or case. The disinfection process effectively eliminates the majority of pathogenic bacteria and viruses, all without the need for additional chemicals and ensuring safety as the radiation remains confined within the container. However, it's important to note that UV disinfection is not effective against regular dirt and debris, so having this function doesn't eliminate the need to clean the nozzle through washing.

— Case / cover. The device comes with a storage and carrying container, which can be either a hard case or a soft cover. Hard cases offer better protection, while soft covers are more compact and can be rolled up when not in use. Regardless, both of these accessories are highly convenient for storage and transportation. They safeguard the contents from dirt and damage, and in many cases, provide space to store additional accessories, reducing the risk of losing them. While you could use makeshift packaging for the same purpose, the provided container is typically more practical.

General dimensions of the device. Most manufacturers report this data only for stationary devices — irrigators of the appropriate variety and dental centers (see "Type") — because it is believed that toothbrushes (even with stands) are not so large as to be inconvenient, and not so varied in size, to pay attention to this difference.

Note that the dimensions are usually given only for the main unit, without taking into account the tools installed on it; however, the size of these instruments, again, it is not large enough to cause serious inconvenience.