Comparison Zoom H4n Pro vs Zoom H6

— SD. One of the formats used in audio, video, computer technology, etc.; Almost every modern laptop has an SD card reader. However, the dimensions of such cards (32x24 mm) are relatively large for portable equipment, and therefore they are used relatively rarely in voice recorders. And they are often represented by more modern SDHC or SDXC cards with increased memory capacity and support for the high-speed UHS bus. Accordingly, SDXC support guarantees comfortable work with SDHC and SD, and SDHC support will not fail when connecting SD cards.

— miniSD. A slightly reduced (up to 22x20 mm) variation of the SD standard, otherwise completely identical to it (up to compatibility with SD-card readers when using simple adapters). It is rare due to the widespread use of even smaller microSDs.

— microSD. The most compact version of SD memory cards to date, have a size of 15x11 mm and a capacity of up to 4 GB. Due to their small size, they are widely used in portable electronics: in fact, they are the standard for mobile phones, and are also widely used in voice recorders. Like miniSD, they can be read by original SD card readers using an adapter.

— microSD HC. The second generation of the microSD standard; characterized by increased capacity, reaching 32 GB. In a voice recorder (and in general any card reader), ordinary microSD cards can also be used for microSD HC cards, but it is impossible to do the opposite — the card will not be read.

...— CompactFlash (hereinafter referred to as CF). One of the first memory card standards, it is still used due to its decent data transfer speed and impressive volumes (up to 128 GB). However, the dimensions of these cards are no less impressive — 42x36 mm. As a result, they are poorly suited for pocket format equipment and are rarely used in voice recorders — mainly in advanced models, where the priority is functionality and recording quality, rather than compactness. If the recorder is designed for CF Type II cards, it can work with all types of CF, and devices under Type I are only compatible with this type.

— memorystick. A proprietary standard developed by Sony and used primarily in its devices. It has a number of variations that differ in dimensions, volume and compatibility, and therefore, when buying a card for such a voice recorder, it is worth clarifying the specific MemoryStick specification used. The standard is rather poorly spread: firstly, because of its closeness (that's why, by the way, full compliance with it is guaranteed only in original Sony cards), and secondly, because of the high price of the cards themselves.

xD-Picture. Cards originally made by Olympus and Fujifilm for their digital cameras. The advantages of such cards are high reliability and compactness (20x25 mm), the disadvantages are high cost and relatively small volumes (up to 2 GB). As a result, dictaphones for xD-Picture are very rare.

Separate input for connecting an external microphone. See "Connecting an External Microphone" for details.

The maximum continuous recording time for the voice recorder. It depends primarily on the amount of memory (see "Built-in memory", "Memory card slot"), it is also directly related to the recording quality: the higher the quality, the more space the material occupies and the shorter the maximum recording time. In this regard, manufacturers usually indicate in the specifications the maximum possible recording time, that is, the recording time with minimum quality; with higher quality and time will be less.

— Connecting to a computer. The ability to connect the recorder to a computer, usually via a USB interface. Such a connection can be used to save recorded data on a computer, update the recorder's firmware, and some models allow using them as USB drives and even card readers (if there is a slot for memory cards, see above).

— Smartphone control. The ability to control the device remotely from a mobile device. First of all, the function is necessary for recorders that can be installed out of reach of your hands and any movement, pressing a button on the case can adversely affect the recording. But at the moment some new hit can be written.

— Lock buttons. The lock prevents the voice recorder from reacting to accidental button presses — for example, when carrying in a tight pocket or purse with a lot of things. By turning it on, you don't have to worry that accidental contact will start recording and drain the battery, erase files, etc. This feature is usually turned on and off by a slider, by pressing multiple buttons at the same time, or in some other way that eliminates the possibility of accidentally unlocking.

— MP3 player. The ability to use the recorder as an MP3 player to listen to music. Technically, almost all models with MP3 support have this capability (see “Recording Format”), however, some voice recorders have a separate “Player” pro...gramme mode that makes listening more convenient. Typically, the player function requires a headphone output (see below).

— FM tuner. The tuner allows you to use the player as an FM receiver — in this range today the vast majority of music radio stations broadcast. Some models with a tuner have the function of recording from the air.

— Built-in speaker. On the voice recorder with its own speaker, you can listen to recorded materials without using additional equipment (headphones) or connecting to a computer. It can also be used to play music and FM radio (if available); however, the sound quality of such a speaker is usually not high, and its main purpose is to listen to the actual recordings.

— Headphone output. A connector that allows you to connect headphones to the recorder. Their purpose is generally similar to the built-in speaker (see above), however, the sound quality of even inexpensive headphones is often significantly higher. As a result, it is quite possible to comfortably listen to not only recordings, but also music, radio programs, etc. through headphones. (if available). In addition, headphones are well suited for noisy environments. even open models still provide some sound insulation.

— Li-Ion battery(lithium-ion). The most common type of battery for portable electronics today. Such batteries have good capacity, are not subject to the memory effect (reduction in capacity when charging an under-discharged battery) and are easy to use, because are equipped with their own control circuits. From the point of view of the average consumer, they have practically no disadvantages, because They are associated with specialized maintenance and long-term storage. The fundamental disadvantage of any built-in battery is the impossibility of quick replacement; The only option is to charge the battery, which sometimes takes a significant amount of time.

— Li-Pol battery(lithium polymer). In fact, they are a modified version of lithium-ion batteries (see above). They have the same advantages, in addition, they are more compact (from 1 mm in thickness), which allows them to be used in miniature models. At the same time, lithium polymer batteries do not perform well in the cold.

— AA battery(or several batteries). Powered by a regular AA battery(s), commonly known as “finger-type” batteries. The advantage of such power supply is the ability to quickly replace a “dead” battery: if you have a spare one, this operation is performed in a few seconds, and buying additional batteries in reserve is usually not a problem - they are sold everywhere. The main disadvantag...e is the need for financial expenses to purchase batteries, while high-capacity ones are expensive, and cheap ones quickly run out. On the other hand, there are rechargeable batteries in the form of AA batteries; If the voice recorder is used frequently and a lot, the purchase of such batteries may well pay off.

— AAA battery (or several batteries). Powered by a battery or AAA batteries, commonly called “pinky”. They are smaller in size than “finger” AA (see above), making them better suited for portable equipment, incl. voice recorders, otherwise completely similar.

— Coin-cell battery. Powered by a replaceable compact battery shaped like a tablet or button. Such batteries are the smallest option available today, which makes it easier to create compact devices for them. In general, they are similar to AA and AAA (see above), but they have a number of differences, except for the actual form. In particular, there is no single standard for “button” batteries - there are a great variety of them, in different sizes and voltages, which can cause difficulties when finding a replacement for a “dead” battery. In addition, they are much less common.