USA
Catalog   /   Large Appliances   /   Cookers

Comparison Liberton LIC 2000 black vs Ergo HP 1509 black

Add to comparison
Liberton LIC 2000 black
Ergo HP 1509 black
Liberton LIC 2000 blackErgo HP 1509 black
Outdated ProductOutdated Product
TOP sellers
Hob typeelectricelectric
Burner controlstouch controlstouch controls
Hob
Hob materialglass ceramicsglass ceramics
Number of Hi-Light burners11
Residual heat indicator
Burner power2 kW1.8 kW
More features
Child lock
Automatic switch-offhob
More specs
Connected load2 kW1.8 kW
Dimensions (HxWxD)6.5x28x36 cm7x28x36 cm
Color
Added to E-Catalogjune 2019december 2017

Residual heat indicator

The residual heat indicator is is used in electric stoves. It allows you to determine the presence of hot burners when the power is off, thus reducing the risk of burning yourself on a burner that has not had time to cool down. In addition, the presence of such an indicator helps to save energy.

Burner power

Rated burner power. This parameter allows you to estimate how much electricity the burner will spend when operating at maximum heating intensity. At the same time, the heat transfer power of different burners can be different, and the actual heating efficiency will also greatly depend on the specs of the dishes. As a result, it hardly makes sense to evaluate the operating capabilities of the stove by the power of the burners. It is quite possible to proceed from the fact that the burner will be enough for a dish of the same diameter.

Automatic switch-off

The type of automatic switch-off provided in the design of the stove.

Auto-off can be provided for the hob(hob), for the oven, or for both at once, regardless of whether the hob and oven are gas or electric. This function is implemented through a timer, after which the device turns off.

Connected load

The connected load of the stove is the maximum electrical power consumed during operation. This parameter is indicated only for models that are equipped with at least one electric heater — burner (burners), oven or grill. It is the burners that are the highest consumption in terms of energy consumption; Features such as auto-ignition or oven lighting require little energy, a ordinary socket is enough for them.

First of all, the requirements for the power grid depend on this indicator: it must be able to provide such power without overload. It is worth noting that for household sockets the power limit is about 3 – 3.5 kW; with more power, you need to connect the stove to a 230 V network according to special rules. An alternative is a three-phase 400 V mains: most modern stoves with electric heaters allow connection to both 230 V and 400 V.
Liberton LIC 2000 often compared
Ergo HP 1509 often compared