USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Bathroom & Shower   /   Taps

Comparison Armatura Ferryt 542-955-00 vs Armatura Baryt 552-915-00

Add to comparison
Armatura Ferryt 542-955-00
Armatura Baryt 552-915-00
Armatura Ferryt 542-955-00Armatura Baryt 552-915-00
from $23.12 up to $26.40
Outdated Product
from $25.52 up to $26.40
Outdated Product
TOP sellers
Suitable for
for a washbasin
for a washbasin
Tap typesingle leversingle lever
Spout
Shapebent at an anglebent at an angle
Swivel
Jet depth150 mm
Jet height70 mm
Specs
Stop valveceramicceramic
Water flow
12 L/min /at 3 bar/
12 L/min /at 3 bar/
Installation
Installationdesktop (horizontal)desktop (horizontal)
Mounting holes1 шт1 шт
Mounting hole diameter35 mm35 mm
Inlet communication
hoses /G 3/8" or G 1/2"/
hoses /G 3/8" or G 1/2"/
General
Materialbrassbrass
Finish
chrome
chrome
Tap height120 mm
Color
Added to E-Catalogfebruary 2015october 2012

Jet depth

Distance from the fixing point (for vertically mounted taps) or from the centre of the mounting hole (for horizontally mounted taps) to the middle of the spout. It is a characteristic that determines the "reach zone" of the tap.

Jet height

The jet height is usually specified for taps with horizontal installation (see "Type of installation"). It is measured from the base of the tap to the spout outlet. The large height of the spout is important primarily for kitchen models (see "Suitable for"), because it allows you to place large dishes in the sink. This parameter is directly related to the height of the spout (see above): the height of the jet cannot be greater than the height of the spout. Thus, in fact, one has to find a compromise between the height of the jet and the dimensions of the tap, especially if there is little space for its installation.

Tap height

The height of the tap, measured from its base or lowest point to the highest point of the spout. The height of the spout partly determines the installation possibilities — in fact, this is the minimum vertical free space that is required for the tap. In addition, in models with horizontal installation (see "Type of installation"), the spout height is related to the jet height (see below).