USA
Catalog   /   Automotive   /   Car Audio   /   Reversing Cameras

Comparison Gazer CC100 Universal vs Gazer CC125

Add to comparison
Gazer CC100 Universal
Gazer CC125
Gazer CC100 UniversalGazer CC125
from $42.00 up to $52.18
Outdated Product
from $55.72 up to $65.27
Outdated Product
TOP sellers
Typereversing camerareversing camera
Instalation typeuniversaluniversal
Camera
Sensor typeCMOSCMOS
Sensor size1/4 "1/4 "
Video resolution720х576 px720х576 px
Video resolution (TVL)540540
Camera angle170 °170 °
Сolour encoding systemNTSCNTSC, PAL
Signal-to-noise ratio46 dB46 dB
Min. illumination0.1 lux0.1 lux
Image modemirrormirror / non-mirror
Features
More features
parking marks
waterproof
parking marks
waterproof
Added to E-Catalogmay 2016february 2016

Сolour encoding system

The colour system refers to the format in which colour information is transmitted in an analogue video signal. In modern reversing cameras, the European PAL system or the American NTSC are most often used. It makes no sense to describe them in detail — suffice it to say that for the normal operation of the camera you need a radio tape recorder (or other device with a screen on which the image is displayed) with support for the same colour system. However, incompatibility in this parameter is not fatal — with such a connection, the image will only turn from colour to black and white (in extreme cases, its overall quality will slightly deteriorate).

Image mode

The format for displaying the image on the connected screen. For each type of review (see above), there is a different option that is optimal.

— Direct. The traditional way of displaying an image: the user sees on the screen the same thing that the camera lens "sees" in front of him, with the same arrangement of the details of the situation. Simply put, if some object is located to the left of the centre of the camera's field of view, it will also be visible on the screen on the left side. All front view cameras work this way.

— Mirror. In this mode, an image is displayed on the screen that is “mirrored” horizontally — roughly speaking, one in which “left” and “right” are reversed: an object to the left of the camera lens will be visible on the right side of the screen, and vice versa. All cameras with a rear view type work in a similar way. This is due to the fact that in an ordinary rear-view mirror the driver sees exactly the picture inverted horizontally; therefore, in order for the sides of the picture on the screen to correspond to the usual view in the mirror, the image coming from the camera has to be “mirrored”.

— Direct / mirror. Cameras capable of operating in any of the picture modes described above. Usually, these are universal models (see “Installation”), which formally refer to the rear view type in our catalog (see above), but also allow front view.
Gazer CC100 Universal often compared
Gazer CC125 often compared