Drain (to the sewer)
The design of the outlet pipe of the toilet bowl. It determines, in particular, the features of its installation. To date, there are such options:
—
Horizontal. In such toilets, the outlet pipe is located at the back of the bowl and is oriented horizontally backwards. This is one of the most common types in Europe and the post-Soviet space - it is due to the fact that sewer pipes in these countries are drawn along the floors, and the pipe in the bathroom is usually located under the wall, behind the toilet.
—
Oblique. In fact - a kind of horizontal release (see above), in which the outlet pipe is not strictly horizontal, but at an angle (usually 30° or 45°). It will be useful in the case that the sewer pipe is low, near the floor.
—
Vertical. As the name suggests, in these toilets the output is directed vertically down. They are mainly used in the United States and other American countries, where in the construction of communications, e.g. sewerage, conducted under the floor (ceiling) without taking into account the partitions - as a result, the toilet can be placed directly above the pipe. This layout is also found in the post-Soviet space, in particular in office and production premises, as well as in residential buildings on individual projects.
—
Universal. The universal release design allows it
...to be connected to one of the three above options, depending on the specific need. Most often, the output of such toilets is hidden inside, and its own nozzle is absent; for connection selected separate pipe of the desired shape, it can go vertically, horizontally or at an angle.
It should be noted that it is theoretically possible to install a toilet with horizontal release in the bathroom under the vertical, and vice versa - but in practice, this is very difficult and actually requires the reconstruction of the toilet. And therefore, before choosing a toilet, you must clarify the design of sewer pipes in your bathroom and the most suitable type of outlet.Bowl
—
Funnel. The bowl of such a toilet bowl is a funnel with approximately the same tilt angle on all sides and a siphon hole in the middle. The advantages of this design are a minimum of unpleasant odors, economy and the fact that the use of the brush is extremely rare: solid waste is almost immediately hidden under the water in the openings of the siphon, not hanging outside and does not require significant water flushing. The main disadvantage of the funnel is spray; however, many manufacturers use design solutions to minimize this inconvenience.
—
Visor. This construction is similar to the funnel (see above), but the slope of the bowl walls is uneven - the back wall may have a greater slope than the front, or vice versa. The main advantage of visor toilets is the absence of spray in combination with economy and minimum unpleasant odors. At the same time, solid waste can be trapped on the bowl wall, which will require slightly more water consumption and more frequent use of the brush than the funnels.
—
Dish. The bowl of this type is equipped with a shelf, usually located behind the opening of the siphon. This ensures that there is no splash; moreover, unlike all other types, the waste does not fall into the siphon until it is washed off, but is on the shelf - this makes it possible to determine their condition, which is important for medical purposes. A
...t the same time, dish bowls are characterized by strong odors, and solid waste can stay there, which requires frequent use of brush and increases water consumption. In addition, a certain amount of water is constantly on the shelf, which may lead to the appearance of aesthetic divorces. As a result, this design is considered outdated and rare.Water supply
Location of the pipe for supplying water to the toilet bowl. Modern toilets contain
lateral,
rear and
bottom water supply. In the first two types of pipes are located at the top of the tank, and the choice between side and rear supply in practice depends mainly on the location of pipes in the head and, accordingly, the convenience of connection. The bottom line is considered the most modern option: it provides a minimum level of noise when filling the tank, in addition to being easy to conceal, thus ensuring aesthetics.
Some models in our catalogue have combined signs of supply -«side/ bottom» or «side/ rear». This can mean both a versatile device, with the ability to select the type of connection, and a model produced in several variations different type of supply.
Functions
Among the basic functions of the toilet, one can single out
circular flush of water in the bowl,
half flush,
antibacterial coating, anti-
splash, micro-lift of the
seat. More about them:
— Vortex flush (in the bowl). In toilets with a vortex flush, water flows from holes under the rim and sequentially washes the entire bowl through the formation of a characteristic water vortex. Jets of water can be directed from the outlets straight or at a slight angle: the first option is called swirling, the second – shower. The advantages of a vortex flush are low water consumption, high-quality cleaning of the toilet, absence of splashes and minimal noise levels. However, sanitary equipment with such a flush system are often more expensive than traditional solutions.
- Half drain. The ability to drain from the tank not all the water, but only a part, usually half (hence the name). It is due to the fact that a complete drain is not always required - for example, half a tank is enough to flush urine even in toilet bowls with a plate bowl (see "Bowl Shape"). This function will be useful primarily for those for whom water saving is critical (for example, if meters are installed in the apartment).
- Anti-splash. The anti-splash system prevents water splashing on the sides when the water is drained
...from the tank. Anti-splash toilets have a special bowl design. In them, the bowl is inclined, the water flowing down the inclined plane from the tank immediately goes into the sewer drain. The "anti-splash" function allows you to increase the level of hygiene and sanitation in the restroom. Toilets with an anti-drain system also have disadvantages. The main disadvantage of such models is the increased water consumption.
— Seat microlift. A device that prevents the toilet seat from hitting the rim of the bowl. It works similar to door closers: the movement of the seat is slowed down, slowing down as much as possible when approaching the rim, which ensures soft contact, prevents unpleasant popping and protects the seat and rim from damage and wear. In addition, the microlift provides additional convenience - you just need to push the seat, and it will lower itself.Toilet material
—
Sanitaryware(“sanitary faience”). The most common material for modern toilets, at a low cost, has a neat appearance, is durable and reliable. The main disadvantage is the porous structure, which contributes to the accumulation of dirt and odors (although recently technologies have been applied to eliminate this disadvantage). The service life of such material in modern toilets can reach 40 years.
—
Sanfarfor(“sanitary porcelain”). Like sanitary ware, it belongs to ceramic materials, however, with similar strength and appearance, it absorbs water and dirt much less easily, due to which it has a longer service life - up to 60 years. However, sanitary porcelain is also more expensive.
- Stainless steel. The key advantage of “stainless steel” is its high strength: this material can easily withstand even strong impacts that can crack sanitary porcelain or sanitaryware. On the other hand, such toilets are not cheap, despite the fact that the mentioned strength in reality is not needed so often. Therefore, it makes sense to pay attention to this option in cases where reliability and resistance to damage are of key importance - for example, if plumbing fixtures are purchased for a stadium, bar, etc., and must be vandal-resistant.
- Ceramics. These or other types of ceramics that either do not belong to the sanitary porcelain or sanitary ware described above, or represent specific v
...arieties of these materials. The specific features of ceramic toilets should be clarified separately; however, for the most part these are quite advanced and high-quality products.
Moreover, each of the listed materials may additionally have a special antibacterial toilet coating that prevents the growth and reproduction of bacteria. It significantly improves the hygiene of use, but affects the price.Weight
The total weight of the product; for compact-toilet (cf. «Type»), as a rule, is specified for standard equipment - together with «native» tank (empty).
When choosing floor models on this indicator you can not pay much attention, but for a hanging toilet bowl (see. «Installation») weight is quite principial: because the installation (or other attachment) should normally withstand both the design and the user sitting on it.
Bowl height
The height of the toilet bowl, namely the upper edge of the bowl.
In floor models (cf. «Installation») this size is considered from the base, in suspended - from the bottom edge. It should be borne in mind that hanging articles are usually set at a height of at least 5 - 10 cm above the floor, so the actual height of the bowl will be greater by the appropriate amount. Flooring models are usually placed at the floor level, and the actual height of the bowl in them corresponds to the stated (theoretically it is possible to adjust this height by installing the toilet at an elevation or recess, but in practice it is easier to choose the model of the desired height).
The lowest height values -
up to 30 cm inclusive - can be found exclusively in hanging toilets (this is not inconvenient given the features of installation). The same type of installation applies to most models on
31 - 34 cm and
35 - 37 cm, although these categories already include floor products. However, among the latter, the most popular height -
38 - 40 cm, is also very common outdoor toilet bowls height
more than 40 cm (in suspended models the height is higher than 38 cm and rare).
Regarding the choice of this parameter, it is worth considering the use of the toilet. Thus, for public use, the best option is considere
...d to be the actual height of the bowl of 40 - 44 cm; this height is clearly prescribed in some sanitary standards, it is convenient for most adults and is quite acceptable for children (except for the smallest, who already require the help of an adult when using the toilet). But for personal use, the toilet should be selected more carefully, and here may be suitable values. The general rule is that, ideally, the legs of a seated person should be bent at a right angle and freely stand on the floor without hanging or straining themselves beyond measure. However, people in the family may differ markedly in stature and needs. In general, therefore, it is recommended to take into account the growth of the highest family member and, in the case of a person with special needs, those needs first.Dimensions (HxWxD)
General dimensions of the toilet bowl in height, width and depth (by depth is meant the distance from the front edge to the rear edge).
These indicators allow you to determine how much space is required to install the product, and also affect some practical points. In this case, width and depth are of key importance. Specific figures and nuances for these dimensions are as follows:
- Width:
up to 35 cm in the narrowest models,
40 cm or more in the widest, intermediate options -
36 - 37 cm and
38 - 39 cm. A large width is desirable if people of large build will use the toilet. However, it should be borne in mind that this dimensions is indicated by the widest part of the structure, and this is not necessarily a bowl - we can talk about a tank.
- Depth:
up to 50 cm - is considered small, in the largest products -
more than 65 cm ; intermediate options include
51 - 55 cm,
56 - 60 cm and
61 - 65 cm. Here the choice depends on the height and physique of the user: tall people and people with long legs will be most comfortable with toilets with great depth.
Height is worth mentioning. In models without a tank, it corresponds to the height of the bowl
..., see more about this indicator above. In compact toilets (see "Type"), the height with the tank is usually indicated, it depends on how much vertical space is required for installation. Here, an indicator of 75 cm or less is considered small, 76 - 80 cm is average, 81 - 85 cm is above average, and for the highest products, more than 85 cm of free space above the floor will be required.Country of origin
The country of origin of the brand under which the toilet is marketed. Nowadays, on sale you can mainly find products from such countries (in alphabetical order):
Belgium,
Germany,
India,
Spain,
Italy,
Poland,
Turkey,
France,
Czech Republic,
Switzerland,
Sweden,
Japan.
There are many stereotypes related to how the origin of goods from a particular country affects their quality. However, in general, these stereotypes are unfounded. Firstly, this paragraph does not indicate the actual place of manufacture of the toilet bowl, but the "homeland" of the trademark (or the location of the manufacturer's headquarters); production facilities may be located in another country. Secondly, the actual quality of the product depends not so much on geography, but on the organization of processes within a particular company. So when choosing, it is best to focus not so much on the "nationality" of the toilet, but on the overall reputation of a particular brand. And paying attention to the country of origin makes sense if you fundamentally want (or do not want) to support a manufacturer from a
...certain state.