Comparison Apple iMac 21.5" 4K 2019 MRT32 vs Apple Mac mini 2018 MRTR2

The general type of computer. In addition to classic desktop models (including gaming purposes), more unusual solutions are also found nowadays: monoblocks, nettops, microcomputers. Here are the features of each type:

— Desktop. Traditional desktop PCs, in other words, models that do not fit into any of the more specific categories. For the most part, they are not even desktop, but rather "below the table" — they are carried out in vertical cases, most often placed under the tabletop, horizontal system units are extremely rare among such devices.

— Game. A variety of desktop computers, designed for professional players and gamers-enthusiasts. Such models are necessarily equipped with a powerful hardware, which allows you to comfortably play even demanding modern games. In addition, they often provide various additional features that are useful for specialization: built-in overclocking tools, high-end customizable cooling systems, etc. Another feature of gaming PCs is a distinctive design, often quite original: in an “aggressive” style, with backlight, unusual body shape, transparent inserts, etc.

— Monoblock. Monoblocks are devices that combine a screen, system unit electronics, a set of connectors and acoustics in one case; in other words, these are monitors with built-in comp...uter “hardware”. This design has two main advantages. Firstly, the system initially has a display, and it is quite large and optimally suited to its configuration — so the user does not need to look for a separate screen. Secondly, such a computer takes up very little space — only slightly more than a monitor with the same screen size; and the absence of a separate system unit can be written down as an advantage. On the other hand, if in a regular PC the “system unit” and the monitor can be selected separately, at your discretion, then in monoblocks this is not possible — you have to get by with the combinations that the manufacturer initially offers. In addition, the possibilities for modification and upgrade for such models are noticeably more modest than for traditional ones, and there is no talk of replacing the screen at all.

— Nettop. Devices also known as "mini PCs". They are small and modestly equipped — in particular, a very limited set of ports. In addition, many nettops do not differ in performance and are designed mainly for working with documents, surfing the Internet and other simple tasks. However, there are also quite powerful performant solutions. Anyway, the main advantage of the nettop is compactness.

— Microcomputer. As the name suggests, this type of computer is extremely tiny—comparable in size to a flash drive—and looks more like portable adapters for external screens than stand-alone devices. The case of such an “adapter” usually has its own HDMI connector, which is used to connect to a monitor or TV; the same port provides power. And the case most often provides for a “mobile” energy-saving processor with integrated graphics, a compact SSD or eMMC drive, and wireless modules. Peripherals like keyboards and mice are connected mainly via Bluetooth, but many models have wired connectors like USB, and sometimes in quite a decent amount (2 or even 3). In general, such a device can be a good alternative to a tablet or laptop for those who often move between different workplaces — the main thing is that these places have appropriate screens for connection. The power of microcomputers, naturally, is low, but they are not designed for "heavy" tasks.

— Thin client. Thin clients are computers designed to be used in terminal mode for external servers. In this case, all resource-intensive calculations are performed by the server, and the functions of the thin client are limited to entering initial data and receiving results. Most of these computers do not involve independent work at all, but this is not a drawback, but a feature of specialization. In general, this format of work is not used in everyday life and in the ordinary business sphere, but it is perfect for some highly professional tasks. And since the thin client does not need high performance, it can be made as compact, lightweight and inexpensive as possible.

Diagonal of the screen installed in a monoblock (see "Type").

In general, the larger the diagonal, the more advanced both the screen and the computer as a whole are considered. The large display size is convenient for games, movies, and some special tasks like layout of large printed materials; in addition, a higher resolution can be provided for such a screen, and more space is available inside the case for advanced components. On the other hand, a larger monoblock will cost much more than a relatively small one, even if the other characteristics of such models are completely the same. In addition, the power of the hardware is not directly related to the size of the screen — high-end monoblocks can be quite small.

As for specific numbers, a diagonal of 20" or less is considered very limited nowadays, monoblocks of 21.5" are small, a 24" screen is medium, and values of 27" and 32" indicate large sizes.

Resolution of the screen installed in the monoblock (see "Type").

The higher the resolution, the clearer and more detailed image the screen can produce, but the more expensive it is. In addition, high resolutions require corresponding powerful graphics, which further affects the price of the entire computer. The minimum indicator for modern monoblocks is actually 1366x768 — this resolution allows, in particular, to play HD 720p video in proper quality. However, nowadays, the more advanced format is most widely used — Full HD, providing a resolution of 1920x1080. And in high-end monoblocks with a large diagonal and powerful graphics, there are also more solid resolutions — Quad HD(2560x1440, 3440x1440), Ultra HD 4K(3840x2160, 4096x2304) and even 5K(5120x2880) standards.

The type of matrix used in the monoblock screen (see "Type").

— TN+film. The simplest and most inexpensive type of modern matrices. In addition to low cost, the advantages of TN + Film include good speed (short response time). But the overall picture quality can be described as average: in terms of brightness, colour gamut and colour reproduction quality, screens of this type are noticeably inferior to more advanced options. However this quality is quite enough for relatively simple tasks like surfing the web or working with documents, and in most cases even for playing games and watching movies; however, TN-Film screens are not suitable for professional work with colour.

— IPS. A variety of matrices designed for high image quality. In terms of brightness and colour fidelity, such screens are indeed far superior to TN-film, making them excellent for professional use. In addition, these properties are valued among demanding gamers and movie fans. The response time in early versions of IPS screens was quite high, but in modern versions this feature is almost eliminated. But the unequivocal disadvantage of such screens is the rather high cost. Also note that nowadays on the market there are several varieties of IPS, differing in characteristics. For example, E-IPS is a relatively simple and inexpensive option, P-IPS and H-IPS are professional (when they were created, maximum attention was...paid to colour reproduction), and AH-IPS was developed with an eye on ultra-high resolution screens. So it would not hurt to clarify the specific features of such a screen separately — especially if a monoblock is bought for design, photo processing and other similar tasks that involve careful work with colour.

— pls. In fact, one of the versions of the IPS technology described above, created by Samsung. During development, special attention was paid to both improving performance and reducing the cost of the matrix; in the end, according to the creators, they really managed to achieve higher brightness and contrast, combined with a lower cost. In general, the characteristics are comparable to mid-level versions of IPS.

— *VA. Various versions of VA technology — Fujitsu's MVA, Samsung's PVA and Super PVA, Sharp's ASVA, etc.; In general, there are no key differences in design between these versions. The *VA technology itself was created as a compromise between the speed and affordability of TN-Film matrices and the high-quality "picture" of IPS. The result is screens with more accurate and complete colour reproduction than TN, with good blacks and good viewing angles; the response speed was initially not very high, but in modern versions this drawback has been practically eliminated. At the same time, a feature of *VA screens is that the colour balance of the visible image depends on the viewing angle and changes with the slightest deviation from the perpendicular. With normal PC use, this phenomenon is almost imperceptible, however, such monitors are still poorly suited for professional work with colour.

Type of own screen cover in monoblock (see "Type").

— Glossy. The most common type of coating in modern PCs. Such a surface (with the same characteristics of the matrix) noticeably surpasses the matte one in terms of brightness and colour saturation in the visible image. The main disadvantage of gloss is the tendency to glare in bright ambient light; however, all-in-one PCs are not often used in such conditions, and this phenomenon can be compensated by increasing the brightness of the backlight. With all this, this type of coverage is quite inexpensive.

— Glossy (anti-glare). A modified version of the glossy finish (see above) that, as the name suggests, is more resistant to glare. At the same time, in terms of picture quality, such screens are usually not inferior to classic gloss. On the other hand, the anti-reflective surface is somewhat more expensive, and its advantages in this case are not often really significant. Therefore, screens with such a coating are found in modern monoblocks much less often than glossy ones.

— Matte. The key advantages of a matte finish are its low cost and the almost complete absence of glare, even in bright ambient light. On the other hand, the image on such a screen is dimmer than on glossy displays (including anti-glare) with similar matrix characteristics. Therefore, this type of coating is rarely used...nowadays — mainly in relatively inexpensive household and business models, for which a bright picture with saturated colours is not fundamental.

The maximum brightness provided by the monoblock screen (see "Type").

The more intense the ambient light, the higher the screen brightness should be for normal visibility. The most "dim" screens in monoblocks are capable of delivering up to 200 cd / m2 — this is more than enough to work under ordinary artificial lighting, but under sunlight it will take at least 300 cd / m2. At the same time, modern monoblocks can also have a larger margin of brightness — in some models up to 500 cd / m2. This expands the possibilities for customizing the screen for different situations and user preferences. In addition, high brightness has a positive effect on image quality and colour saturation, in light of which it is often a sign of a fairly advanced screen.

The number of slots for RAM modules provided on the PC motherboard. In this case, we are talking about slots for removable strips; for a PC with built-in memory, this parameter is irrelevant.

The slots available on the "motherboard" can be occupied all, partially or not occupied at all (in models without RAM). Anyway, you should pay attention to their number if the initially installed amount of RAM does not suit you (or ceases to suit you over time), and you plan to upgrade the system. The smallest amount found in a PC with removable memory is 1 slot ; if it is busy, you will only have to change the bar when upgrading. More connectors for RAM are always paired, this is due to a number of technical nuances; most often this number is 2 or 4, but it can be large — up to 16 in powerful workstations.

Note that when planning an upgrade, you need to take into account not only the number of slots and type of memory (see above), but also the characteristics of the motherboard. All modern "motherboards" have restrictions on the maximum amount of RAM; as a result, for example, the presence of two DDR4 slots does not mean that two strips of maximum capacity can be installed in the system at once, 128 GB each.

The type of graphics card used in the PC. Modern computers can be equipped with both integrated modules (among those you can find products of Apple and Intel – HD Graphics, UHD Graphics and Iris) and discrete video cards (including professional ones), which can be installed in several pieces using SLI or CrossFire technology. In addition, on the market you can find configurations that are not equipped with graphics adapters at all. Here is a more detailed description of each option:

— Integrated. Video cards that are built directly into the processor (less often, into the motherboard) and do not have their own dedicated memory: the memory for video processing is taken from the general “RAM”. The main advantages of such modules are low cost, low power consumption, minimal heat release (which does not require special cooling systems), and extremely compact dimensions. On the other hand, the performance of this type of graphics is low: it is enough for simple everyday tasks like web surfing, watching videos and undemanding games, but for more serious purposes it is still desirable to have a discrete video adapter in the system. And the fact that integrated systems take...up part of the system RAM during operation does not contribute to performance either.

— Discrete. Video cards in the form of separate modules with a specialized processor and their own memory. They are noticeably more expensive than integrated ones, take up more space and consume more energy, but all these shortcomings are offset by a key advantage — high performance. This allows you to work even with “heavy” graphic content like modern games, 3D rendering, high-resolution video editing, etc. (although the specific characteristics of discrete graphics, of course, may be different). In addition, graphics processing in such systems does not use the main RAM, which is also an important advantage. For additional performance enhancement, discrete video adapters can be combined into SLI / CrossFire systems, this option is indicated separately (see below). Also note that in most modern PCs, such graphics are combined with a processor with an integrated graphics core, and often work in hybrid mode: the integrated module is used for simple tasks, and when the load increases, the system switches to a discrete graphics card.

— SLI/CrossFire. Several discrete video cards (see above) bundled using SLI technology (NVIDIA is used) or Crossfire (AMD is used). From the point of view of an ordinary user, there are no fundamental differences between these technologies: both of them allow you to combine the computing power of several video cards, thus increasing graphics performance. However, such graphics are not cheap, and therefore they are used exclusively in high-performance PCs with an emphasis on graphic capabilities — in particular, gaming ones.

— Sold separately. The absence of any graphics card in the initial configuration of the PC. A rather rare option found in some high-end workstations: such configurations are equipped with professional processors without an integrated graphics core and do not have discrete graphics — it is assumed that such an adapter is more convenient for the user to buy separately.

The main manufacturers of video cards nowadays are AMD, NVIDIA and Intel, and each has its own specifics. NVIDIA produces primarily discrete solutions; Among the most common are the GeForce MX1xx, GeForce MX3xx, GeForce GTX 10xx series (in particular GTX 1050, GTX 1050 Ti and GTX 1060), GeForce GTX 16xx, GeForce RTX 20xx, GeForce RTX 30xx( GeForce RTX 3060, GeForce RTX 3060 Ti, GeForce RTX 3070, GeForce RTX 3070 Ti, GeForce RTX 3080, GeForce RTX 3080 Ti, GeForce RTX 3090, GeForce RTX 3090 Ti), GeForce RTX 4060 , GeForce RTX 4060 Ti, GeForce RTX 4070, GeForce RTX 4070 SUPER, GeForce RTX 4070 Ti, GeForce RTX 4070 Ti SUPER, Ge Force RTX 4080, GeForce RTX 4080 SUPER, GeForce RTX 4090 and separate Quadro series. AMD offers both discrete and integrated graphics - including the popular Radeon RX 500, Radeon RX 5000, Radeon RX 6000, Radeon RX 7000 and AMD Radeon Pro series. And Intel deals exclusively with modules integrated into processors of its own production - these can be HD Graphics, UHD Graphics and Iris.

Note that many configurations with discrete graphics also have an integrated graphics module; in such cases, the name of the discrete video card is indicated as more advanced.