Capacity
The maximum amount of dry laundry at which the washing machine provides normal washing quality and does not experience overload. For two people, a machine with a capacity of up to
5 kg is enough, for more — accordingly, more. The optimal value for families are
models for 6 and
7 kg. For large families,
washing machines for 8 kg,
9 kg and even
10+ kg will be appropriate. For small apartments, it is worth noting
narrow washing machines that have a depth of up to 40 cm, but at the same time capacity like in full-size machines.
Note that for different work programmes the allowable capacity can also be different. For example, for a quick wash, this number is most often noticeably less than the maximum stated in the specifications. These details should be specified in the instructions for the unit.
Water consumption per cycle
The volume of water used by the washing machine during a standard wash cycle. It is measured while washing the maximum amount of cotton underwear for this model with a normal programme and a temperature of 60 degrees.
When evaluating efficiency, one should consider not only the actual water consumption but also the maximum load. So, for example, a model with a load of 7 kg and a consumption of 49 litres per kilogram of laundry will be more economical than a model of 5 kg with a consumption of 40 litres: the first consumes 49/7 = 7 litres per 1 kg of laundry, the second 40/5 = 8 litres per kilogram. This moment is important, first of all, if a large amount of washing is expected.
Many modern automatic washing machines are equipped with intelligent systems that can adjust the water consumption to the actual load and avoid overspending.
Energy class
This parameter characterizes the efficiency of electricity consumption by the washing machine. Classes are designated in Latin letters from A to G, in ascending order of energy consumption. At the same time, in class
A there are subclasses "A+", "
A++ " and "A+++"; more pluses means less energy consumption, and the most economical option to date —
A +++ — outperforms class A by almost a third.
Machines of classes
A + and above are today considered economical, class A — medium, lower classes — high consumption. However, indicators below A are typical for semiautomatic low-cost models. As well as for units with dryers (see above) in which high energy consumption is simply inevitable.
Display
The type of display provided in the design of the washing machine.
The display located on the control panel provides additional convenience: it can show various information about the operation of the machine. In this case, the specific functionality of the display depends on its type. So, in the vast majority of cases, the simplest
LED displays are used. They can only display numbers and some special characters, but even this is usually sufficient. In some models,
TFT displays can be installed — similar to those used in smartphones. Such a display can display not only text information but also various graphics, and sometimes it is even made touch-sensitive. However, it makes sense to use such displays only in high-end washing machines with an abundance of functions.
Noise level (spin)
The maximum noise level produced by the machine during operation. Most often indicated for spinning — this is the noisiest mode of operation; for units without spinning (such as semiautomatic devices), this paragraph indicates the overall volume or the volume in the noisiest mode.
The
quieter the machine works, the more comfortable it is for others. This moment is especially critical if there are small children in the house. However, the decibel used to measure loudness is a non-linear unit, and the actual noise level is best estimated from comparative tables in special sources.
Country of origin
The country in which the washing machine was manufactured (according to the manufacturer's statement). Despite the fact that production facilities in
China are often used to assemble household appliances, specifically among washing machines there are many products assembled in Europe (
Germany,
Italy,
Poland,
Romania,
Slovakia,
Slovenia, Turkey) or in the post-Soviet space (
Belarus,
Russia,
Ukraine).
There are many stereotypes about how the build quality depends on the specific "homeland" of the device. However, most of them are not justified: the thoroughness of quality control does not depend directly on the location of production. And within individual brands, the situations in this regard can be completely opposite: relatively speaking, for one company, Polish-assembled machines can be considered more reliable than Romanian ones, and for another, vice versa. In addition, such information (about which plant a given brand has is better) often turns out to be unconfirmed rumours. In light of all this, it makes sense to pay attention to the country of production. Especially if you fundamentally want (or do
...not want) to support a certain state by purchasing products manufactured in it.