USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Kitchen Sinks & Accessories   /   Kitchen Sinks

Comparison Blanco Lemis 6-IF 525108 615x500 vs Blanco Dana IF 514646 575х505

Add to comparison
Blanco Lemis 6-IF 525108 615x500
Blanco Dana IF 514646 575х505
Blanco Lemis 6-IF 525108 615x500Blanco Dana IF 514646 575х505
Outdated Product
from $322.56
Outdated Product
TOP sellers
Mount type
mortise overhead
mortise back-to-back
mortise overhead
mortise back-to-back
Materialstainless steelstainless steel
Shaperectangularrectangular
Working surface
Overflow
Tap hole
General
Surface type
glossy
glossy
Minimum cabinet width (base)650 mm600 mm
Working surface size615x500 mm575х505 mm
Mortise hole size (overhead)595х480 mm557x487 mm
Mortise hole size (back-to-back)617x502 mm557x487 mm
Main bowl size (LxWxD)538x350x190 mm480x340x150 mm
Country of originGermany
Manufacturer's warranty5 years
Color
Added to E-Catalogmarch 2019march 2012

Overflow

Overflow has the form of an opening located at the top of the bowl; this opening must be connected to the drain by a hose. Such a device avoids the transfusion of water over the edge of the sink: when the bowl overflows, water will flow into the sewer through the overflow and will not rise above the edges.

Tap hole

Availability of space in the sink for the installation of the mixer. This hole can be cut in advance or, if necessary, knocked out during installation (the corresponding place on the model already exists and is made of a softer material).

Minimum cabinet width (base)

The smallest width of the cabinet, pedestal or other base required for the installation of the sink. By width in this case means the distance between the side walls of the cabinet (base). If the width of the sink is too small, it will not get the necessary support, and its normal use will be impossible.
Main minimum dimensions: >less than 45 cm, 45 cm, 50 cm, 60 cm, 80 cm, more than 80 cm.

Country of origin

There are many national stereotypes: some countries seem more attractive to many users than others. However, in our time these stereotypes are practically grounded. First, in the country of origin of the brand, often only the headquarters of the manufacturer, and the production may be located in another State. Second, the origin from a certain country is not a guarantee of quality: everything depends on how carefully a manufacturer controls its products. Therefore, to assess the quality should be guided not by «nationality», but primarily by the reputation of a particular brand and price category of the product. Among the countries represented are: Germany, Italy, Poland, Romania, Serbia, list", > 3653/href/list."/list/53/pr-36269/">Switzerland, Japan.

Manufacturer's warranty

The warranty period declared by the manufacturer for this model is the period during which the manufacturer guarantees normal operation. The specific terms of the warranty may vary, however, as a rule, it covers factory defects and malfunctions caused by the fault of the manufacturer/seller and discovered during normal use, without violating the rules.

The longer the warranty period (mostly there are models with a guarantee for 5 years, 10 years, 15 years or even with a lifetime warranty) - the more reliable the sink is, the higher its overall quality, all other things being equal, but the more expensive it will cost in comparison with analogues.

However, depending on the market (country in which it is sold), the warranty for the model may differ. For example, for the countries of the European Union, America and other advanced states, the guarantee can be increased.
Blanco Lemis 6-IF 525108 often compared
Blanco Dana IF 514646 often compared