USA
Catalog   /   Automotive   /   Car Audio   /   Car Stereos

Comparison Alpine UTE-80B vs Alpine CDE-180

Add to comparison
Alpine UTE-80B
Alpine CDE-180
Alpine UTE-80BAlpine CDE-180
from $71.20 up to $84.20
Outdated Product
from $139.00
Outdated Product
TOP sellers
Application areacarcar
DIN size1DIN1DIN
Front panel
detachable
detachable
Media types
 
USB storage (front)
iPod/iPhone connection
CD
USB storage (front)
 
Equalizer
Number of bands33
Number of fixed settings1010
High Pass Filter (HPF)
Low Pass Filter (LPF)
Bass Boost function
Amplifier specs
Power per channel50 W50 W
Number of channels44
Control
Control functions
remote control
steering wheel controls
remote control
steering wheel controls
Outputs
Speaker connectionISOISO/RCA
Line out2
Inputs
front AUX
More features
Tuner bands
FM/MW/LW /memory for 24 stations/
FM/MW/LW /memory for 30 stations/
Backlightblue
Added to E-Catalogaugust 2014february 2014

Media types

Media types supported by the car radio.

— CDs. Support for optical discs usually assumes at least compatibility with CD, the ability to work with DVD is somewhat less common . For more information about these types, see "Disk Types". Here we note that nowadays, disks are gradually being replaced by more compact and functional media — in particular, memory cards and USB devices; so many modern radio tape recorders, including high-end ones, do not have optical drives at all.

Memory cards. Ability to work with removable memory cards, usually SD or microSD; the module for reading them is called a card reader. This feature is convenient primarily because such cards are supported by many other devices — in particular, laptops and photo / video cameras. The card reader facilitates the exchange of data between these devices: for example, a selection of music from a laptop can be written to a memory card. Note that the specific type of supported cards needs to be specified separately — the (micro)SD format includes several varieties that are not quite compatible with each other.

USB drive (front). The ability of the radio to work with external USB-drives — " flash drives ", hard drives, MP3 players, etc. — to pla...y content directly from them. In this case, it means connecting such media to the USB connector located on the front panel of the radio — it is convenient because the connector is in close proximity, right at hand.

USB drive (rear). Connecting USB drives (see above) through the rear panel. However, the external device is connected not directly to the rear panel, but to an external USB connector, which, in turn, is connected to the rear panel with a cable. Such a connector does not take up space on the front panel, but you can place it on a shelf under the dashboard — and the connected drive will not stick out of the radio, but lie neatly on the shelf. But in standard radios (see above), the “rear” connection can be carried out a little differently — there the cable from the rear panel can be connected to the standard USB socket on the instrument panel using a special connector.

Connecting an iPod/iPhone. The ability to connect portable devices from Apple to the radio — primarily iPods and iPhone smartphones — through a special docking connector. Even the simplest options for such a connection, in addition to playing music, provide a number of additional features — in particular, control of the player's functions (for example, switching a track) from the control panel or remote control of the radio itself. And the most advanced models have a proprietary CarPlay system; for more information about it, see "Control functions".

Android connection. The ability to connect smartphones and other devices based on the Android operating system to the radio. Connection methods may vary: for example, some radio models support only a wired connection, others can use Bluetooth (see "Multimedia"). The same applies to the set of functions available in each case, this point should be clarified according to the manufacturer's official data. Specific features include direct playback of music from the phone (with control through the radio), working with the contents of its drive, watching videos, using the radio as a car kit for receiving calls, etc. And in high-end models, there is support for Android Auto smartphone integration technology; for more information about it, see "Control functions".

Speaker connection

The type of connectors used to connect an acoustic system (in other words, speakers) to the radio tape recorder.

— RCA. With this connection, tulip-type connectors are used to connect the radio and speakers; while each column has its own separate connector. Such an interface is quite difficult to connect, so it is relatively rare.

— ISO. The interface used to connect to the radio and acoustics, and power. It is a single plug to which all the corresponding wires are connected. Thus, the process of installing a radio with an ISO interface is as simple as possible: just connect the plug to the appropriate connector — and the device is ready for use. Most cars of recent years of production are equipped with an ISO connector, and if it is not available, you can buy and install such a connector separately.

— ISO/RCA. The main connection in such radios is carried out according to the ISO standard, and the RCA interface is used as an additional one — for example, to output to a subwoofer.

Line out

The number of line outputs (see above) provided in the design of the radio. It should be noted that usually these outputs use RCA connectors (“tulip”), and the analog format allows only one audio channel to be transmitted through one such. Therefore, to work with a stereo signal, two RCA connectors are required, and just a pair of such jacks is considered to be one line output - a set designed for one set of stereo speakers. The main difference between this interface and the same RCA used to connect speakers (see above) is that the line output receives a signal from a preamplifier that is unsuitable for feeding to passive acoustics. Such a signal must be sent to active speakers or an external amplifier (whereas the speaker is connected to the output of a power amplifier designed for passive speakers).

Backlight

The colour of the backlight plays primarily an aesthetic role, allowing you to choose a radio for the design of the dashboard and user preferences. In addition, some colours have a practical meaning. So, the red backlight is extremely popular nowadays also because it is almost perfect for the dark time of the day: this shade does not knock down "night vision" and has a stimulating effect on the nervous system. And green, on the contrary, relieves excessive nervousness and promotes peace of mind. Other popular colours in modern times include white, blue, orange, yellow, purple ; they do not have such pronounced effects, here the main selection criterion is “like or dislike”.

Also note that in many models several backlight colours are indicated at once. This means that the device has a backlight with adjustable colour selection. At the same time, there are models with a choice of a full range of RGB colours.
Alpine UTE-80B often compared
Alpine CDE-180 often compared