USA
Catalog   /   Tools & Gardening   /   Construction Power Tools   /   Heat Guns

Comparison Interskol FE-2000 EM vs Hitachi RH600T

Add to comparison
Interskol FE-2000 EM
Hitachi RH600T
Interskol FE-2000 EMHitachi RH600T
Outdated Product
from $42.00
Outdated Product
TOP sellers
Main
Smooth temperature control. Cold air mode. Display. 4 interchangeable nozzles. Scraper. Case.
Separate button to turn on the blower at 50 °C
Typepistolpistol
Power consumption2000 W2000 W
Fan speeds
/300, 500 L/min/
/250, 500 L/min/
Max. performance500 L/min500 L/min
Temperature adjustments3
Minimum heating temperature50 °C50 °C
Max. heating temperature600 °C600 °C
Stepples t° control
Cold air mode
Power sourcemainsmains
Display
Stationary use
In box
x4 nozzles
case
scraper
x4 nozzles
case
scraper
Weight700 g570 g
Added to E-Catalogapril 2016may 2014

Temperature adjustments

The number of outlet air temperature adjustments provided for in the design of the heat gun. The adjustment itself is an almost mandatory function for such a tool — after all, different types of work and different types of materials require their own temperature values, and without it you can either “underheat” or “burn through” the workpiece. The more adjustments provided in the design of the hair dryer — the finer the temperature settings, the easier it is to choose the mode that is optimal for a particular task. At the same time, it is worth noting that in this case we are talking about step temperature control, while the most advanced option today is smooth control (see below).

Stepples t° control

The ability to smoothly change the temperature of the air supplied by the heat gun. The meaning of temperature adjustments is generally detailed in the relevant paragraph above; here we note that smooth adjustment has a number of advantages over stepped. The main one is that the outlet temperature in such hair dryers can be adjusted very precisely, and at will, and not in accordance with the fixed values \u200b\u200bthat are set in the manufacturer's settings. Among the disadvantages of this option, one can note a higher cost than most step regulators — despite the fact that in fact high tuning accuracy is not required so often, usually in professional work.

Display

The presence of its own display in the design of the heat gun. Usually, this is the simplest black-and-white LCD screen for 3-4 characters, sometimes with additional graphic indicators. However, even such a screen significantly increases the ease of management, making it more informative. Various additional data can be displayed on the display, both basic (temperature, fan speed, etc.) and auxiliary (for example, error notifications). At the same time, screens are inexpensive, so they can be found even in low-cost-level heat guns.

Weight

The total weight of the tool. On the one hand, heat guns are held in the hands during operation, which means that a lot of weight is undesirable for them — heavy devices are less “agile” and tyre the operator more. On the other hand, too little weight can mean low quality materials, a small thickness of insulation and, accordingly, unsatisfactory safety performance. Therefore, in most modern models, the weight is at least 500 g, and in the most advanced models it can exceed 1 kg. Also note that some "heavy" hair dryers may have a design that allows you to install them on a flat surface during operation.

If there are additional nozzles in the kit, the weight of the tool without them is usually indicated.
Interskol FE-2000 EM often compared
Hitachi RH600T often compared