Comparison Marantz PM6006 vs Marantz PM6005
Add to comparison |  |  |
|---|---|---|
| Marantz PM6006 | Marantz PM6005 | |
from $693.28 up to $766.80 | from $650.00 up to $728.00 | |
| User reviews | ||
| TOP sellers | ||
| Device type | integrated amplifier | integrated amplifier |
| Element base | transistor | transistor |
| Toroidal transformer |  | |
Amplifier parameters | ||
| Number of channels | 2 | 2 |
| Frequency range | 10 – 50000 Hz | 10 – 50000 Hz |
| Power per channel (8Ω) | 40 W | 45 W |
| Power per channel (4Ω) | 55 W | 60 W |
| Signal to noise ratio | 102 dB | 102 dB |
| Signal to noise ratio (Phono MM/MC) | 83 dB | 83 dB |
| Damping factor | 100 | 100 |
| Harmonic distortion | 0.08 % | 0.08 % |
Channel sensitivity / impedance | ||
| Line input | 200 mV 20 kOhm | 200 mV 20 kOhm |
| Phono MM/MC | 2.2 mV 47 kOhm | 2.2 mV 47 kOhm |
Connectors | ||
| Inputs | Phono coaxial S/PDIF optical control input (IR) | Phono coaxial S/PDIF optical control input (IR) |
| RCA | 4 pairs | 4 pairs |
| Outputs | control output (IR) | control output (IR) |
| For acoustics | 4 шт | 4 шт |
| REC (to recorder) | 1 pairs | 1 pairs |
| On headphones | 6.35 mm (Jack) | 6.35 mm (Jack) |
| Front panel | indicators headphone output | indicators headphone output |
Features | ||
| Adjustments | bass control treble adjustment balance adjustment level adjustment loudness | bass control treble adjustment balance adjustment level adjustment loudness |
| More features | By-pass/Direct auto power off ММ phono stage additional speaker connect Bi-Wiring external devices control | By-pass/Direct auto power off ММ phono stage additional speaker connect Bi-Wiring external devices control |
General | ||
| Remote control | | |
| PSU | internal | internal |
| Power consumption | 155 W | 155 W |
| Standby consumption | 0.3 W | 0.3 W |
| Dimensions (WxDxH) | 440x370x105 mm | 440x370x105 mm |
| Weight | 7.6 kg | 7.6 kg |
| Color | ||
| Added to E-Catalog | september 2016 | february 2014 |
Compare Marantz PM6006 and PM6005
You may be interested in
Marantz PM6006 often compared
Marantz PM6005 often compared
Glossary
Power per channel (8Ω)
The nominal sound power output by the amplifier per channel when operating with a load having a dynamic resistance (impedance) of 8 ohms. In our catalog, this parameter is indicated for the mode when all channels of the amplifier work under load (see "Number of channels"); in the presence of unused channels, the rated power may be slightly higher, but this mode cannot be called standard.
Rated power can be simply described as the highest output signal power at which the amplifier is able to work stably for a long time (at least an hour) without negative consequences. These are average figures, because in fact, the audio signal is by definition unstable, and individual level jumps can significantly exceed the rated power. However, it is she who is the main basis for assessing the overall loudness of the sound.
This indicator also determines which speakers can be connected to the amplifier: their rated power should not be lower than that of the amplifier.
According to the laws of electrodynamics, with different dynamic load resistance, the output power of the amplifier will also be different. In modern speakers, the standard values \u200b\u200bare 8, 6, 4 and 2 Ohms, and power levels are indicated for them.
Rated power can be simply described as the highest output signal power at which the amplifier is able to work stably for a long time (at least an hour) without negative consequences. These are average figures, because in fact, the audio signal is by definition unstable, and individual level jumps can significantly exceed the rated power. However, it is she who is the main basis for assessing the overall loudness of the sound.
This indicator also determines which speakers can be connected to the amplifier: their rated power should not be lower than that of the amplifier.
According to the laws of electrodynamics, with different dynamic load resistance, the output power of the amplifier will also be different. In modern speakers, the standard values \u200b\u200bare 8, 6, 4 and 2 Ohms, and power levels are indicated for them.
Power per channel (4Ω)
The nominal sound power output by the amplifier per channel when a load with a dynamic resistance (impedance) of 4 ohms is connected to it. See Power per Channel (8Ω) for more information on power rating and its relationship to impedance.