Heating element
The type of heating element provided in the device.
- Tubular heater, an element in the form of a tube, inside which there is a heating coil and a filler made of sand, ceramics, oil or other heat-conducting material/liquid. Heating elements do not heat up as quickly as spirals, and are somewhat more expensive; on the other hand, they are more fireproof. Moreover, the relatively low operating temperature prevents (at least partially) the combustion of dust and the appearance of unpleasant odours.
-Spiral — in this case, an open electric spiral is meant. Provides fast heating due to the high operating temperature. However, of all types of heating elements, it is the most fire-hazardous, and dust on the coil causes an unpleasant odor.
- Ceramic. The heating element constructed using ceramic plates. In this case, we are talking about a classic heater, which provides heating mainly due to convection; models with IR heating are placed in a separate category (see below). The main advantage of ceramic heaters over tubular heater and spiral heater is a relatively low operating temperature, which not only prevents the combustion of dust but also reduces the risk of burns (and the likelihood of fires is reduced to almost zero). In addition, ceramic elements are reliable and durable. Their main drawback is their high price.
— Ceramic with IR heating. Ceramic heaters (see above), are capable of providing heating not only due to direct contac...t with air but also due to infrared radiation. They are mainly used in convectors, but can also be installed in infrared heaters. Recall that IR radiation does not heat the air, but directly the objects to which it is directed, while the heat from heating is felt instantly, but only as long as the heater is turned on. Convection, in turn, allows you to warm up the entire volume of air in the room, but this can take quite a long time. The combined heater combines the advantages of these methods of operation and mutually compensates for their shortcomings: with its help, you can quickly heat individual parts of the room and, at the same time, warm the air inside. This can be useful, for example, if you need to heat a cold room and at the same time quickly warm yourself. The main disadvantage of elements of this type can be called a high cost. It is also worth considering that a specialized heater will be more appropriate than a universal one — for example, it is more reasonable to use classic IR heaters outdoors since the heat from the convector in such conditions will “fly away into the atmosphere”. A heating element consisting of a heating element and an IR heater also works on a similar principle. See above for more details on the operation of the heating element.
— Heat exchanger. A heating element found exclusively in gas heaters (see "Power supply"). It has the form of a long curved tube: through it, the products of combustion of gas move from the burner to the chimney, cooling down along the way and giving up their heat to heat the room. For more efficient heat transfer, the surface of the tube can be supplemented with fins, plates and other elements that increase the area of contact with air.
- Stitch heater. At the heart of the stitch heater is a set of thin and long metal protrusions, similar to needles. One of their key advantages is the almost instantaneous heating to operating temperature. On the other hand, this temperature is higher than that of heating elements, which leads to rapid drying of the air and increases the likelihood of unpleasant odours (dust or other contamination that gets on the needles is likely to be burned). Stitch heaters are found exclusively in convectors (see "Type").
Safety system
— Overheat protection. The system of automatic shutdown of the heater when the critical temperature of the heating element is reached (which can happen, for example, if the fan heater motor fails). Ensures the fire safety of the device.
— Waterproof. The presence of a body protected from water splashes (most often sealed). Such heaters can be used in rooms with high humidity — for example, bathrooms — without the risk of short circuits or electric shock. However, even in such models, it is imperative to clarify the specific degree of water protection and restrictions on use before use; these data can be found in the instructions or other official documents of the manufacturer.
— Child lock. The control lock function prevents playful children or animals from changing the settings. Relevant for advanced devices with extensive management capabilities.
— Tip-over protection. A system that turns off the heater when it tips over to avoid fire or damage to the floor. This feature is especially relevant if there are small children in the house.
— Motion sensor. The presence of an appropriate sensor allows the device to focus on the presence of people and, by this, warm up the room. So, the absence of any movement in the "field of view" of the heater puts it into sleep mode. And the detection of movement (be it a dog or a person) reactivates it.
— Open window sensor. A special sensor allows the device to automatically recogni...ze when a window is opened for ventilation. In the process of airing the premises, the heater either turns off completely or switches to the most economical operation mode. This function allows you to save energy because, in the process of ventilation, the room heat will still evaporate into the street. Usually, the heating stop time is up to 30 minutes — in some models, the exact ventilation time can be adjusted by the user. The very fact of ventilation is most often fixed by the electronics. To do this, automation can use either traditional magnetic contact sensors or draft sensors (cold air inflow).
