USA
Catalog   /   Watches, Jewelry & Accessories   /   Vaping & hookahs   /   Electronic Cigarettes

Comparison Eleaf iStick Pico 75W Battery vs Eleaf iStick Pico Kit

Add to comparison
Eleaf iStick Pico 75W Battery
Eleaf iStick Pico Kit
Eleaf iStick Pico 75W BatteryEleaf iStick Pico Kit
from $43.32 up to $51.96
Outdated Product
from $27.03 up to $58.20
Outdated Product
TOP sellers
Main
Thermal control and wattage function.
Typebattery modgPS tracker
Battery modelectronicelectronic
Board featuresvariwatt + temp controlvariwatt + temp control
Firmware update
Atomizer
Type of atomizerdisposable
Liquid tank capacity2 mL
Refilling typetop
Airflow typebottom
Minimum resistance0.1 Ohm0.1 Ohm
Maximum resistance3.5 Ohm3.5 Ohm
Connector510510
Battery
Battery1х186501х18650
Power75 W75 W
Minimum voltage0.5 V
Maximum voltage9 V
Removable
Charging via microUSB
General specs
Display
Materialstainless steelstainless steel
Tank materialglass
Size23х45хх71 mm45х23х71 mm
Weight159 g90 g
Color
Added to E-Catalognovember 2016november 2016

Type

Starter kit. A set also known as a “kit” or “box mod”. It includes everything you need for vaping — both a battery mod and an atomizer; in other words, a “kit” is a ready-to-use electronic cigarette (except that in some models the battery has to be purchased separately). At the same time, this category includes both relatively inexpensive and simple devices and high-end models. In any case, starter kits will be appreciated by tech who do not want to select a battery mod and atomizer separately and would like to immediately receive a device whose components are optimally compatible with each other.

POD system. A specific type of electronic cigarette that uses replaceable cartridges — “pods” — instead of traditional atomizers. Each cartridge consists of an evaporator and a container with liquid; the “pod” can be either open (with the ability to refill at your discretion) or closed (disposable, supplied filled and thrown away when the liquid supply is exhausted). In any case, POD systems are usually sold as ready-made kits, which have a number of advantages over traditional vapes. Firstly, cartridges are relatively inexpensive and take up very little space; as a result, you can carry several “pods” with different flavors and/or strengths at once, changing them in a battery mod as desired. Secondly, the battery mods themselves...are more compact and lighter than in regular electronic cigarettes, they are more convenient to carry and do not attract as much attention. Thirdly, POD systems are extremely easy to maintain - in fact, there is no point in making replaceable cassettes serviceable. Among the disadvantages of such devices, one can note the relatively small capacity of batteries and reservoirs in cassettes, although there are exceptions.

Disposable. Disposable POD systems are vaping devices without the ability to fill liquid and recharge the battery. The liquid reservoir in their design has a certain volume, and a specific battery capacity is selected for it (based on the specified number of puffs). When the “disposable” runs out of vaping liquid or the battery runs out, the device can be thrown away. Due to their compact size, disposable electronic cigarettes easily fit into a pocket, a small compartment of a bag or backpack. Also, they often lack controls and settings - the heating element is activated as soon as the customer takes a puff. In terms of flavor, there are many different options for disposable POD systems on the shelves.

— Atomizer. A separately sold vaporizer of an electronic cigarette — that is, the part where the vapor is generated; for operation, the vaporizer is installed on a battery mod (see below). Some types of such devices are also called "clearomizers", but this term is used less and less often; nowadays, all vaporizers are usually united under the term "atomizer". Be that as it may, the overall impressions of the vape are mainly influenced by the characteristics of the vaporizer: in particular, the taste and richness of the vapor, as well as the ability to customize the vapor to your preferences, directly depend on them. So in order to change the sensations of vaping, it is enough to try a different atomizer. In addition, when buying a new vape, many users (especially experienced ones) prefer not to rely on ready-made starter kits, but to choose an atomizer and a battery mod separately, at their discretion.

— Battery mod. The part of the electronic cigarette responsible for powering the evaporator (atomizer). The functionality of such a mod can be different - from the simplest container for a replaceable battery with an on/off button to an advanced device with complex control electronics and advanced capabilities (see "Battery mod"). Be that as it may, separately sold battery mods are designed for tech who want to assemble an electronic cigarette according to individual requirements, without relying on the starter kits.

Type of atomizer

Unattended. Maintenance-free called atomizers-tanks (with a container for liquid), in which, in principle, it is impossible to replace the factory heater (spiral and wick) with its own winding. Thus, when using such an evaporator, you will have to periodically (most likely once every 2-3 weeks) change the “heads” (heaters). Maintenance-free vapers are a good option for those who are just about to try vaping, as well as for experienced vapers who don't want to mess around with custom coils. Their main disadvantage is the inability to adjust the atomizer to your own preferences — you have to make do with what the manufacturer originally provided for in the design.

— Serviced. Tank atomizers (with a container for liquid), in the design of which the manufacturer initially provides for the possibility of replacing the heating element (coil and wick) by the user. This is more difficult than changing the whole “head”, as in a maintenance-free atomizer; but winding can be done according to your own preferences, without relying on a factory design, and consumables for winding are cheaper than whole heads. On the other hand, the possibility of replacing the entire “head” in such models is most often not provided for — the only option is manual winding. In light of all this, serviceable atomizers will be a good choice, especially for experienced vapers who want to have the maximum opportunity to personaliz...e their electronic cigarette.

— Semi-maintenance. Tank atomizers (with a liquid container) that combine the capabilities of serviced and non-serviced models. In such a “tank” it is possible to install both unattended “heads”, which are completely replaceable, and serviced heaters, which can be rewound by the user himself. Thus, the vaper can choose the option of his choice: either use simple and convenient interchangeable “heads”, or spend a little time and effort, but wind the coil according to his own preferences. On the other hand, most users do not need such versatility, so relatively few atomizers of this type are produced.

— Drip atomizer (RDA). A distinctive feature of this type of atomizer is the absence of a liquid container: before each vaping session, the wick must be moistened directly from the bottle with a few drops of liquid (hence the name drip). This is not as convenient as having a tank with a supply of liquid for several sessions on hand — in particular, also because it is not easy to control the remaining liquid in the drip. On the other hand, this option has an important advantage: due to the excellent blowing of the heating elements, the “drips” give a very plentiful and saturated steam, in this indicator they are noticeably superior to the tanks. And so that such an atomizer does not have to be frequently refilled manually, manufacturers can provide various tricks — for example, in the so-called "squonkers" have a tank installed in the battery pack, and from this tank, by pressing the "feed" button, the evaporator wick is fed.

— Bacodripka (RDTA). Combined devices, in accordance with the name, combining both a tank and a drip. From the first variety of RDTA, they took a tank for themselves, which allows them to keep a supply of liquid on hand for several soaring sessions, from the second — a heater design that provides abundant and intense steam. Thus, such atomizers combine the advantages of both types. On the other hand, baco drips are expensive, have a very high fluid consumption, and are often difficult to maintain: in many models, cotton wool plays the role of a wick, which must be laid in a special way when replacing — otherwise leakage or burning is possible.

Genesis. A specific type of atomizer tanks, usually serviced (see above). The key difference between the Geneses is the design of the wick: it is a fine stainless steel mesh wrapped with a heater coil. This gives a number of advantages compared to the classical design, where the wick is made of cotton wool, vegetable fibers, etc. Taste is considered the main of these advantages: genesis does not give a burnt aftertaste and provides almost perfect steam purity. In addition, such "heads" can serve without replacement for a very long time (several months), and the replacement of the wick and the heater is quite easy and fast. The main disadvantage of this type of atomizers is their rather high cost. Separately, we note that the installation of a metal wick in a classic evaporator does not turn it into a genesis — the design of the atomizer must be initially optimized for the grid.

Liquid tank capacity

The volume of the liquid tank provided in the design of the atomizer. Note that this parameter can be specified even for squonk atomizers (see "Filling type"): although they work with an external tank, however, a certain amount of "liquid" can fit in the evaporator itself.

The larger the tank, the more liquid you can keep in an electronic cigarette and the less often you have to refill it. On the other hand, capacious tanks have the appropriate dimensions, and too large a tank would be inconvenient, and liquids are consumed relatively little even in one long session of soaring. As a result, a volume of more than 6 mL is already considered quite large for vapes, and in the smallest models this figure does not exceed 2 mL.

Also note that when choosing a tank capacity, manufacturers usually take into account the resistance of the spiral, the power of the battery (if it is included) and other parameters that affect the expected flow rate of the liquid. There is no hard dependency here, however, in general, more powerful atomizers are usually equipped with larger tanks.

Refilling type

Upper. The traditional type of filling was initially quite popular, but now such atomizers are gradually giving way to bottom filling models. The main advantage of this option is the ability to pour liquid without turning the atomizer over and without removing the flask from the battery mod. However refilling usually requires disassembly — for example, unscrewing the cap with the mouthpiece.

Lower. This option assumes that for refueling, you need to turn the atomizer upside down and pour liquid from the bottom side. At first glance, this procedure is less convenient than top filling, but it provides an important advantage for serviced heaters: if necessary, you can remove and rewind the base without draining the liquid from the tank. Note that squonk format drip atomizers are formally also refueled from below, however, they have their own specifics, therefore they do not belong to this category and are allocated separately; see below for details.

Side. Refueling through a special hole in the side of the atomizer. Like the top one, this design allows you not to remove the flask from the battery mod; the opening usually opens and closes easily and quickly, without the need, for example, to unscrew the cap. This option is quite popular in baco drips (see "Type of atomizer"), althou...gh it is also found in other varieties.

— Squonk. A specific type of bottom filling used in models with drip atomizers (see "Type of atomizer"). These vapes have a rather large e-liquid reservoir installed in the battery mod, and each time you press a special button (or the elastic wall of the reservoir), the liquid is fed into the atomizer in small portions directly through the connector. This design eliminates the main drawback of drip atomizers — the need to constantly add liquid manually, "drop by drop": instead of the hassle of manual refueling, it is enough to periodically press the button. At the same time, most of these evaporators allow installation on a regular battery mod, without a squonk — for this, the kit provides a replaceable connector of a standard design, without a channel for supplying liquid; and on battery mods with a squonk, usually, you can put ordinary atomizers without restrictions. The disadvantages of this option can be somewhat higher cost than analogues with traditional types of refueling.

Airflow type

The type of blowing provided in the atomizer of an electronic cigarette.

This parameter is indicated by the location of the cells for the intake of air entering the evaporator. According to this criterion, lower, upper and side airflow are distinguished, here are their main features:

— Lower. The most popular option nowadays. Such popularity is primarily due to the fact that many vapers consider the “lower” vapor to be the most delicious. In addition, bottom blown atomizers are easier to maintain than "side" models, they are not so demanding on winding quality. The disadvantages of this option include an increased likelihood of leakage, including during liquid overflow; and the condensate, which is quite intensively formed at the air intakes, tends to flow down onto the battery mod. However, these points are not particularly critical.

— Upper. A format that has appeared relatively recently. In general, such an airflow conveys taste somewhat worse than the lower one, moreover, the steam turns out to be hotter; however, this point is largely subjective, and some users like this type of steam. The objective advantages of the “upper” atomizers include the minimum probability of overflow, the almost complete absence of condensate flowing onto the battery mod, and the absence of splashes even when using coils with very low resistance.

— Si...de. The type of blowing used mainly in "drips" (see "Type of atomizer"). If the bottom airflow gives the most delicious steam, then the side airflow is the most dense and saturated. This is achieved due to the fact that the air flows around the spiral as intensively as possible and captures the greatest amount of evaporation. In addition, the likelihood of liquid overflow and splash formation in such atomizers is very small, and with the right settings, the taste is transmitted almost as well as in the “lower” models. The main disadvantage of this option is the actual need for careful tuning and proper installation of the spiral — so that there are no blind spots on it. So side airflow is generally designed for experienced users; maintenance-free atomizers are an exception, but this format of operation is rarely used in them.

Also note that there are combined options for sale, for which two types of airflow are indicated at once. Here the specifics can be different. So, it is unrealistic to combine the upper and lower airflow in one evaporator, therefore this option is indicated only for sets of several atomizers with different types of airflow. But the side format of work may well be combined with the top or bottom — this allows you to combine the advantages of both options and provide saturated steam. On the other hand, the need for careful tuning for such devices is just as relevant as for "pure" side ones.

Minimum voltage

The lowest voltage that the battery mod can supply to the atomizer.

The meaning of this parameter depends on the type of battery mod and the functions of the board (see above). So, in mechanical and simple electronic modes, the smallest value to which the battery voltage can drop before it turns off and requires charging is usually indicated here. Knowing this parameter, as well as the resistance of the atomizer, you can calculate the minimum guaranteed vaping power.

If we are talking about a mod with adjustments like varivolt or variwatt, then the minimum voltage is also the lowest voltage that can be set manually in the settings. This may be necessary to reduce the power and, accordingly, the intensity of soaring — for example, if the gas station has a very rich taste, and abundant dense steam would be overkill. In adjustable battery packs, the lower the minimum voltage (with the same maximum voltage), the wider the adjustment range, the more options the vaper has to adjust the vaping parameters. See “Maximum voltage".

Maximum voltage

The highest voltage that the battery mod can supply to the atomizer.

Knowing the minimum (see above) and maximum voltage, it is possible to estimate the heating power that the battery is able to provide at a certain resistance of the atomizer. For example, if we have a battery mod with a voltage range of 3.3 – 4.8 V and an atomizer with a 1.8 Ohm coil, then the current strength at the minimum voltage will be 3.3 / 1.8 ≈ 1.8 A, and at maximum 4.8 / 1.8 ≈ 2.7 A. Accordingly, the smallest heating power will be 3.3 * 1.8 ≈ 6 W, and the largest 4.8 * 2.7 ≈ 13 W. In this case, the nominal power of the battery can be higher, but not vice versa — the actual power cannot be more than the nominal. Let's say, theoretically, the battery from our example, combined with a 0.15 Ohm sub-ohm atomizer, even at the minimum voltage, should produce a current of 3.3 / 0.15 = 22 A and a power of 3.3 * 22 = 72.6 W. However, if a power of 50 W is claimed in the characteristics, then higher values \u200b\u200bare impossible to achieve, even if you unscrew the regulator to the maximum — at low resistances, the voltage at the battery output drops sharply.

Tank material

The material from which the flask of the complete atomizer is made. Most often, it means the material from which the transparent insert in the body (usually steel) is made, with the exception of all-steel flasks, see below for more details about them.

Glass. The most popular flask material in modern vapes. The glass does more than just allow you to see the contents of the flask — this transparency is maintained for a long time, as the glass surface is highly resistant to scratches. In addition, the walls of the flask are chemically inert, they do not react with the "slurry", whatever its composition; and the fragility of the walls is compensated by their thickness, and sometimes by special additives in the composition of the glass. This material is somewhat more expensive than plastic, but in fact this difference is insignificant.

— Plastic. Plastic flasks, like glass, are usually made transparent, which allows you to monitor the amount of liquid; at the same time, they are much cheaper, it is very difficult to break such a container, and fragments from plastic are not as dangerous as glass ones. At the same time, this material is easily covered with scratches and quickly becomes cloudy during use. In addition, some types of plastic (especially inexpensive ones) can react with substances that make up e-liquids (manufacturers of both flasks and refills try to avoid this phenomenon, but...a full guarantee cannot be given). As a result, this option is not particularly popular, it is typical mainly for low-cost devices created with the expectation of maximum cost reduction.

— Stainless steel. Stainless steel flasks are notable primarily for their high strength — even under a very strong load, the steel tank is more likely to flatten than crack. Yes, and resistance to corrosion can also be written down as advantages. At the same time, this material has a critical drawback that negates all its advantages — it is opaque. As a result, it is possible to monitor the liquid level in such a flask only by indirect signs — for example, by changing the taste or the amount of steam. This, to put it mildly, is inconvenient, so steel flasks are used extremely rarely — and not so much for practical reasons, but as an element of unusual design.
Eleaf iStick Pico 75W Battery often compared
Eleaf iStick Pico Kit often compared