Place settings
The maximum number of place settings loaded into the dishwasher at once. A place setting is considered a set of dishes for one person: four plates (for the first course, for the second course, salad, bread), a saucer for dessert, a cup, a spoon and a fork.
The large capacity allows you to wash numerous dishes in the machine at once without starting the washing programme again. At the same time, a large capacity may be undesirable. Firstly, a capacious working chamber affects the dimensions of the entire machine. Secondly, such units consume more water. Thirdly, if there are not many dirty dishes, you either have to wait until it accumulates, or start an underloaded machine, wasting water and detergents. Therefore, when choosing according to this indicator, you need to consider real needs and not chase the maximum capacity.
Water consumption per cycle
The amount of water used by the machine in one wash cycle. Usually, it is indicated for a standard (universal) programme — at full load, without pre-rinsing, etc. Accordingly, in special modes, the consumption may differ from the indicated one.
The lower the consumption, the better. On the other hand, a reduction in consumption can harm the quality of the wash. So, when choosing an
cost-effective machine, you should pay special attention to the wash class (see below). In addition, only models of the same capacity can be compared in terms of consumption — after all, the more dishes, the more water is required to wash them.
Delay timer
A timer that starts the machine at a user-specified time eliminates the need to do this manually. This function is useful, for example, if the electricity tariffs during the day and at night are different. You can save on electricity bills by setting the start of washing at night.
End-of-cycle signal
Signal indicates that the machine has finished working. Many dishwashers are quiet, and without a special signal, it can be difficult to determine if the programme has ended.
Energy class
The energy efficiency class characterizes the efficiency of the dishwasher's energy consumption. Initially, the classes were designated in Latin letters from
A(high degree of economy) to G (high consumption). However, later, with the development of energy saving technologies, more advanced classes appeared than A (
A+,
A++, A+++). The more benefits, the higher the savings. Most modern dishwashers comply with energy classes from A to
A+++(the latter is 30% more economical than the original class A).
Other things being equal, more efficient models cost more, but the difference can be recouped in energy savings. Note that the energy consumption class does not describe efficiency in general but in comparison with other similar models; therefore, the actual consumption of a small class A machine may be lower than that of a large class A++ model.
Noise level
It is an approximate noise level produced by the dishwasher during operation. In modern models, this parameter can range from 38 – 39 dB (muffled human voice) to 59 – 60 dB (rather a loud conversation); more detailed decoding of what sound corresponds to a particular number of decibels can be found in special tables. Anyway, the
low noise level contributes to the comfortable use of the device. It is important if the dishwasher is to be used at night.
Dimensions (HxWxD)
Dishwasher dimensions in height, width and depth, respectively. A fairly obvious parameter; we only note that often when looking for a place to install, the width and height of the unit are of key importance.
In most modern dishwashers, the width corresponds to one of the standard values (plus or minus a centimeter):
45 cm for narrow models,
65 cm for standard ones and
55 cm as a compromise between these dimensions. As for the second size, dishwashers with a height of up to 60 cm inclusive are usually classified as
compact, such models mainly involve installation on a table, cabinet or other similar stand. Height over 60 cm already allows you to put the machine
on the floor.