USA
Catalog   /   Automotive   /   Car Audio   /   Car Speakers

Comparison Mystery MC-6943 vs Mystery MC-6944

Add to comparison
Mystery MC-6943
Mystery MC-6944
Mystery MC-6943Mystery MC-6944
from $31.89 up to $34.44
Outdated Product
from $29.92 up to $35.28
Outdated Product
TOP sellers
Application areacarcar
Typecoaxialcoaxial
Size6x9" (15x23 cm)6x9" (15x23 cm)
Number of bands34
Specs
Rated power80 W100 W
Max. power280 W300 W
Frequency range45 – 21000 Hz45 – 22000 Hz
Impedance4 Ohm4 Ohm
Sensitivity92 dB93 dB
Size
Tweeter diameter13 mm13 mm
Midrange speaker diameter64 mm64 mm
Added to E-Catalogjune 2012june 2012

Number of bands

The number of separate frequency ranges into which the total frequency range reproduced by the speaker is divided. In this case, a separate speaker (or even several) is allocated for each range (band). the optimal speaker parameters for each band are different. Therefore, multi-band speakers are considered to provide better sound quality than full-range speakers. In modern multi-band car audio, 2(HF / LF) or 3(HF / MF / LF) bands are usually provided.

Rated power

Rated power of the speaker system. Most often, the average (rms) sound power is indicated as the nominal one.

The most obvious point associated with this characteristic is sound volume: the more powerful the sound system, the louder the sound it can produce, all other things being equal. In addition, compatibility with an external amplifier depends on this indicator: its power should not exceed the power of the sound system, otherwise overloads and damage to the speakers are possible.

Max. power

The maximum power of a short-term (up to several seconds) incoming signal that the speaker can withstand without physical damage. Just like the nominal power, it matters for the selection of acoustics for an amplifier (or vice versa): it is believed that the maximum power of the speakers should be at least 2 times higher than the maximum power of the signal source.

Frequency range

The total audio frequency range reproduced by all speaker speakers.

Obviously, this range should not be too narrow, so that the acoustics do not cut off the lower and/or upper frequency limits of the reproduced sound. At the same time, the human ear perceives sound within 16 Hz - 22 kHz, and it simply does not make sense to provide speakers with a wider frequency range. We also recall that in mid-frequency acoustics and tweeters, reproducible frequencies are limited due to specialization (for more details, see "Type"). And the overall sound quality will depend not only on this indicator, but also on a number of other features.

Sensitivity

This parameter determines the volume of the sound of a particular speaker when a certain standard signal is fed to it. Typically, this is considered a 1 W signal with a frequency of 1000 Hz. The higher the sensitivity, the less the speaker is demanding on the power of the amplifier. So, it is believed that for acoustics connected directly to the car radio, the sensitivity should be 80 dB or more; for less sensitive systems it is recommended to use a separate amplifier.
Mystery MC-6943 often compared
Mystery MC-6944 often compared