USA
Catalog   /   TVs & Video   /   TV Antennas

Comparison Thomson ANT1624 vs Hama 44286

Add to comparison
Thomson ANT1624
Hama 44286
Thomson ANT1624Hama 44286
from $31.96 up to $35.96
Outdated Product
from $18.00
Outdated Product
TOP sellers
Signal reception
Analogue TV
DVB-T/T2
FM radio
Analogue TV
DVB-T/T2
FM radio
Specs
Instalation typeindoorindoor
Amplification coefficient40 dB36 dB
UHF frequency range30 – 950 MHz47 – 870 MHz
Output impedance75 Ω
Amplifier
Gain control
Variable tilt angle
General
Cable length1.5 m
Size12x32x12 cm
Added to E-Catalogoctober 2016december 2015

Amplification coefficient

The amount of received signal amplification provided by the antenna. The higher this indicator, the more confidently the antenna will work in conditions of poor reception, the lower the signal level at which it will be ineffective. At the same time, it is worth considering that a high amplification coefficient is not a guarantee of high quality. Firstly, unscrupulous manufacturers and sellers may indicate figures in the specifications that do not correspond to real indicators. Secondly, the antenna amplifies not only the useful signal, but also various interferences, and in some cases a low amplification coefficient is preferable (for example, in dense multi-storey buildings, when the signal reaches the antenna from different directions and with different delays). And thirdly, performance above 40 dB can only be achieved using amplifiers (see below) — and amplifiers are also a source of noise, which in some situations can be quite noticeable.

UHF frequency range

The frequencies of the UHF range for which the antenna is designed. UHF includes frequencies from 300 MHz to 3 GHz, however, frequencies above 900 MHz are practically not used in terrestrial television broadcasting, so TV antennas cover only the lower part of UHF. Also note that some manufacturers indicate a general range for their models, without dividing it into VHF (see above) and UHF; in such cases, this range is also indicated in this section.

Antenna sellers generally choose to sell models that are compatible with local frequencies. Therefore, in general, the frequency range is a rather specific parameter that the average user rarely needs — except when buying an antenna in another country.

Output impedance

The internal resistance of the antenna to alternating current. The standard value for modern TV antennas is 75 ohms; it is this impedance that the connecting cable used to connect the antenna to the receiver should have — otherwise there can be no question of normal use.

Cable length

The length of the connecting cable supplied with the antenna (often non-detachable). Quite a lot of models come with a cable right away, which eliminates the need to purchase it separately. And knowing the length of the cable, you can evaluate whether it is enough to reach the TV without additional cables.
Hama 44286 often compared