USA
Catalog   /   Automotive   /   Tyres & Rims   /   Car Jacks

Comparison Yato YT-1720 vs Yato YT-1719

Add to comparison
Yato YT-1720
Yato YT-1719
Yato YT-1720Yato YT-1719
from $64.52
Outdated Product
from $155.28
Outdated Product
TOP sellers
Typetrolleytrolley
Lifting mechanismhydraulichydraulic
Specs
Load capacity2 t1.25 t
Min. height89 mm80 mm
Max. lifting height359 mm375 mm
Weight16 kg12.5 kg
Added to E-Catalognovember 2016november 2016

Load capacity

The maximum weight the jack can lift. The perfect option is considered to be such a carrying capacity that exceeds the weight of the car (or other load lifted by the jack). At the same time, do not forget that the load on the jack usually does not have to be lifted entirely, one side of it is most often on the ground. This means that only part of the mass falls on the jack, and the maximum load may well be somewhat less than the total weight of the car being lifted: for example, for a one and a half ton passenger car, a 1 ton model is considered quite sufficient. For each class and weight category of machines, there are rules for choosing jacks according to the minimum load capacity; More details about these rules can be found in special sources.

Min. height

The parameter shows the minimum allowable distance between the supporting surface (ground, floor) and the jack in the lower working position, that is, the minimum height from which the machine starts to be raised. Before buying a tool, it is important to correlate this parameter with the minimum vehicle clearance.

Max. lifting height

This parameter shows to what maximum height the jack can lift the load. Usually, on average, this parameter is in the range from 30 to 50 cm, which is quite enough to change the wheel or access the handbrake cable. At the same time, rack jacks are capable of lifting loads to a height of up to 1 metre, although such tasks do not occur so often in domestic use.
Yato YT-1720 often compared