Comparison Aerocool P7-GC1 AIR RGB vs Dxracer Tank OH/TS29

The highest weight that the chair is guaranteed to withstand with regular use — in other words, the maximum weight of a seated person, allowing you to constantly use the product in normal mode without fear of unexpected breakdown. Note that many models are able to endure short-term excess weight without problems, however, anyway, it is not worth overloading the structure (and even more so doing it all the time): off-design loads will significantly increase its wear, and breakdown can occur at the most unexpected moment.

Высота спинки кресла; для моделей с изменяемой высотой спинки, как правило, указывается максимальное значение.

Высота спинки измеряется от сидения до верхнего края. По сути, это высота опоры, доступной для спины. В некоторых ситуациях на этот показатель можно не обращать особого внимания — например, если кресло предназначается для посетителей и роль спинки в нем чисто символическая. Однако если сидеть в кресле предстоит часто и подолгу — стоит учесть и этот момент. В идеале лучше всего попробовать «вживую» несколько кресел и выяснить, какая высота спинки для вас является наиболее комфортной. Если же такой возможности нет — стоит решить, до какой области на теле должна доставать спинка (до лопаток, до основания шеи и т. п.) и замерить, на какой высоте от сидения находится эта область в сидячем положении. А если вам нужна конкретно опора для затылка — стоит выбирать среди моделей, оснащенных подголовниками.

Спинка считается высокой, если она имеет высоту не менее 65 см. Благодаря таким размерам кресло обеспечивает опору практически на всю спину сидящего человека, а нередко — еще и на затылок. В то же время стоит учитывать, что далеко не всякая высокая спинка является подголовником.

The width of the back at the shoulders of the intended wearer.

In order to recline as much as possible on the back, this width should be no less than the actual width of the user's shoulders. At the same time, for more or less comfortable use, a smaller back size is also sufficient — approximately corresponding to the width of the back in the area of \u200b\u200bthe shoulders (between the outer edges of the shoulder blades). Well, anyway, this parameter is, on the one hand, secondary, and on the other, very subjective. This means that in most cases you can not pay much attention to it, however, if you have already decided to choose the furniture that is the most suitable in size, it is better not to measure your own back, but to test several chairs and determine the most convenient value by experience.

Dimensions of the seat installed in the chair in width and depth (from the back to the front edge). For models with variable depth (see "Adjustments"), the maximum value is taken into account when the seat is pushed forward to the stop.

Most modern chairs are designed for the average adult, so paying attention to size is primarily for people of a large, or, conversely, miniature physique. In width, the average is considered to be 45 – 55 cm, the narrowest models are up to 40 cm wide, in the widest it can exceed 60 cm. Similarly, a depth of less than 40 cm is considered small, up to 60 cm — medium, more than 60 cm — large.

Seat height from the floor. The optimal height for a person of average height is considered to be 40 – 50 cm, however, this moment is largely subjective, and the comfort of the chair for a particular user depends heavily on his preferences and physique. Thus, many models have the ability to change the height in a certain range (see "Adjustments"). To choose, it is best to determine “live” at what height you are comfortable sitting, and find a model with the appropriate characteristics.

The presence of a headrest in the design of the chair.

The role of the headrest can be played as a stand, made separately from the backrest, and the upper part of the backrest — if it has a pronounced characteristic shape or a pillow is supplied in the kit, which can be installed at the request of the user. The simplest high backs that do not have a characteristic upper part are not considered head restraints.

Anyway, this feature provides additional comfort — especially when reclining back. On the other hand, if you have to sit mostly straight in the chair and the back plays a symbolic role, perhaps the best choice would be a model without a headrest(especially since such chairs are cheaper).

The ability to block the rotation of the rollers on which the chair is installed — in order to fix it in one place. Most models with this function are for children(see "Intended use"). This is due to the fact that correct posture is important for the correct development of the child’s spine, one of the factors affecting posture is the distance to the table while writing, and with unfixed wheels, the chair will be able to move back and forth even if the person sitting does not want to. However, there are also "adult" models with fixed rollers.

Multi-coloured RGB lighting system built into the chair. The specific device of such a system may be different: in some models it has the form of luminous lines that highlight the contours of the chair, in others a luminous block is built into the back. As a rule, such a backlight allows you to at least select a color from several available options, however, there are also more advanced features: fine-tuning the hue, smooth color change, pulsation, etc. Be that as it may, this function has an exclusively decorative purpose and is found mostly in advanced gaming chairs.

Removable pillows can be both under the head (with their help, the back bend in the neck area is additionally regulated), and under the back (act as an auxiliary lumbar support). Basically, they come in pairs, but it happens that either a pillow for the head or only for the back is supplied with the chair. As a rule, removable pillows are fixed on the belts.