USA
Catalog   /   Sound & Hi-Fi   /   Musical Instruments   /   Pianos & Keyboards   /   Synthesizers

Comparison Casio LK-136 vs Yamaha PSR-F50

Add to comparison
Casio LK-136
Yamaha PSR-F50
Casio LK-136Yamaha PSR-F50
Outdated Product
from $144.00
Outdated Product
TOP sellers
Typesynthesizer (rompler)synthesizer (rompler)
Keys
Number of keys6161
Sizefull sizefull size
Mechanicsactivepassive
Rigidityunweightedunweighted
Backlight
Specs
Polyphony32 voices32 voices
Built-in timbres120 шт120 шт
Auto accompaniment
Accompaniment styles70 шт114 шт
Learning mode
Tempo change40 – 255
Metronome
Built-in compositions
Effects and control
Transposition
Fine tuning
Connectors
Outputs
headphones /combined with linear/
headphones /combined with linear/
Linear outputs11
In box
In box
 
PSU
music stand
 
General
Built-in acoustics4 W
Number of bands1
Displaymonochrome
Power consumption9.5 W6 W
Autonomous power supply
aA batteries /6 pcs/
aA batteries /6 pcs/
Operating hours6 h
Dimensions (WxHxD)946x92x307 mm940x109x306 mm
Weight3.5 kg3.4 kg
Color
Added to E-Catalogoctober 2017october 2016

Mechanics

Type of action used in synthesizer keys.

— Passive. The simplest type of mechanics, when each key is, in fact, a “switch” for its note: it only turns the sound on and off, while the volume of this sound does not depend on the strength and intensity of pressing. Passive keyboards usually have unweighted, less often semi-weighted hardness (see below). Their main and, perhaps, the only advantage is their low cost, due to the simplicity of design. At the same time, the capabilities of such tools are very limited, and even when training, it is recommended to use them only at the very initial stages. As a result, passive mechanics are used exclusively in the simplest low-cost-level synthesizers, which are more suitable for the role of a toy for entertainment, rather than a full-fledged instrument.

— Active. A mechanic that provides a relationship between volume and pressing force: the harder the key is pressed, the louder and sharper the sound will be. Most often combined with semi-weighted, occasionally unweighted hardness (see below). Such keys already make it possible to control the dynamics of each note: select its volume "on the fly", highlight accents, use special techniques, etc. This feature is especially important in training, when you need to train to control the effort on each individual finger. Active mechanics are highly recommended even for an inexpensive synthesizer, and for a mid-range instrument it is almost man...datory, as well as for serious learning. At the same time, many models may provide sensitivity adjustment, or even a complete switch to passive mode (for example, to simulate some instruments).

— Hammerhead. The most advanced kind of mechanics. Like the active one, it provides volume control depending on the force of pressing, but it fundamentally differs in response: hammer action is used only in weighted keyboards (see "Rigidity"), and the feeling when playing it is close to playing on a real piano. The degree of approximation, however, can be different — some models are indistinguishable in sensations from the piano, in others the mechanics are simpler. However, anyway, such features are not cheap, despite the fact that the real need for a "piano" response is extremely rare. As a result, hammer action keyboards are found mainly among top-class instruments, mainly workstations (see "Type") with full-size keyboards for 88 keys.

Backlight

The presence of a backlight in the design of the keyboard.

Usually, in this case, the illumination of each individual key is implied. This function is not of great importance for ordinary music-making, but it can be very relevant when learning: the instrument can highlight the keys that need to be pressed at the moment, simplifying the task for the student. Actually, the presence of a backlight is most often just a sign of the presence of a training mode in the instrument (see below), although not every “training” synthesizer has this function.

Accompaniment styles

The number of auto accompaniment styles (see above) originally provided in the synthesizer, in other words, the number of accompaniment options available to the user.

The more extensive this set, the higher the probability of finding among these melodies suitable options for a particular case. At the same time, the abundance of styles in itself is not yet a 100% guarantee that among them there will be a suitable one, especially since different synthesizer models can differ markedly in a specific set of melodies. So the list does not hurt to clarify before buying. Also note that the situation can be corrected by user styles (see below) — many synthesizers with auto accompaniment support them.

Learning mode

The presence of a learning mode in the design of the synthesizer.

The purpose of this function is clear from the name. It is most often based on the following principle: the synthesizer itself tells the student which keys to press, displaying the keyboard on the display or highlighting the necessary keys using the backlight (if available, see above). Of course, at different levels of learning, the format of such prompts will also be different: for example, at the very beginning, the synthesizer highlights the necessary notes until they are pressed, and at the final stage it highlights them at the tempo at which you need to play the melody, and evaluates the accuracy of the student pressing the desired keys. There are also other features and nuances of learning — for example, the mode of separate learning of parts for the left and right hands, when the instrument itself plays one part and tells the student how to play the second. In addition, a metronome function is practically mandatory for a synthesizer with this mode (see below).

Regardless of the specific functionality, this mode will be very useful for those who are just developing their keyboard playing skills.

Tempo change

The range in which you can change the tempo of the programme played by the synthesizer — auto accompaniment, lesson tune (see above), metronome (see below), recorded sample, etc.

Pace is measured in beats per minute. Changing it allows you to adjust the speed of the synthesizer to the specifics of the situation — for example, slightly slow down the tutorial if it is too hard to master at the initial pace. The wider the range of tempo adjustment, the more options the musician has to choose from, especially in the area of very slow and very fast tempos.

Note that the traditional range of musical tempos covers values from 40 beats / min (“grave”, “very slowly”) to 208 beats / min (“prestissimo”, “very fast”), however, in synthesizers it can be more extensive — for example, 30 – 255 bpm.

Metronome

The presence of a built-in metronome in the design of the synthesizer.

A metronome is a device that produces sharp sound signals (beats) at certain short intervals specified by the user. In music, such a device is used primarily to maintain a given tempo. A metronome can be useful both for a beginner musician, for developing a sense of rhythm, and for a professional, for example, when learning a new melody, especially if it is to be played without accompaniment and you will need to maintain the rhythm yourself. In addition, the sound of the metronome can also be used as an effect in musical compositions.

In box

Additional items supplied with the synthesizer in addition to the instrument itself.

— Music stand. A stand for musical notations, installed in such a way that the materials on it are constantly in front of the musician's eyes. In modern synthesizers, the music stand can be built-in or removable.

— Pedal. An additional control in the form of a pedal, which can be responsible for a wide variety of functions, depending on the model of the synthesizer. For more information about this, see "Connected pedals", here we note that the presence of a pedal in the kit eliminates the need to look for and select it separately.

— Power Supply. Power supply for connecting the synthesizer to the network. The very possibility of working from the outlet is important for most modern synthesizers. Therefore, the absence of a power supply in the kit means either that it is made internal, or that we have a simple and inexpensive model (usually for children, see "Type"), designed mainly for battery operation and not equipped with a PSU or not providing for it at all connections. An external power supply unit is convenient because it can be disconnected when working from autonomous power sources, saving the tool from unnecessary wires.

— Disk. Optical disk (CD or DVD) with various additional materials on the synthesizer. These can be instructions and other documentation, drivers for connecting to a computer, specialized software for editing music on a PC,...etc.

— Rack. Own stand for installing the synthesizer on the floor — usually folding, in the unfolded state resembling the letter X in shape. With such a stand, the musician does not have to look for a free table, window sill or other similar place to place the instrument — there is enough free space on the floor. Racks for synthesizers are also sold separately, but it is often more convenient or even cheaper to buy such a device along with an instrument.

— Microphone. The microphone can be used both for singing and for creating samples based on external sounds. However it is worth noting that usually relatively inexpensive synthesizers for beginner musicians are equipped with microphones — it is more convenient for a professional to independently choose additional equipment (including a microphone) to suit their own needs and preferences, without relying on the choice of the manufacturer. Accordingly, the complete microphones themselves usually have rather modest characteristics.

Built-in acoustics

Rated power of the built-in acoustics of the synthesizer.

This indicator characterizes, first of all, the volume at which the instrument's built-in speakers can sound. At the same time, one should not forget that in most cases such speakers are intended rather for individual use — so that the music can be heard by the musician himself and the people in close proximity to him. With this application, high power is not needed for normal hearing; and if you still need a loud sound, you can connect the instrument to an external speaker.

Therefore, it makes sense to pay attention to the power of the built-in acoustics if the synthesizer is planned to be used for more serious tasks than individual listening, and if external acoustics may not always be available.

Number of bands

The number of bands provided in the synthesizer's built-in speaker system. A band in this case can be called a separate set of speakers responsible for its part of the frequency range. For example, a system with separate bass and treble speakers would be called a two-way system.

The meaning of this division is due to the fact that for different frequencies the requirements for speakers will also be different. Accordingly, the allocation of its own speakers for each frequency band can significantly improve the sound quality. At the same time, it is worth remembering that in synthesizers, the built-in acoustics are not intended for high-quality sound reproduction, but rather to give a general idea of \u200b\u200bwhat the instrument is currently playing. Therefore, even in the most advanced models, more than two bands are not found, and for the entry-level and intermediate level, one is often enough.
Casio LK-136 often compared