Comparison Syma S107G vs Syma S5

Operating time of an electric powered helicopter (see "Engine") on one battery charge or on one set of batteries. This parameter is rather conditional and approximate: it is usually indicated for optimal operating conditions, with a uniform low load on the engine (most often for hover mode), and when using replaceable cells — for high quality batteries. Accordingly, in fact, the operating time may differ markedly from that stated in the specifications. Nevertheless, this indicator quite reliably describes the battery life of the car, and different models can be compared according to it.

The frequency at which the helicopter control transmitter operates.

— 27.145 MHz. One of the frequencies used for radio remote control for a long time; in some CIS countries it is even reserved by state regulatory bodies for this very purpose. Such transmitters are relatively inexpensive, but suffer from one serious drawback: they do not provide channel separation when several consoles are operating in close proximity to each other. In other words, if the helicopter stays in the coverage area of two transmitters, the signals from them will be mixed, which is actually equivalent to a loss of control. This is most often unimportant in "recreational" flights; however, at competitions and other public events where several cars can be in the flight zone at the same time, very unpleasant and even dangerous situations can arise. You can avoid such situations by developing a common frequency grid and using interchangeable crystal oscillators for consoles — but such features are not always available. As a result, this frequency is gradually being replaced by the more advanced 2.4 GHz standard, not only among professional, but also among amateur models.

Separately, we note that transmitters with frequencies of 35, 40 and 75 MHz can also be found on the market; according to the main features, they are completely similar to the described 27.145 MHz and differ only in the operating frequency.

— 2.4 GHz. Today's most advanced communication standard used by remote control helicopters. Its main feature (and difference from the above options) is the possibility of normal operation of several transmitters of this format in close proximity to each other. To do this, various technologies are used that provide automatic distribution of receiver-transmitter pairs over their own channels (similar to how it happens, for example, in mobile communications). Theoretically, the 2.4 GHz band may be more prone to interference, as many modern electronics work in it (in particular, Wi-Fi and Bluetooth modules); however, thanks to the distribution of channels mentioned, such problems arise only in very unfortunate cases, but are solved easily and quickly. In addition, due to the coincidence in frequencies with the Wi-Fi standard, models for such remotes can be easily controlled from a smartphone (see below).

The greatest distance between the remote control and the helicopter at which the remote control transmitter is still able to guarantee normal controllability of the model. Note that official specifications usually provide data for perfect conditions: full battery charge, no obstacles in the signal path, extraneous interference, etc .; in fact, the range may be somewhat less. However, by this parameter it is quite possible to compare different models with each other.

The higher this indicator, the further you can let go of the helicopter from the remote control, the less often you have to move to keep control. However, a large range means not only a long range as such — it also speaks of a good signal penetration, its ability to pass through various obstacles. At the same time, powerful transmitters require appropriate power and large antennas, which affects the weight and dimensions of the console.

The type and number of batteries needed to operate the helicopter control panel.

— AA. Replaceable batteries, colloquially known as "AA batteries". They are available not only in the form of disposable batteries, but also in the form of rechargeable batteries, are produced under various brands that differ in price and quality (which provides freedom of choice), and finding such elements on the market is usually not a problem. The power and capacity of AA elements are relatively small, but in most cases they are quite enough for normal operation of the transmitter for quite a long time. Usually, modern remotes require several of these batteries — usually 2, 4 or 6.

— AAA. Also known as "pinky". In fact, a smaller version of popular AA elements (see above); has the same key features, but differs in more compact dimensions and, as a result, somewhat reduced power. This option is typical for low-cost class models, with a small range of the remote control.

General dimensions of the model. Note that the length and width are indicated only for the fuselage, excluding the main rotor. However, for ease of transportation, the blades are often made removable or folding.