USA
Catalog   /   Large Appliances   /   Integrated Appliances   /   Built-In Microwave Ovens

Comparison Hotpoint-Ariston MN 512 IX vs Hotpoint-Ariston MN 212 IX HA

Add to comparison
Hotpoint-Ariston MN 512 IX
Hotpoint-Ariston MN 212 IX HA
Hotpoint-Ariston MN 512 IXHotpoint-Ariston MN 212 IX HA
Outdated Product
from $210.68 up to $270.97
Outdated Product
TOP sellers
Capacity22 L22 L
Technical specs
Power750 W750 W
Controlsbuttonsbuttons
Turntable
Turntable diameter250 mm
Power levels44
Features
steam cooking
 
custom programme
defrosting
autocooking
auto-defrost
steam cooking
grill
 
defrosting
autocooking
auto-defrost
More specs
Door openingside (left)side (left)
Door opens withbuttonbutton
Inner coatingenamel
Steam cleaning
DisplayLEDLED
Dimensions (HxWxD)38.2x59.5x32 cm38x60x32 cm
Embedded dimensions (HxWxD)362x560x300 mm362x560x300 mm
Country of originItaly
Color
Added to E-Catalogfebruary 2019december 2016

Turntable diameter

The larger the diameter of the table, the larger dishes can be used in the oven. This spec directly depends on the volume of the microwave oven.

Features

— Steamer. The possibility of using a microwave oven as a steamer. For this, the corresponding accessories are included in the box of supply.

— Inverter. Inverter technology provides better and more uniform heating. In such ovens, the heater operates at the power set by the user constantly. Whereas in the absence of the inverter, the heating power is regulated by periodically turning the heater on/off. This function will be useful for those who plan to use the microwave oven for cooking complex dishes.

— Grill. Device for cooking, for example, frying meat. In microwave ovens, the grill usually has the form of a separate heating element installed in the working chamber (most often from above). Usually, it is possible to use the grill both separately and in combination with microwaves.

— Convection. Microwave ovens with convection are equipped with an additional heating element and a special fan, the task of which is to evenly distribute heated air, which results in some analogue of an oven. Convection microwave ovens cook more evenly.

— Custom programme. The ability to create your modes of operation and make changes to existing ones. Only advanced and, therefore, expensive models have such an ability.

— Defrost. The presence of this mode allows you to quickly defrost food without overheating and unnecessary hassle.

— Autoheat. It is a function that allows you to automate the process of heating cooked food....Just set the type and weight of the product, and the microwave will choose the optimal time and power for heating it.

— Autocooking. In this case, the microwave oven determines the best mode, the most suitable power and the optimal cooking time. The user only needs to indicate the products used and their weight.

— Auto-defrost. The function is useful when defrosting food — you need to specify what product is defrosted and set its weight. Next, the microwave oven will automatically select the most optimal defrosting mode and duration.

— Deodorizer. An operating mode is designed to eliminate unwanted odours in the microwave oven, which can affect the taste of the dishes being cooked. Usually, manufacturers recommend using the deodorizer after cooking foods with a strong smell, as well as in case of strong smoke.

— Temperature sensor. A sensor that allows you to determine the temperature of the food being cooked. This feature makes it much easier to monitor the cooking process. However, it is not cheap.

— Delayed start timer. With this function, you can pre-load the ingredients for cooking or ready-made food for heating into the microwave and set the time for the automatic start of the programme so that it ends at the most convenient time. For example, by the time you wake up or return from work.

Inner coating

— Enamel. The most inexpensive and common type of internal coating. The strength and reliability of enamel are generally sufficient for most cases. This material does not tolerate high temperatures, is relatively easily damaged and is prone to sticking small pieces of food and splashes, which makes cleaning difficult. As a result, the enamel is used mainly in inexpensive microwave ovens.

— Acrylic. Another fairly inexpensive material. It is not as widespread as enamel, but mainly because it appeared relatively recently. The main and only advantage of such a coating is its low cost. At the same time, it is not durable and does not tolerate strong heat, which is why it is used mainly in low-power models with a basic set of features.

- Stainless steel. In addition to its solid appearance, the steel coating has good strength and the ability to withstand high temperatures, and it is easy to clean. It is one of the best options if you plan to use the built-in grill extensively. In general, models with such a coating are noticeably more expensive than enamel ones, but this is due not so much to the coating as to more advanced features.

— Ceramics. Due to their hardness, ceramics resist scratches very well, and food particles practically do not stick to them. It makes these coatings very easy to clean. Their main disadvantage is fragility.

- Non-stick. This term may refer to various types of special coatings that prevent food from stick...ing. The best-known option is Teflon. This material has excellent non-stick properties. It is easy to clean but requires careful handling because it scratches easily. At the same time, it is believed that scratches lead to the release of harmful substances. Although, there is no unambiguous evidence for this. But with high heating, Teflon breaks down with the formation of harmful substances. However, in a microwave oven, such heating of the coating is almost impossible to achieve; and where there is such a possibility (for example, in models with a powerful grill), other heat-resistant non-stick materials are usually used.

Steam cleaning

The inside of the microwave oven is cleaned with hot steam. A container with water is placed inside, and a steam programme is turned on. The resulting steam softens even old dirt, and after processing, it is removed with a regular rag or sponge easily.

Country of origin

The country in which, according to the manufacturer, the model is manufactured. Even though most of the capacities are located in China, European factories for the production of household appliances have not disappeared. And some models can be produced on them. In general, such a division into a Chinese or European factory should not particularly affect the quality of products but the stereotype of a reliable European assembly is present. However, it is possible that the model may have a country of manufacture, for example, Poland, and in the store, under the same article, you will meet China.
Hotpoint-Ariston MN 512 IX often compared
Hotpoint-Ariston MN 212 IX HA often compared