Rated power
The power normally consumed by the lamp during operation. This parameter is often used to evaluate the overall brightness of the glow, especially in the case of lamps for headlights (see "Purpose"): such a specific parameter as the luminous flux, firstly, is less familiar to ordinary car owners, and secondly, in its characteristics are not always indicated. However, it must be remembered that only lamps of the same type (see above) can be compared with each other in terms of power consumption. different types can differ markedly in efficiency and luminosity. But what this indicator directly affects is the power consumption of the lamp and, accordingly, the load experienced by the generator or battery. Modern car lamps have a power of up to 100 W, such power consumption is normally tolerated by the on-board network in normal operation. However, the lower horsepower provides some fuel savings.
Voltage
Operating voltage of the auto lamp.
In different types of equipment, the voltage of on-board networks is also different. Therefore,
car lamps for passenger cars are designed for a voltage of 12 V, and
car lamps for trucks(and other similar equipment, such as buses) are designed for 24 V. However, there are also more specific options:
—
12/24 V. Lamps with the possibility of use in both types of on-board networks - both passenger cars and trucks. This versatility is found mainly among LED models, as well as in some types of xenon (see “Type”): these types of lamps are equipped with control circuits that can automatically adjust to the on-board network voltage.
— 85 V. Value found in models with xenon operating principle (see “Type”). In this case, we mean the voltage supplied to the lamp from the ignition unit (see below); the ignition unit itself is connected to the on-board network and is usually designed for 12 V. Data on the operating voltage of the lamp itself may be needed if you need to select a separate ignition unit for it.
- 40 V. Another option for increased voltage in xenon lamps; the meaning is completely similar to the 85 V described above, but is much less common.
Colour temperature
The colour temperature of the light emitted by the lamp. The overall colour of the glow depends on this indicator; and note that the higher the colour temperature, the more “cold” the light looks, the closer it is to blue and blue. Traditional incandescent bulbs produce warm light at 2500-3000K, 3000-3500K can be described as "slightly warmer than neutral", neutral white corresponds to temperatures of
3700-4500K, higher values correspond to cooler shades, and temperatures
over 5000K characteristic of lamps with a blue (blue) colour of the glow.
Note that in this case the colour temperature of the lamp itself (more precisely, its filament or LED element) is indicated, and not the actual shade of the glow that it will give out; for the difference between these indicators, see "Glow colour". Also note here that it is possible to evaluate the shade of light by colour temperature in headlight lamps (see "Intended use"), for which the white colour of the glow is claimed. At the same time, this indicator has a very practical meaning: the warm colour of the light is considered optimal in wet weather, the neutral one gives the highest visible brightness, all other things being equal, and the cold “long-range” one can be subjectively pleasant for some drivers, and can also be used as an element of external tuning.
Lifespan B3
Guaranteed lamp life according to B3 standard. In fact, this is the longest time that the lamp can continuously work with a 97% guarantee (it is impossible to provide a 100% guarantee in principle). This parameter is measured as follows: a test batch of lamps is used until 3% of them fail, the resulting time is indicated in the characteristics.
Other things being equal, longer-lasting lamps naturally cost more, but longer service life compensates for this disadvantage. Separately, we note that you should not confuse the guaranteed service life with the manufacturer's warranty — the conditions and warranty period may be different even for lamps with the same B3.
Lifespan Tc
The maximum continuous lamp operation time. This indicator is quite approximate and the probability that the lamp will work during this period is approximately 1 in 3. This is due to the measurement technique: a control batch of lamps is used until 63.2% of them fail, the resulting time and indicated as "maximum service life". However, the Tc data compared to the B3 guaranteed life (see above) provides a good estimate of the overall lamp life and its ability to last beyond the guaranteed life.
