Comparison FSP DPV 1500 IEC 1500 VA vs FSP DPV 1500 Schuko 1500 VA

Clear Table
Add to comparison
	FSP DPV 1500 IEC 1500 VA	FSP DPV 1500 Schuko 1500 VA
	Outdated Product	from $143.99 up to $164.43 Outdated Product
all specs only differences
TOP sellers	Find prices on Amazon.com Find prices on eBay.com	Find prices on Amazon.com Find prices on eBay.com
Type	smart	smart
Form factor	standard (Tower)	standard (Tower)
Switching to battery	6 ms	6 ms
Input
Input voltage	1 phase (230V)	1 phase (230V)
Input voltage range	162-290 V	162-290 V
Bypass (direct connection)	is absent	is absent
Output
Output voltage	1 phase (230V)	1 phase (230V)
Peak output power	1500 VA	1500 VA
Rated output power	900 W	900 W
Output voltage accuracy	10 %	10 %
Output waveform	similar to a sinusoid (approximated)	similar to a sinusoid (approximated)
Output frequency	50-60 Hz	50-60 Hz
Redundant sockets		4
Socket type		type F (Schuko)
Reserved C13/C14 connectors	6
Battery
Total battery capacity	9 Ah	9 Ah
Number of batteries	2	2
Full charge time	360 min	360 min
Cold start
Protection
Protection	short circuit protection overload protection noise filtering sound alarm	short circuit protection overload protection noise filtering sound alarm
Fuse	melting	melting
Control interfaces	USB	USB
General
Screen
Operating temperature	0 – 40 °C	0 – 40 °C
Noise level	40 dB	40 dB
Dimensions (HxWxD)	182x130x320 mm	182x130x320 mm
Weight	10.4 kg	10.4 kg
Added to E-Catalog	october 2016	october 2016

Redundant sockets

The number of outlets connected to the power reserve(battery) provided in the design of the UPS. In order for the UPS to fulfill its main role (providing a backup power in case of power outages), the corresponding electrical appliances must be connected to these outlets. The sockets have a standard shape and are compatible with the vast majority of popular 230 V plugs.

At a minimum, the UPS has 1 or 2 outlets and, in more advanced ones, there may be 3 or more.

Socket type

A socket for a specific type of plug in the UPS design.

— Type F (Schuko). A traditional European socket with two round holes in the center and grounding contacts in the form of two metal brackets (at the top and bottom of the socket). The term Schuko stuck to this type of socket due to the abbreviation from the German Schutzkontakt - protective contact.

— Type E (French). The French style socket has two round holes and a protruding ground pin just above them in the center. The standard has become widespread in France, Poland and Belgium (along with the traditional type F sockets).

— Type G (British). The plug for such sockets consists of two flat horizontal pins and one flat vertical pin for grounding. The standard is found mainly in the countries of the United Kingdom, Malta, Cyprus, Singapore and Hong Kong.

— Type B (American). American-style sockets are designed for plugs with two flat prongs and a semicircular grounding contact. Type B is widely used in regions with voltage 110 - 127 V - USA, Japan, Saudi Arabia, etc.

Reserved C13/C14 connectors

Number of C13/C14 connectors with power reserve provided in the UPS design.

Electrical appliances connected to connectors with a reserve are insured against a power failure in the network - in this case they switch to the battery. The C13/C14 connector itself is also known as a “computer socket”; it supplies the same 230 V as a regular household network, but is not compatible with plugs for traditional sockets, because uses three flat contacts. However, there are adapters between these standards.

At a minimum, the UPS is provided with 1, 2 or 3 C13/C14 connectors for one workstation. In more advanced, so to speak office ones, the number of C13/C14 connectors may be greater - 4 ports, 6 connectors, 8 and even more