Comparison SilverStone F1 Hybrid mini PRO vs Fujida Zoom Smart WiFi

This feature means that the power to the DVR (usually from the cigarette lighter) is supplied directly through the mount on which it is installed, and not through a separate cable. The mount itself is usually made quick-release.

Actually, the power cable in such models is also available — however, it is connected to the mount, and not to the registrar itself. Thanks to this, such a wire can be easily fixed in a strictly defined position; however, even without special fixation, he does not particularly move from his place. This feature provides a number of advantages over the more traditional connection format. Firstly, the wire does not hang around the cabin and does not create inconvenience. Secondly, it does not need to be searched for and reconnected every time when installing the recorder — just install the device on the mount. The latter is especially convenient if the recorder needs to be removed and put back often — for example, if the car has to be regularly left in an unguarded parking lot, where there is a risk of theft from the passenger compartment.

The cable is usually connected to the mount using a connector with the ability to quickly connect and disconnect — in case the wire needs to be removed from the passenger compartment without removing the mount. At the same time, many models use a standard connector like miniUSB or microUSB, which allows you to use a third-party power cable if necessary (for exam...ple, if the standard cable is lost or damaged). However, for a full guarantee, such details do not hurt to clarify separately.

The sensor is a key element of any digital camera; it is from it and from signal processing technologies that the quality of the resulting image primarily depends. In this case, the type refers rather to the brand or brand of the matrix; it is usually indicated if the recorder is equipped with a high-quality sensor that is noticeably superior to most solutions on the market.

One of the most popular such options is Sony. The specific characteristics of the matrices ( IMX179, IMX222, IMX291, IMX307, IMX317, IMX322, IMX323, IMX326, IMX335, IMX415) may vary, but anyway, such a sensor is a sign of a high-end DVR.

In addition, there are models equipped with matrices from other manufacturers — Aptina, OmniVision, Samsung(GalaxyCore), Sandvik. Such solutions are generally considered to be simpler and more democratic than Sony — both in terms of price and functionality. Nevertheless, Samsung has a lot of developments in the field of electronics, and even such r...elatively “simple” sensors are usually more advanced and of higher quality than “know-names”.

Another manufacturer that produces fairly high-quality matrices is Panasonic. Such sensors are not as widespread as those described above, but they are still found in video recorders, including pretty advanced.

Model of the processor used in the dashcam

The term "video chip" is used mainly for devices with classic capabilities, "processor" — for advanced models with an abundance of non-standard functions. However, anyway, we are talking about the same component — the main computing unit, the characteristics of which directly affect the capabilities of the recorder as a whole. Knowing the model of the processor, you can find detailed data on it and evaluate how satisfied you are with a device based on such electronics. Of the most advanced modern chips, one can name, in particular, Ambarella A7L, Ambarella A12, Novatek NTK96655, Novatek NTK96660 and HiSilicon Hi3516.

The maximum resolution and frame rate of video recorded by the recorder in the HD (720p) standard.

The classic resolution for this standard is 1280x720, but there are other options in DVRs — in particular, 1280x960 (4:3 aspect ratio). Anyway, HD is not outstanding, but quite a decent indicator that allows you to get a video with good detail (for example, it is usually quite possible to make out numbers on cars in close proximity to a car on it).

As for the frame rate, the higher it is, the smoother and less blurry the video will be, the better the details on moving objects will be visible, and also the more space the footage will take up. It is worth noting here that in some inexpensive models, shooting in HD at very low speeds — 15 – 20 fps is used to reduce the cost. Such a shooting speed allows you to watch video more or less normally, but for a normal display of moving objects, a higher frame rate is still desirable — at least 25 frames / sec. It is also worth saying that, in general, for a comfortable perception by a person, a speed of 24 to 60 frames per second is considered quite sufficient, however, among the registrars there are models that can shoot HD at 120 fps. The meaning of this speed is to ensure that individual details on moving objects are as clearly visible as possible in slow motion or frame-by-frame viewing.

The maximum resolution and frame rate of video taken by the recorder in the Super HD standard.

Super HD is a rather specific standard that exceeds Full HD in resolution, but falls short of Quad HD. The traditional frame size for this format is 2304x1296, but there are models with a lower horizontal resolution — 1728x1296. Anyway, Super HD is quite popular among DVRs: it provides good detail and does not require particularly powerful hardware.

As for the frame rate, the higher it is, the smoother and less blurry the video will be, the better the details on moving objects will be visible, and also the more space the footage will take up. However, in Super HD models this figure usually ranges from 25 to 30 fps, and this difference is hardly fundamental.

— LDWS (lane control). A system that monitors the car's position within the lane: it monitors the car's position on the road and, if it deviates from the current lane, gives a warning signal, attracting the driver's attention. This signal can literally save the lives of road users if the driver is distracted or falls asleep at the wheel. DVRs with LDWS will be especially useful for those who have to spend a lot of time driving without a break. However, if road markings are of poor quality or absent, this function becomes useless.

— FCWS(distance control). A system that monitors the distance to the car in front and gives a signal if this distance is critically reduced and a collision is possible. Typically, FCWS is activated at a certain speed (for example, 40 km/h and above), and its sensitivity can be adjusted to suit traffic density. A collision warning is usually displayed and accompanied by an audible signal.

— LLWS(headlights reminder). A sensor that monitors the level of ambient light; When the light level decreases, LLWS reminds the driver to turn on the headlights. Such a reminder may be useful not only in the dark, but also during the day - for example, in cloudy weather or when entering a tunnel.

— Sign recognition. Intelligent system for automatic recognition and analysis of road signs. Typically..., this function aims to recognize speed limit signs and provide advance warning to the driver to adhere to the prescribed speed limits. However, many recorders with a similar function perfectly “see” other road signs, duplicating them to the driver on the screen of the head unit as a kind of safety net.

- Antison. A feature that reduces the risk of falling asleep while driving. When the Antisleep mode is turned on, the recorder, as a rule, periodically plays a special sound signal; in some models this sound stops itself, in others the driver must manually turn off the signal, confirming that he is not sleeping. However, it is worth keeping in mind that even the most advanced Antison system does not provide a complete guarantee against falling asleep while driving. Therefore, the most correct behavior when you are very tired is to stop and rest; This function should be used only in extreme cases.

The diagonal of the display installed in the DVR.

A large display, on the one hand, provides additional convenience, on the other hand, it affects the dimensions and price of the entire device. Therefore, manufacturers choose a diagonal in such a way that the device can be used normally and at the same time it is not too expensive and bulky. So, for a classic registrar that does not have additional functions, a small display is enough — 2 – 2.5", 1.5 – 2", or even less : it completely allows you to manage the settings and control what exactly gets into the frame, and to fully view the footage, you still need a computer, TV or other large screen. A size of 2.5 – 3 " by the standards of such devices can already be called average, and screens of 3" or more are typical mainly for fairly advanced models, often with an abundance of additional functions.

Also note that there are models that do not have a display at all. To control the operation parameters and check the position of the frame, such a recorder is connected to an external device — for example, to a smartphone via Wi-Fi.

Resolution of the display installed in the recorder.

The higher the resolution (with the same diagonal) — the clearer the image is, but the more expensive the screen itself. At the same time, high resolutions are not needed to set the camera in the desired position and to work with the basic settings of the device. So you should pay attention to this parameter only if you plan to use additional functions that require a high-quality “picture” — for example, a GPS navigator (see “Functions”) or a remote camera that plays the role of a reversing camera.

The capacity of the internal battery installed in the device (see "Power supply").

First of all, the general purpose of the battery depends on this indicator. If the recorder uses a relatively modest battery, up to 500 mAh, this most often means that it plays the role of backup power in case of disconnection from the cigarette lighter (for example, in an accident when the on-board network failed). In such cases, you can not pay much attention to the capacity - as a rule, it is guaranteed to be enough for at least a few minutes of offline recording, and for continuous operation the device will still have to be connected to the cigarette lighter. But for a full-fledged (not “spare”) power, much more capacious batteries are required - at least 800 mAh, and ideally 1000 mAh and higher. The exception is ultra-compact motorcycle models that do not have screens and do not consume much energy - sometimes 200 mAh or even less is enough for them.

Note that theoretically a more capacious battery allows the device to work longer without recharging. However, in practice, comparing different models by this indicator, in fact, makes no sense: after all, the autonomy of the recorder also depends on its power consumption, and it is determined by a number of characteristics. Moreover, manufacturers sometimes select batteries of different capacities for different models just in such a way as to achieve more or less the same battery life.