USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Bathroom & Shower   /   Bathroom Sinks

Comparison Olympia Consolle Federica 8140 920 mm vs Hatria Sophie YU90 1050 mm

Add to comparison
Olympia Consolle Federica 8140 920 mm
Hatria Sophie YU90 1050 mm
Olympia Consolle Federica 8140 920 mmHatria Sophie YU90 1050 mm
from $216.00
Outdated Product
from $232.00
Outdated Product
TOP sellers
Mount type
suspended
 
suspended
overlay on tabletop
Washbasin materialceramics (subtype unspecified)ceramics (subtype unspecified)
Shaperectangular with arcrectangular with arc
Specs
Bowl locationcentrecentre
Wing
Overflow
Tap hole
General
Dimensions (WxDxH)920х540х200 mm1050х495x200 mm
Color
Added to E-Catalogmay 2014november 2013

Mount type

Suspended. Washbasins designed to be fixed to the wall. These models take up a minimum of space, but are quite difficult to install, because they require the installation on the wall of the corresponding attachments. It is very difficult to install. In addition, in most hanging washbasins, drain pipes (and sometimes eyeliner) often remain visible, which is not very aesthetic. You have to either put up with this, or go to certain devices (for example, independently build a bedside table to cover the pipes). At the same time, there are varieties devoid of this defect. These models are equipped either with a half pedestal (cf. «Complete»), or a full pedestal for installation on the floor. However, in the latter case still require a wall mount for stability, and therefore they are not attributed to the following floor.

Vessel on stand. Washbasins designed for installation on a specially adapted pedestal. Somewhat easier to install than hanging ones, as they do not require brackets or other attachments - it is enough to put the sink on the cabinet and bring communication. In addition, drain and other pipes during installation are hidden in the cabinet, which provides a neat appearance, and the cabinet itself can play the role of locker. On the other hand, the need to search and select the cabinets creates additional hassle, such washbasins take more space than the hangin...g, and features of the design somewhat limit the variety of forms.

Vessel on tabletop. Type of overhead washbasins designed for installation on the countertop. In many ways similar to the overhead models designed for cabinets (see above), but much easier to install: in this case, no specialized pedestal is required, any horizontal surface with a hole under the drain is suitable. This makes it much easier to choose a stand for this type of washstand, and they can have almost any shape.

Mortise in tabletop. Washbasins designed for integration into a flat surface. They look quite elegant and take up a little space, in addition leave the user with the option: the sink can be built into the top surface of a special cabinet, and in the simplest shelf. In the first case, you can hide inside the communication, and the second option provides maximum free space. At the same time, this type requires both a suitable surface (cabinet or shelf) and a hole in it in the shape of a shell - with a certain skill it is possible to make it yourself, but it is better to contact a specialist.

Mortise under tabletop. A variety of mortise washbasins (see above), in which the upper edge of the sink during installation is located not above, but below the countertop. This moment does not play a special role (except that it is somewhat easier to clean up water spilled on the countertop — it is enough to “drive” it with a rag to the edge of the sink), in terms of its main features, this variety is completely similar to the previous one.

On washing machine. Washbasins designed to be fitted with a washing machine under the sink. This option is convenient primarily because it allows you to optimally use the space in the room. At the same time, it should be borne in mind that modern «washers» can differ markedly in size, and before buying it will not hurt to clarify the compatibility of the washbasin with a particular machine; and if the machine has a vertical load, this option is not applicable at all. The nuances of the installation in different models of such washbasins may differ, but most often the sink is attached to the wall, and the washing machine is supported only partially (although the role of the main support is still played by the «washer»).

— Floor. In full accordance with the name of such washbasins are integral structures of bowls and cabinets designed for installation on the floor. Their main difference from the suspended models with a bedside table (see above) is that they are able to stand steadily on a flat floor without any additional attachments. Due to this, the floor model can be, metaphorically speaking, installed even in the middle of the bath (the main thing - to deal with the supply of pipes). Accordingly, this type is the easiest to install. However, the floor models are quite expensive.

There are washbasins designed for several installation options - for example, models with the possibility of applying both to the stand and to the table top.
Hatria Sophie YU90 often compared