USA
Catalog   /   Computing   /   Components   /   RAM

Comparison Crucial Ballistix DDR4 2x16Gb BL2K16G36C16U4B vs G.Skill Ripjaws V DDR4 2x16Gb F4-3600C16D-32GVKC

Add to comparison
Crucial Ballistix DDR4 2x16Gb BL2K16G36C16U4B
G.Skill Ripjaws V DDR4 2x16Gb F4-3600C16D-32GVKC
Crucial Ballistix DDR4 2x16Gb BL2K16G36C16U4BG.Skill Ripjaws V DDR4 2x16Gb F4-3600C16D-32GVKC
from $209.99 
Outdated Product
Compare prices 1
TOP sellers
Memory capacity32 GB32 GB
Memory modules22
Form factorDIMMDIMM
TypeDDR4DDR4
Specs
Memory speed3600 MHz3600 MHz
Clock speed28800 MB/s28800 MB/s
CAS latencyCL16CL16
Memory timing16-19-19
Voltage1.35 V1.35 V
Coolingradiatorradiator
Module profilestandardstandard
Module height41 mm42 mm
More features
overclocking series
XMP
overclocking series
XMP
Color
Added to E-Catalogfebruary 2020december 2019

Memory timing

Timing is a term that refers to the time it takes to complete an operation. To understand the timing scheme, you need to know that structurally RAM consists of banks (from 2 to 8 per module), each of which, in turn, has rows and columns, like a table; when accessing memory, the bank is selected first, then the row, then the column. The timing scheme shows the time during which the four main operations are performed when working with RAM, and is usually written in four digits in the format CL-Trcd-Trp-Tras, where

CL is the minimum delay between receiving a command to read data and the start of their transfer;

Trcd — the minimum time between the selection of a row and the selection of a column in it;

Trp is the minimum time to close a row, that is, the delay between the signal and the actual closing. Only one bank line can be opened at a time; Before opening the next line, you must close the previous one.

Tras — the minimum time the row is active, in other words, the shortest time after which the row can be commanded to close after it has been opened.

Time in the timing scheme is measured in cycles, so the actual memory performance depends not only on the timing scheme, but also on the clock frequency. For example, 1600 MHz 8-8-8-24 memory will run at the same speed as 800 MHz 4-4-4-12 memory—in either case timings, if expressed in nanoseconds, will be 5-5-5-15.
G.Skill Ripjaws V DDR4 2x16Gb often compared