Comparison Grohe Costa S 26317001 vs Grohe Avina 26011000

The shape of the handles provided in the design of the tap of the corresponding type — usually two-valve (see "Tap type").

This feature mainly affects the appearance of the structure, but different design options also have practical application features:

— Cross. Gates in the form of classic four-pointed crosses are the most popular design nowadays. It is great for retro-style taps, but can also be used in more modern designs. However, the main advantage of this option is the presence of reliable stops under the fingers, which makes cross handles very convenient to use. This is primarily due to their popularity. The disadvantages of "crosses" include some difficulty in cleaning due to the abundance of protruding parts; however, to facilitate this task, the bars of such a handle can be made removable.

— Round. This category includes both strictly round valves and parts that have small protrusions or recesses for a more secure grip (and in the first case, for the same purpose, a special notch may be provided around the circumference of the valve). Anyway, the main advantages of round products are a neat appearance and maximum ease of cleaning. On the other hand, this shape is the least secure to hold, requires a tight grip, and is most likely to slip the handle in the hand when turning. However, most often modern taps do not require much effort, and this moment is not particula...rly critical.

— Triangular. Handles with three pronounced cutouts or protrusions. The specific shape may be different: some models are very close to round, others have the shape of triangles, others differ from cross handles only in the number of rays. The stronger the shape of such a handle differs from a circle, the more reliable it is to hold. On the other hand, sometimes the best option in terms of design are more rounded models.

— Square. Handles with four pronounced cutouts or projections. Note that a strictly square shape is rare, mainly in expensive designer taps (in fact, for design reasons, it is used in them). Much more popular are "square" handles in the form of a kind of star with four rays/petals. This is a kind of compromise between round and cross-shaped: the handle turns out to be more secure in holding than round, and more convenient to clean than the "cross".

— Polygonal. "Handles with corners", not related to the triangular or squared described above. The most popular type of such parts is round rotary knobs with a set of protrusions — “rays” (from 5 or more) for reliable retention; however, there are also more specific options — for example, an oblate polygon that resembles a figure eight.

— Oval. Handles having an oval or close to it shape (for example, a rectangle with rounded corners). One of the options for this design is bath and shower taps, in which the body has a horizontal layout and elongated proportions, and the handles are located on the side ends of the body and are actually its continuation. Another option is a round handle shape with a flat cut on one edge for added retention. There are other, more specific options. However, anyway, "ovals" are rarely used, mainly among designer-level taps, and the role of this form is more aesthetic than practical.

The functions of a mixer mainly consist of design features, among which are the presence of a check valve, a pop-up waste, cold start, LED lighting, a temperature control lever, a display, auto-drain (hygienic rinse), a switch for washing machine/dishwasher, and a shelf for accessories. More details:

— Check valve. A check valve prevents water from moving backward through the mixer, for example, when there is a significant pressure difference between hot and cold water. This feature is relevant for those planning to install water meters: the presence of check valves on mixers is often a mandatory condition for installation requests, as such valves prevent meters from running backward. Additionally, it's worth noting the presence of a check valve in the mixer (especially single-lever ones, see "Mixer Type") if your home's water supply is prone to interruptions — such mixers perform much better during pressure surges in the plumbing.

— Pop-up waste. A device that allows you to close the drain hole in a sink, kitchen sink, or bidet (depending on the purpose of the mixer). It comes in two types:

— Lever pop-up waste. This type of valve is operated by a small...lever located behind the mixer, to the side, or at the front of the body. Raising and lowering it opens and closes the sink's drain plug.

— Push-button pop-up waste. Valves of this type are locked and unlocked by pressing the drain hole plug, which requires wetting your hand.

— Cold start. A feature found exclusively in single-lever models. The general principle of "cold start" is as follows: if you open the mixer with the joystick in the central (default) position, only cold water will flow out, not mixed warm water (as in more traditional single-lever devices). To add hot water and increase the temperature, you need to move the lever from the default position. This operation format can provide noticeable savings: by default, cold water flows from the mixer, and hot water is added only as needed.

— LED lighting. A lighting system based on LEDs — an efficient and economical light source. The purpose and functionality of such lighting can vary. In some models, it is installed on the spout and directed downward, allowing you to see the space under the mixer well even in low external lighting. Sometimes this lighting also illuminates the water stream, giving it an unusual appearance. There are also quite original systems — for example, with a transparent spout and LEDs at its base, creating the effect of a mixer glowing from within; in some models, the lighting even changes color depending on the water temperature. However, in any case, this feature significantly affects the cost, so it is mainly characteristic of premium-class products.

— Auto-drain (hygienic rinse). This system is equipped in mixers with additional electronics — mainly contactless models, as well as products with a thermostat or button activation. Auto-drain works as follows: at certain intervals (for example, once every 12 hours or once a day), the automation briefly turns on the water. This washes out harmful bacteria that tend to multiply on the internal surfaces of the spout and in the "stagnant" water inside the mixer. At the same time, the water consumption for hygienic rinsing is small, usually almost unnoticeable against the background of overall consumption.

— Temperature control lever. A feature found in mixers whose design initially does not include a temperature regulator — primarily contactless models, as well as products with one main lever or button activation (see "Mixer Type"). As the name suggests, the temperature control lever allows you to use such a mixer not only for controlling the flow but also for changing the water temperature.

— Display. Mixers that display the temperature and/or current water consumption. The display provides a clear visualization of settings and allows you to see what water and in what volume is flowing from the tap. However, the presence of a screen significantly affects the cost of the mixer.

— Switch for washing machine/dishwasher. A feature that can significantly simplify the connection of a washing machine or dishwasher to the water supply system. Mixers with a switch for a washing machine/dishwasher have a separate pipe for connecting the machine, as well as a switch that allows you to open and close the water supply to this pipe. Thus, to connect a washing machine or dishwasher, there is no need to install additional bushings, splitters, etc. — just connect the device to the existing outlet. And you can control the water supply directly from the mixer body, without having to crawl under the sink or into another hard-to-reach place.

— Shelf for accessories. Most often, the role of such a shelf is played by the upper part of the body, specially made flat. This feature is mainly found in mixers for baths and/or showers (see "Purpose"): it is convenient to keep shampoos, gels, soap, and other cosmetic/hygienic products on the shelf.

Note that this feature is rare — mainly in high-end mixers (in particular, thermostatic ones) that initially have large body sizes. In more traditional models, there is no point in providing this design element — it is more reasonable to purchase a shelf as a separate accessory for the bathroom.

The distance from the extreme front to the extreme back of the tap determines the installation possibilities of the device. In comparison with the depth of the jet, it gives much more visual data precisely on the dimensions of the entire tap, especially for models where there is either no spout (built-in models) or the spout is not the longest part of the set (vertical taps).

Country of origin of the brand under which the tap is marketed. Usually, it is indicated by the "homeland" of the manufacturing company or by the location of its headquarters. The brands under which modern mixers are produced come mainly from the following countries (in alphabetical order): Austria, Belgium, Germany, India, Spain, Italy, China, Poland, Russia, Turkey, Czech Republic, Finland, France, Sweden.

There are many stereotypes associated with the “nationality” of brands and products, but most of them have no basis nowadays. First, the actual place of production is often different from the brand's country of origin. Secondly, the quality of the goods depends not so much on geography, but on the policy of a particular company and how carefully this very quality is controlled in it. Therefore, you should pay attention to the country of origin of the brand only if you fundamentally want or (do not want) to support a manufacturer from a certain state. Quality is best judged by the reputation of a particular...brand and the overall price category of the tap.