USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Kitchen Sinks & Accessories   /   Kitchen Sinks

Comparison Blanco Andano 340/180-IF 518319 585x440 vs Blanco Andano 340/180-U 518317 585x440

Add to comparison
Blanco Andano 340/180-IF 518319 585x440
Blanco Andano 340/180-U 518317 585x440
Blanco Andano 340/180-IF 518319 585x440Blanco Andano 340/180-U 518317 585x440
from $989.68 
Outdated Product
from $372.24 up to $541.44
Outdated Product
TOP sellers
Mount type
mortise overhead
mortise back-to-back
 
 
 
tabletop
Materialstainless steelstainless steel
Shaperectangularrectangular
Working surface
Main bowls11
Bowl locationleft / rightleft / right
Additional bowl
Overflow
In box
automatic valve /P/N 518320, 518324/
automatic valve /P/N 518318, 518322/
General
Surface type
glossy
glossy
Minimum cabinet width (base)600 mm600 mm
Working surface size585x440 mm585x440 mm
Mortise hole size (overhead)565x420 mm
Mortise hole size (countertop)545x400 mm
Main bowl size (LxWxD)340x400x190 mm340x400x190 mm
Additional bowl size (LxWxD)180x400x130 mm180x400x130 mm
Country of originGermanyGermany
Color
Added to E-Catalogdecember 2012december 2012

Mount type

The standard way to mount the sink. Some models allow multiple ways to install, at the user’s choice. The specific options may be:

Mortise overhead. Models fitted in the slot of the worktop in such a way that the side of the sink is significantly above the surface of the worktop. The method of installation is quite simple, but the side raised above the table is in some cases inconvenient.

Mortise back to back. Models installed in the slot of the worktop so that the side of the sink is at the level of the worktop. Popular due to the ease of installation and convenience in cleaning: if necessary, water and other contaminants can be «driven» by a cloth from the table top directly to the sink. It is true that there is a small gap between the countertop and the sink where pollution can accumulate; but this disadvantage is compensated by the ease of installation.

Tabletop. Models fixed at the bottom of the countertop - so that the role of the sides actually play the edges of the hole cut under the sink. This method is convenient for maximum convenience in cleaning: from the kitchen table you can easily wipe into the sink spilled liquid or small debris like crumbs, while the contamination will not accumulate in the gap between the sink and the table top (As opposed to butt mounting, see corresponding paragraph. ). At the same time,...the installation of such shells by itself is quite difficult.

Tabletop module. Quite specific installation method: the sink is installed on the floor top, replacing the table top. For such an installation, it is necessary that the box accurately corresponds to the sink in size, so this option is quite rare.