USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Kitchen Sinks & Accessories   /   Kitchen Sinks

Comparison Franke Sirius SID 611-62 Slim 114.0497.937 620x435 vs Franke Sirius SID 611-78 114.0184.163 780x500

Add to comparison
Franke Sirius SID 611-62 Slim 114.0497.937 620x435
Franke Sirius SID 611-78 114.0184.163 780x500
Franke Sirius SID 611-62 Slim 114.0497.937 620x435Franke Sirius SID 611-78 114.0184.163 780x500
from $119.96 up to $135.96
Outdated Product
from $448.25 
Outdated Product
TOP sellers
Mount type
mortise overhead
mortise overhead
Materialengineered stoneengineered stone
Shaperectangularrectangular
Working surface
Bowl locationreversiblereversible
Dish drying (wing)
Dish drying drain
Overflow
Tap hole
Tap hole diameter35 mm35 mm
In box
 
automatic valve
General
Minimum cabinet width (base)450 mm450 mm
Working surface size620x435 mm780x500 mm
Mortise hole size (overhead)760x480 mm
Main bowl size (LxWxD)354x376x200 mm350x400x200 mm
Country of originSwitzerlandSwitzerland
Manufacturer's warranty10 years
Color
Added to E-Catalogmarch 2017august 2012

Dish drying drain

Additional drain hole on the wing for drying the dishes (cf. relevant paragraph). Drain on drying dishes increases the efficiency of removing moisture from the wing and reduces the likelihood that water will get outside the sink.

Overflow

Overflow has the form of an opening located at the top of the bowl; this opening must be connected to the drain by a hose. Such a device avoids the transfusion of water over the edge of the sink: when the bowl overflows, water will flow into the sewer through the overflow and will not rise above the edges.

In box

Tap. The presence of a tap in the kit will eliminate the search for a suitable style. On the one hand, a tap in a set simplifies the purchase of a sink, but on the other hand, it often introduces certain restrictions. Thus, taps come in different designs and capabilities, as a result of which a complete solution may not satisfy user needs. We also note that this paragraph indicates only those taps that are officially presented in the portfolio of a particular manufacturer of kitchen sinks. Such sets can be assembled within one line or without being tied to a specific series, but purely according to style.

Colander. The colander supplied with the sink is usually a mesh or hole bottom tray through which water can freely pass. Such a tray can be used in the same way as a common colander - for washing cereals and ready-made pasta, for washing and drying fruit, vegetables and greenery, etc.

Cutting board. Availability of cutting board in the product delivery kit. Such a board, when used, is usually attached directly to the sink; this may be especially relevant in cramped conditions where there is not much space on the kitchen table.

Automatic valve. Device that facilitates filling the sink with water and draining this water. It consists of the valve itself, which closes the drain opening, and an exit button or lever..., which is installed in a convenient place - for example, near the mixer. To drain water, it is enough to press a button or lever, opening the valve - it is much more convenient and comfortable than to lower your hand in the water and reach the drain hole.

Mesh on bowl. Mesh made of durable wire mounted over the bowl; can be made removable or foldable. This device is mainly used as a dishwasher; it can be especially useful if the kitchen does not have space for a separate dryer, or if you periodically have to deal with a large number of dishes for which a separate dryer is no longer enough.

Detergent dispenser. Availability of a dispenser for liquid detergents. This device looks like a container with a characteristic cap and a long spout: when you press the cap, a portion of the contents is delivered through this spout. The size of each portion is very small - by pressing the required number of times, you can quite accurately dose the amount of detergent. Dispensers of this design save space in the kitchen, since most of their body is located under the sink. This affects not only the ease of use of detergents, but also the aesthetic design of the kitchen interior.

Siphon. The presence of a siphon supply kit is a characteristic curved tube for connecting a sink drain to a sewer. The complete siphon is by definition optimally compatible with the «native» wash; it saves you the hassle of searching and selecting.

Manufacturer's warranty

The warranty period declared by the manufacturer for this model is the period during which the manufacturer guarantees normal operation. The specific terms of the warranty may vary, however, as a rule, it covers factory defects and malfunctions caused by the fault of the manufacturer/seller and discovered during normal use, without violating the rules.

The longer the warranty period (mostly there are models with a guarantee for 5 years, 10 years, 15 years or even with a lifetime warranty) - the more reliable the sink is, the higher its overall quality, all other things being equal, but the more expensive it will cost in comparison with analogues.

However, depending on the market (country in which it is sold), the warranty for the model may differ. For example, for the countries of the European Union, America and other advanced states, the guarantee can be increased.
Franke Sirius SID 611-62 Slim 114.0497.937 often compared
Franke Sirius SID 611-78 114.0184.163 often compared