Comparison Clatronic MA 3585 vs Clatronic AS 2958

The total power consumption of the slicer. The value of this parameter is small — the performance of even the most powerful models usually does not exceed 200 W.

Almost all the power consumed is for operation of the engine, so the higher it is, the more powerful the engine is installed in the slicer. Theoretically, the higher power allows you to better cope with solid and dense products, but in fact everything also depends on the characteristics of the knife — primarily its type (see below) and the quality of sharpening. Therefore, power data are more reference than practically significant, and this indicator has almost no effect on the quality of the slicer.

The diameter of the blade of the knife supplied with the slicer. Knives are shaped like discs — accordingly, the diameter of the blade is actually equal to the diameter of the disc.

The larger the blade, the larger ingredients the device can handle at a time and the “larger” the cut slices can be. At the same time, in fact it is rarely necessary to use a slicer for very thick products. Therefore, even in the most “large-caliber” modern models, the knife diameter usually does not exceed 300 mm.

The ability to adjust the speed at which the slicer blade rotates. This allows you to further adjust the operating mode to the specifics of a particular situation and type of products: for example, the slicer can easily cope with relatively soft and homogeneous ingredients at low speed, but for solid, dense or heterogeneous it is better to use the “fast” mode.

Note that this function, on the one hand, is rarely required in everyday life, on the other hand, it significantly affects the cost of the device. Therefore, the presence of an adjustable speed is typical mainly for advanced slicers.

The presence of protection from accidental activation in the design of the slicer.

One of the most popular options for such protection is the use of two power buttons: in order for the knife to move, you need to hold down both. This format of work minimizes the chance of accidental start — for example, if you touch the button while correcting the cut product in the immediate near the blades. In addition, this function can also play the role of child lock: the buttons are often made quite tight so that only an adult can press them.

The presence of a tray for chopped products in the design or delivery set of the slicer.

Such a pallet can be made both as a non-removable element and as a separate device that is not attached to the slicer body. However, this piece of equipment saves the user from having to look for a board, saucer, plate or other "seat" for chunks coming out from under the knife of the unit anyway. Of course, in a modern kitchen, finding such a “seat” is not a problem, but using a tray is often more convenient.

The ability to fold the slicer when it is not in use.

The meaning of folding in slicers is the same as in any other technique — it allows you to reduce the dimensions of the unit and make it more convenient for storage and moving from place to place. However the folding structure is considered less durable and reliable than the unibody; however, in this case, this difference is not fundamental.

Also note that this category also includes such a specific variety as built-in slicers — without the possibility of folding, such devices would be too bulky and would cause inconvenience when embedded.

The main material used in the construction of the slicer.

— Plastic. This material is characterized by low cost and is often used in inexpensive models. However, its use is not an unambiguous sign that the slicer belongs to the low-cost class. The fact is that although the reliability of plastic is considered relatively low (compared to metal), it is quite sufficient even for fairly powerful models. In addition, there are many varieties of this material on the market, including options with high strength rates. Therefore, the actual strength and reliability of plastic is usually directly dependent on the price category of the slicer.

— Metal. On the practical side, metal is remarkable for its high strength: it is much more difficult to damage such a body than plastic. In addition, it gives the device a solid appearance. The disadvantage of this material is a higher cost — despite the fact that the real need for the mentioned strength indicators is quite rare.