Number of tiers
The number of tiers — a kind of "floors" — on which the drying rods are located. This parameter in our catalog is indicated only if there are more than one tiers. At the same time, street-type models (see above), which have a structure similar to an inverted umbrella, are not considered multi-tiered, since the rods are placed at different heights from the ground in them, but not by “floors”.
The presence of several tiers allows you to place more laundry on the drying rack with the same occupied area, however, the weight and price of the structure also increase accordingly. In addition, note that the distance between the tiers may not be sufficient for long items (for example, towels).
Drying shoes
The possibility of using a device
for drying shoes. Models with this function are supplemented with special pads; by type (see above) most of these dryers are conventional.
Hanger holder
The presence in the design of the drying rack of special devices for the placement of coat hangers. Such devices can be made as separate stands, and in
outdoor models(see "Type") they often have the form of openings at the ends of rigid rods that form the frame.
Technically, most drying racks allow you to use regular rods to place hangers, however, special
holders for hangers are much more convenient: in particular, when using them, the hanger will not move (whereas it can move back and forth along the rod), and there will still be a place on the main surface completely free.
Transport rollers
The presence of
rollers or other similar devices that allow you to roll the structure along the floor. Drying racks usually do not weigh so much as to create problems when carrying, even quite large ones; but with laundry hanging out, moving from place to place without rollers can be quite a challenge. In addition, transport rollers are often found in models with 3 — 4 tiers, which are inconvenient to carry, not so much because of their weight, but because of their bulkiness.
Material
The main material from which the dryer is made.
— Aluminium. These models, crafted from lightweight and usually affordable aluminium alloys, come with both low weight and cost. However, compared to steel, inexpensive aluminium alloys typically lag behind in terms of strength and durability. Additionally, continuous exposure to water may cause oxidation, resulting in potential stains. While high-quality alternatives address these issues, they come with a corresponding increase in cost.
— Steel. Modern dryers typically utilize two main types of steel: regular and stainless. Ordinary steel boasts good strength at a low cost, although it is heavier than aluminium, which is not a critical factor. However, ordinary steel is prone to rust when exposed to moisture, necessitating protective coatings that can compromise the product's reliability and durability. On the other hand, stainless steel shares the same advantages but is corrosion-resistant and offers long-term use. Its main drawback is the higher price.
— Aluminium/steel. Two design types fit into this category. The first involves combined products, where the stand and main frame are typically crafted from steel, while the bars are made of aluminium. As detailed above, both materials have their characteristics, and combining them slightly boosts the strength and reliability of the dryer while keeping costs low. Additionally, models are available in various materials, including "aluminium.../steel."
— Plastic. The main advantage of plastic as a material for dryers is complete chemical inertness — in other words, it does not oxidize from constant contact with moisture. At the same time, in terms of strength, plastic significantly loses to metals. Therefore, this option is used mainly in small-sized designs that are not designed for a large amount of laundry.
Dimensions (unfolded)
General dimensions of the drying rack in working position, taking into account all additional elements — side wings (see above), retractable parts (see "Design"), etc. This parameter will allow you to estimate how much space is required to use a particular model.
Dimensions (folded)
General dimensions of drying rack in the folded position. The smaller they are, the more convenient this model is in storage and transportation.
