USA
Catalog   /   TVs & Video   /   TV Antennas

Comparison Hama HD38 vs FIRST Austria FA 3100

Add to comparison
Hama HD38
FIRST Austria FA 3100
Hama HD38FIRST Austria FA 3100
Outdated Product
from $16.00
Outdated Product
TOP sellers
Signal reception
Analogue TV
DVB-T/T2
FM radio
Analogue TV
DVB-T/T2
FM radio
Specs
Instalation typeindoorindoor
Amplification coefficient38 dB40 dB
UHF frequency range30 – 950 MHz40 – 860 MHz
Output impedance75 Ω
Amplifier
Gain control
Variable tilt angle
General
Cable length1.5 m
Size21.5x12 cm56.6x23.7x51 cm
Antenna length12 cm
Added to E-Catalogaugust 2017may 2016

Amplification coefficient

The amount of received signal amplification provided by the antenna. The higher this indicator, the more confidently the antenna will work in conditions of poor reception, the lower the signal level at which it will be ineffective. At the same time, it is worth considering that a high amplification coefficient is not a guarantee of high quality. Firstly, unscrupulous manufacturers and sellers may indicate figures in the specifications that do not correspond to real indicators. Secondly, the antenna amplifies not only the useful signal, but also various interferences, and in some cases a low amplification coefficient is preferable (for example, in dense multi-storey buildings, when the signal reaches the antenna from different directions and with different delays). And thirdly, performance above 40 dB can only be achieved using amplifiers (see below) — and amplifiers are also a source of noise, which in some situations can be quite noticeable.

UHF frequency range

The frequencies of the UHF range for which the antenna is designed. UHF includes frequencies from 300 MHz to 3 GHz, however, frequencies above 900 MHz are practically not used in terrestrial television broadcasting, so TV antennas cover only the lower part of UHF. Also note that some manufacturers indicate a general range for their models, without dividing it into VHF (see above) and UHF; in such cases, this range is also indicated in this section.

Antenna sellers generally choose to sell models that are compatible with local frequencies. Therefore, in general, the frequency range is a rather specific parameter that the average user rarely needs — except when buying an antenna in another country.

Output impedance

The internal resistance of the antenna to alternating current. The standard value for modern TV antennas is 75 ohms; it is this impedance that the connecting cable used to connect the antenna to the receiver should have — otherwise there can be no question of normal use.

Gain control

The ability to control the built-in amplifier allows to stabilize the wave impedance between the antenna cable and the receiver. This prevents overloading, which in turn affects signal quality. Often, television antennas with a gain control option are equipped with their own 12 V power supply.

Variable tilt angle

The capability to change the tilt angle of the antenna relative to the stand or mount (for indoor and outdoor, respectively, see "Installation type"). This feature can greatly facilitate the selection of the optimal position, especially if the antenna has a narrow directivity or is used in urban areas with an abundance of reflected signals.

Cable length

The length of the connecting cable supplied with the antenna (often non-detachable). Quite a lot of models come with a cable right away, which eliminates the need to purchase it separately. And knowing the length of the cable, you can evaluate whether it is enough to reach the TV without additional cables.
FIRST Austria FA 3100 often compared